Presentation is loading. Please wait.

Presentation is loading. Please wait.

EV CONTAINER CORPORATION - REVOLUTIONIZING THE BEVERAGE INDUSTRY EV Container Corporation EV EVkeg Liner Remove & Install Instructions.

Similar presentations


Presentation on theme: "EV CONTAINER CORPORATION - REVOLUTIONIZING THE BEVERAGE INDUSTRY EV Container Corporation EV EVkeg Liner Remove & Install Instructions."— Presentation transcript:

1 EV CONTAINER CORPORATION - REVOLUTIONIZING THE BEVERAGE INDUSTRY EV Container Corporation EV EVkeg Liner Remove & Install Instructions

2 Liner Removal - Fully depressurize the keg - Disengage the handle lock with a flat head screw driver and rotate handle counter clockwise by hand: EV Container Corporation

3 Liner Removal – Warning! - There should never be a need to use a tool to remove the handle - The keg must be fully depressurized before the handle can be moved by hand - Never use a tool to turn the handle – serious injury may result if the handle is forcibly removed while the keg is under pressure EV Container Corporation

4 Liner Removal - Remove the handle assembly and old liner EV Container Corporation

5 Liner Removal - Rotate the handle counter clock wise to disengage the liner - Any remaining liquid can be poured out the liner EV Container Corporation

6 Liner Removal - Remove and discard old liner - The liner is made from recyclable materials EV Container Corporation 7

7 Liner Removal – Warning! Before the first use of your keg the handle assembly must be cleaned… EV Container Corporation

8 Liner Installation - Note the O’ring and bayonet slot in the base of the handle EV Container Corporation

9 Liner Installation - Remove the seal from the Ozone sanitized liner EV Container Corporation

10 Liner Installation - Insert into fitment opening EV Container Corporation

11 Liner Installation - Pull the fitment towards the handle base - Note the finger position – thumbs on the handle and fingers on the liner flange - Rotate handle until the fitment slot is located in the handle base EV Container Corporation

12 Liner Installation - Pull the fitment over the o’ring to create the seal EV Container Corporation

13 Liner Installation - Hold the outside rim of the fitment with one hand - Rotate the handle a ¼ turn clockwise to engage the thread with the handle base EV Container Corporation

14 Liner Installation – Warning! - Do not hold the liner against the valve cage as shown when turning the handle - There is a risk of puncturing the liner EV Container Corporation

15 Liner Installation - Check that the fitment has not been cross threaded - The thread should not be visible. An even gap between the fitment flange and handle base should be seen all the way round EV Container Corporation

16 Liner Installation - Position the spear end at the base of the liner - Compress the middle of the liner with the left hand EV Container Corporation

17 Liner Installation - Compress the top end of the liner with the right hand EV Container Corporation

18 Liner Installation – Warning! - Do NOT wrap the liner around the beer spear - This will make it more difficult for the liner to unwrap evenly within the keg leading to a possible liner failure under pressure EV Container Corporation

19 Liner Installation – Warning! - Ensure the spear end remains engaged in the base of the liner at all times - Avoid creating a fold as shown on installation as this will make it more difficult for the liner to open inside the keg EV Container Corporation

20 Liner Installation - Gently feed the liner into the keg opening EV Container Corporation

21 Liner Installation - Before locking the handle ensure the liner is not pinched by the handle EV Container Corporation

22 Liner Installation - Once in place, rotate the handle clockwise until you hear the handle lock snap in place and you see the lock tab opposite the “lock” indicator as shown EV Container Corporation

23 Liner Installation - Your keg is now ready for the purge and filling process EV Container Corporation

24 EVkeg – contact us EV Container Corporation 2148 Beechcraft Road Unit 300 Vacaville CA EV Container Corporation

25 EVkeg – made in the USA Thank you EV Container Corporation


Download ppt "EV CONTAINER CORPORATION - REVOLUTIONIZING THE BEVERAGE INDUSTRY EV Container Corporation EV EVkeg Liner Remove & Install Instructions."

Similar presentations


Ads by Google