1. S10A

2. Outline  S10A overview  S10A SPEC  S10A Option device  Target Application

3. S10A Overview

5. No.Component 1 Power LED Off: Power off Solid green: Power on / When in power off mode, lights green when charging. Blinking green: AC power on and the battery is charging 2HDD LED Lights green to indicate hard disk drive activity. 3 WLAN LED Off: No RF signal / No LAN connection Solid green: WLAN connected Blinking green: TX/RX transmission 4Microphone 5 S1 / Brightness button Functions as a barcode switch key when a barcode scanner is connected, otherwise, can be assigned as a function key (F4). When mode is enabled, press to decrease brightness. 6 S2 / Brightness button Can be assigned as a function key (F5). When mode is enabeld, press to increase brightness. 7Rubber bumper indents Lock the rubber bumpers 8Touch-sensitive display 9Speakers 10Function keys 11Fingerprint scanner 12Keyboard button 13Mode button 14 Enter button

6. No.Component 1 Left compartment Holds the camera and the hard disk drive Contains the barcode scanner connectors 2 Middle compartment WWAN connector SIM card slot 3 Right compartment Contains connectors for MSR, RFID, or GPS module 4 External battery contacts / Power switch 5 External battery lock 6 Battery / Memory compartment

7. No.Component 1 Microphone jack 2 Headphone jack 3 VGA port 4 Serial port No.Component 1 Power button 2 USB ports (2) 3 SD card slot 4 DC-in jack

9. No.ComponentFunction 1LAN portConnect an RJ-45 cable to access LAN connection. 2SerialConnect a serial cable to connect to another PC. 3USB portsConnect USB connectors to transfer data. 4DC-INConnect the AC adapter to charge the battery.

10. Tablet PC Docking You can use the docking stand to dock the tablet PC when you are at your home or on your office desk. When docked, you can charge both the internal and external batteries or transfer data from your tablet PC to another PC.Attach the S10A to the docking stand as shown.

11. External battery 3800mA / 42.2W External battery 3800mA / 42.2W

12. Option: GPS Feature  U-blox 5 Modulesfor GPS and GALILEO  Time To First Fix (TTFF): < 1 sec  Best-in-class acquisition and tracking sensitivity  Receives GPS and GALILEO signals  GPS: Supports u-blox AssistNow Online and Offline  High immunity to jamming  UART serial port, COM2 / 9600  Precision Timing option  External antenna connector: IPEX  U-blox 5 Modulesfor GPS and GALILEO  Time To First Fix (TTFF): < 1 sec  Best-in-class acquisition and tracking sensitivity  Receives GPS and GALILEO signals  GPS: Supports u-blox AssistNow Online and Offline  High immunity to jamming  UART serial port, COM2 / 9600  Precision Timing option  External antenna connector: IPEX

13. Option: 1D Barcode Scanner Feature  A "Trigger Key " button on front side  Light Source ： 617 nm visible LED  Optical System ： 2,500 pixels CCD  Depth of Field ： 40 – 235 mm (UPC/EAN 100%, PCS=90%)  Scan Rate ： 100 scans per second  Light Levels ： Max. 10,000 Lux (fluorescence)  Symbologies ： UPC/JAM/EAN, Code 39,Code93,Codabar,Interleave 2 of 5,Industries 2 of 5,Standard 2 of 5,IATA,ISBN/ISSN,Chinese post code, Code 11,MSI/Plessy,EAN- 128,Code 128  A "Trigger Key " button on front side  Light Source ： 617 nm visible LED  Optical System ： 2,500 pixels CCD  Depth of Field ： 40 – 235 mm (UPC/EAN 100%, PCS=90%)  Scan Rate ： 100 scans per second  Light Levels ： Max. 10,000 Lux (fluorescence)  Symbologies ： UPC/JAM/EAN, Code 39,Code93,Codabar,Interleave 2 of 5,Industries 2 of 5,Standard 2 of 5,IATA,ISBN/ISSN,Chinese post code, Code 11,MSI/Plessy,EAN- 128,Code 128

14. Option: MSR Feature  Reference Standards: ISO 7810, 7811  Recording Method: Two-frequency coherent phase (F2F)  Decoding Method: ISO: Track1 – IATA / Track2 – ABA / Track3 – THRIFT  Speed: Card speed through the unit may vary from 3 ips to 100 ips (7 cm/s to 250 cm/s)  Power Requirements: Low voltage operation: 3.3V  Message Format: RS232C / TTL: Programmable baud rate, (8, N, 1), ASCII (Default=19200 bps) ( COM 2 )  Reference Standards: ISO 7810, 7811  Recording Method: Two-frequency coherent phase (F2F)  Decoding Method: ISO: Track1 – IATA / Track2 – ABA / Track3 – THRIFT  Speed: Card speed through the unit may vary from 3 ips to 100 ips (7 cm/s to 250 cm/s)  Power Requirements: Low voltage operation: 3.3V  Message Format: RS232C / TTL: Programmable baud rate, (8, N, 1), ASCII (Default=19200 bps) ( COM 2 )

15. Option: WWAN Feature HSDPA features: 3GPP Release 5 3.6 Mbps, UL 384 kbps UE CAT. [1-6], 11, 12 supported Compressed mode (CM) supported according to 3GPP TS25.212 UMTS features: 3GPP Release 4 PS data rate – 384 kbps DL / 384 kbps UL CS data rate – 64 kbps DL / 64 kbps UL GSM / GPRS / EGPRS features: Data transfer UMTS/HSDPA: Triple band, 850//1900/2100MHz GSM/GPRS/EDGE: Quad band, 850/900/1800/1900MHz HSDPA features: 3GPP Release 5 3.6 Mbps, UL 384 kbps UE CAT. [1-6], 11, 12 supported Compressed mode (CM) supported according to 3GPP TS25.212 UMTS features: 3GPP Release 4 PS data rate – 384 kbps DL / 384 kbps UL CS data rate – 64 kbps DL / 64 kbps UL GSM / GPRS / EGPRS features: Data transfer UMTS/HSDPA: Triple band, 850//1900/2100MHz GSM/GPRS/EDGE: Quad band, 850/900/1800/1900MHz

16. Option: RFID Feature The RFID 13.56Mhz MIFARE® /DESFire® read/write module is designed for fast integration into portable, stationary readers or payment system etc. Interface ： 19200,N,8,1 (COM2). Serial Interface, CMOS-TTL. Frequency ： 13.56MHz Reading distance ： 2~5 cm Protocol ： GNET PLUS Card Type : ISO 14443A Mifare®1K / 4K / 8K Card Type Transponders supported ： Read/Write The RFID 13.56Mhz MIFARE® /DESFire® read/write module is designed for fast integration into portable, stationary readers or payment system etc. Interface ： 19200,N,8,1 (COM2). Serial Interface, CMOS-TTL. Frequency ： 13.56MHz Reading distance ： 2~5 cm Protocol ： GNET PLUS Card Type : ISO 14443A Mifare®1K / 4K / 8K Card Type Transponders supported ： Read/Write

17. CPU: – Intel ATOM Z530 1.6G Chipset: US15W BIOS:Award Memory: – 1G/2GB SO-DIMM (533MHz) VGA chip: US15W (Intel® GMA500) Display – 10.4” LED panel, XGA 1024 x 768 Touch Sensor – 4-wire resistive touch option sunlight readable Storage: – CF CFIII 4G/8G/32G or 1.8 SSD IO Port – One PCMCIA slot – One 4-in-1 card reader ( External memory card,SD1.0 ) – One RS-232 – Two USB 2.0 type A host port – One VGA output – Line-in x 1; Line-out x 1 – One Docking connector – DC-IN jack Wireless Communication: – 802.11 b/g/n – Bluetooth V2.0 O.S: – XP embedded / XP Pro embedded Standard Device: – CCD camera 2M – Fingerprint – TPM 1.2 Option Device: – RFID 13.56M – WWLAN GPRS/3G/3.5G – MSR 1+2+3 track – GPS Module – VESA mount – Stand Battery – Hot Swappable Battery – Main battery 1900mA 3S1P – Second battery 3800mA 3S2P Operating Temperature: – 0 ℃ ~ +40 ℃ Storage Temperature: – -20 ℃ ~ +60 ℃ Dimension: – 264x 213 x 18 mm Weight: – 1.2Kg Rugged Grade – IP54 sealing 3-foot drop

18. COUNTRYDOMAINSTANDARDS USA EMC FCC Part 15B DoC RadioFCC ID FCC Part 15C 15.247 (802.11 b/g) OtherSAR OET65C Europe Radio ETS/EN 300328 - WLAN(11 b/g ) ETS/EN 301489-1,-17 - WLAN (EMC) CB_Semko GS EN60950-1 OtherSAR EN62311 (50360/361) NBNotiyf Body (0681) TaiwanEMCBSMI CNS 13438---None JapanEMCVCCI V-3/02.04/V-4/02.04 Australia EMCC-Tick AS/NZS CISPR 22 RFC-Tick AS/NZS 4268 WEEE2002/96/EC Battery SafetyCE 60950 + EN 62133 SafetyUL 2054 Battery Pack---None AirD0-160D ( Section 21- Category M) Certification

19. EFB (Electronic flight bag)

20. Police officer System