2. All-Rite Spring Company

3. Key Facts About All-Rite Spring ISO/TS 16949 registered. Factory and Warehouses 100,000 Sq. Ft. 60 employees operating 2 shifts. 60 spring lines operating daily. Average 1,200,000 parts produced daily. Over 250,000,000 parts produced yearly.

4. Key Facts About All-Rite Spring Delivering springs to Automotive, Aerospace, Agriculture, Construction, Electronics, Furniture, Housewares, Medical, Oil Production, and other industries around the globe.

5. Key Facts About All-Rite Spring Compression Springs Extension Springs Torsion Springs Clock/Power Springs

6. Key Facts About All-Rite Spring We combine experience and technology to produce springs for your industry.

7. Welcome to All-Rite Spring Company 2302 Spring Ridge Drive 2200 Spring Ridge Drive Spring Grove, Illinois

8. What We Do… Leading producer of spiral torsion (clock) springs. Our rolling mills provide wire range thicknesses from.018“ to.220” and widths of.050" to 1.375“. 20 proprietary CNC spring coilers provide a capacity for up to 100,000,000 clock springs per year.

9. What We Do… Precision manufacturer of torsion, double torsion, and extension springs. Over 50 CNC Shinko and Herdon coilers provide a capacity for springs with simple or complex end configurations. They also provide a wire range of.006" [0.15mm] to.413" [10.5mm] with non-contact gauging for precision ends.

10. What We Do… Provide standard and complex compression springs. We use traditional and modern CNC coilers to produce compression springs at rates up to 10,000 pieces per hour. The wire range for these machines is.006" [0.15mm] to.413" [10.5mm].

11. What We Do… Provide precision wireforms. Using custom and Herdon CNC equipment, our inline capabilities for wireforms include swaging, coining, punching, threading, and tapping. The wire range for these machines include diameters from.020" [0.51mm] to.625" [15.88mm].

12. What We Do… ISO/TS 16949:2009 registered quality management system First registered to ISO-9001 in 1999 First spring company in the world certified to CQI-9 stress relief by Ford Motor Company Lab testing of force/torque, hysteresis, set and plating or finishing

13. What We Do… -Feasibility and cost reduction analysis for current designs -Prototype processing and overnight delivery -Low cost 3-D printed springs to test form and fit -Production-representative samples -100% vision inspection, if required

14. What We Do… Provide additional operations and finishing after coiling. -Addition of internal or external sleeve or foams for noise reduction -Commercial and specialized zinc, nickel, or chrome finishing -Teflon or phosphate and soap coatings for clock springs -Special painting or marking for identification

15. Thank You!!!