1. N EXUS T YRE P UMP

2. L IFE IS FULL OF UNEXPECTED RESULTS

3. What if…… You Missed that lucrative business deal because of a flat tyre?

4. Nexus Tyre Pump is the trusted, convenient & portable gadget that enables you to inflate your tyres at all times.

5. Easy Connection

6.  Plug the power cable connector into the cigarette lighter socket.  The car's ignition should be in the "on" position.  The Pump gauge will read zero. Pump Preparation

7.  Select the unit of (BAR/PSI) measure by pressing the knob marked "Unit“.  Set the target pressure by pressing the '+' or '-' knobs.  The maximum pressure is 10BAR/150PSI. Settings

8.  Attach the hose connector to the tyre valve stem.  A hissing sound is produced.  Quickly clip the thumb latch of the hose connector onto the tyre valve stem.  Make sure the hose connector is well connected to the tyre valve stem.  The Pump's gauge will show the tyre pressure reading. Connection to Tyre

9.  Press the 'ON' knob to start the Pump. The Pump compressor releases a motor noise as it inflates the tyre.  Once the target pressure is achieved then pump switches off automatically.  Press the 'OFF' knob to switch off the power supply.  When inflating, the car engine should be switched on in order to replenish the battery power Adding Pressure

10.  Press the hose connector onto the tyre valve stem to release air.  Do not clip the thumb latch of the hose connector.  When you estimate that enough air has been released, clip the thumb latch of the hose connector.  Confirm the latest tyre pressure with the gauge reading. Repeat as appropriate until the desired pressure is achieved. Reducing Pressure

11.  On completion, unclip the thumb latch of the hose connector.  Pull out the hose connector from the valve system.  Remove the power cable connector from the cigarette lighter socket.  Fold the hose into its storage compartment picture.  Insert the hose connector into its compartment and lock the thumb latch into position Completion and Storage (1)

12. Insert power cable connector into the grove compartment provided at the back of the pump. Completion and Storage (2)

13.  Fold the power connector cable into a double helix.  insert cable into its circular grove at the back of the Pump. Completion and Storage (3)

14. Open the storage bag of the pump. Completion and Storage (4)

15. Insert the assembled pump back into its storage bag and zip bag. Completion and Storage (5)

16. Store pump in your car at all times. Completion and Storage (6)

17. PUMP FEATURES AND SPECIFICATIONS

18. ILLUSTRATIONS(1)

19. ILLUSTRATIONS(2)

20. Adapters for Multi-purpose use  Adapter for sports balls  Adapter for mattresses and others  Adapter for rafts and others

21. Specifications