1. Battery Watering Technologies

2. And now introducing…
The Centurion Valves!

3. Centurion Valve Low profile design.
Reinforced barbs eliminate the need for clamps.
Push in style valve for easy installation and removal.
All working parts are above the cell.

4. Centurion Valve Indicator eye visible from top and side.
Angled barbs to help navigate around connectors.
Solid polypropylene float.
No more flip top lid.
Ample spacing between the float and encapsulation.

5. Widest Pressure Range in the Business.
Centurion Valve
Widest Pressure Range in the Business.

6. Solid Polypropylene float
Technology
Solid Polypropylene float
Won’t allow Electrolyte to leach Into the float

7. Part #: DF72G (Direct Fill Gun)

8. Part # NT2000G (5 gallon gravity tank)
Part #: NT2212GF (2.5 gallon gravity tank)

9. Part #: NC5080P (8 gallon aqua sub)
Part #: NC5250P (25 gallon push cart)

10. Part #: PW-1800 Deionizer

11. Superior Warranty
We offer a full five year warranty that covers all aspects of a failure.
If the cell fails due to a defect in our product, we pay for the repair!

12. Manufactured in the USA
Manufacturing
MADE IN THE USA!
Manufactured in the USA

13. We Control the Process.
Better Products.
Superior Manufacturing.
Highest Quality Standards.

14. State of the art ISO 9000 certified Manufacturing Facility
ISO/TS Approved 2010 ISO14001 Approved 2010

15. Diversified 170 Employees 24 Hour Operation 85 To 1000 Ton Injection
Molding Machines
Ford Tier 1 Supplier
Chrysler Tier 1 Supplier
GM Tier 1 Supplier
Mercedes Approved Source

16. Product Update Filling pressure:
When using a BWT Direct Fill Gun/Link: PSI
Recommended fill pressures (into quick connect) 2-25 PSI. Up to 35 PSI can be used if recommendations below are followed.
Recommendations:
Avoid pulsating water supply (pump rapidly cycling on and off)
Always remove air from the line before filling

17. Product Update Filling outside of recommended pressure:
If below 2 PSI: Valves will continue to perform but filling time increases.
If above 25 PSI: Filling time will be reduced. It is possible that the final valve/cell to complete filling may close prematurely.

18. Single valve filling flow rate vs. fill pressure
Filling Flow Rate Chart:

19. Filling Flow Rate Valve String flow rate:
Valve String flow rate:
Total flow rate depends on number of valves in string, Filling pressure and connection method.
Typically 2-3 gallons/Minute at 20 PSI.
Many different delivery options can be utilized.

20. Manufacturing is ISO-9001, ISO/TS-16949 certified.
Quality Control
Manufacturing is ISO-9001, ISO/TS certified.
Each component part has a specific molding specification and testing procedure used during manufacture.
Each valve tested for shutoff, flow and mechanical freedom during the assembly process.
Sampling and water testing performed on each box of valves at manufacturing.
Incoming sampling and testing done on each box at BWT. Inventory is in quarantine until released by QC.
Valves visually inspected during kit assembly.

21. Spark Propagation/Spark Arresting
All valves have built in water trap (P Trap) to avoid cell-to-cell vapor transfer/Spark propagation.
Valves for electric vehicles have spark arrestor to avoid external spark from involving cell.

22. Technology

23. Technology

24. Technology

25. Technology

26. Technology

27. Indemnification
BWT carries a five million dollar product liability policy. Other Required Documents?

28. Great Customers, Great Partners
Thank You
Great Customers, Great Partners
The Highest Quality Products
Exceptional, personal customer service
Unmatched Support
Five Year Cell Replacement Warranty
Private Label Options