Complexity – Pump Maintenance 40 bolts to torque to between 300 – 400 ft lbs in 50 ft lbs increments Only 8 Bolts and no torquing at all
Allen wrench & 2 lb hammer, 1 person required. Two persons are required to operate the torque wrench for NLB. Complexity – Pump Maintenance
2 Persons, up to 6 hours1 Person, 15 minutes Complexity – Pump Maintenance
Quality Manufacturing NLB uses painted steel tank. All Stainless steel wet components, water/debris tank – maintenance free
Last two NLB customers said the debris separation was non-existent. Water & Debris Separation System Water & Debris Separation
Waterblasting Heads NLB head uses belts, pulleys and external bearings Patented hydraulic thru-shafts – no belts, pulleys, external bearings or side load on ultra-high pressure shafts
Waterblasting Heads NLB heads use 4 swivel shaftsHog heads use 2 swivel shafts
Checking Sharpness of Jets Must exit the cab to see the jetsEasily and safely from the drivers seat
Spray Bars / Nozzles From 6 – 28, less expensive, more durable, change in under 5 minutes, no nozzle extenders, high cohesive nozzles, balanced for zero vibration More expensive, less durable, nozzle extenders
Spray Bar Protectors Expensive, hard to replaceInexpensive, easy to replace, durable
Spare Parts / Inventory System Actual picture of NLB systemComprehensive inventory system
Customer Support Online training videos, online parts ordering system, training & service bulletins, access upgrades available.
Compact – 36 long with tractor Single-tandem axle design, 43,000 lbs empty One engine efficiency – Less fuel, maintenance & exhaust (10 gal/hr for fuel Dual Steering Chassis - $130,000 Pump Maintenance - Very simple, no torque wrench or technical tools needed Same spare parts at cheaper prices – verified by several previous NLB customers Stainless steel for the wet components of water tanks Proven water & debris separation system Heads - Patented hydraulic thru-shafts – no belts, pulleys, external bearings or side load on ultra-high pressure shafts. Uses 2 swivel shafts. Contractor built & proven – built in test lab with contracting business of over 20 years 1 Stripe Hog customer has purchased 4 units, 3 customers have purchased 3 and 6 customers have purchased 2. Zero NLB customers have converted from Stripe Hog. 24/7 Phone Support – 1-772-223-7393 Easy online ordering of spare parts 24/7 with high quality photos for quick visual clarification – http://stripehogsupport.com Large and Bulky – 63 long with tractor 58,000 lbs empty Tri-axle combination truck & trailer design 3 engine Inefficiency (16 gal/hr for fuel) Single steering Chassis - $83,000 Pump Maintenance – Complex, 40 bolts and time consuming and meticulous torquing sequence Expensive Spare Parts Steel with paint for water tanks Non-existent water & debris separation – statement from the last two NLB customers Heads - uses belts, pulleys and external bearings, side load on ultra-high pressure shafts. Uses 4 swivel shafts. Manufacture only – test lab is their customers 6 NLB customers have converted to Stripe Hog Stripe Hog SH8000 NLB Starjet Plus
In the past 4 1/2 years more Stripe Hogs have been purchased worldwide than our top two competitors have sold in a collective 30 years! Waterblasting Technologies - Sole source provider for the premier marking and rubber removal system worldwide. Phone: 1-772-223-7393 Web: http://waterblastingtechnologies.com
Your consent to our cookies if you continue to use this website.