Presentation is loading. Please wait.

Presentation is loading. Please wait.

Programming Samsung DCS/iDCS/OfficeServ Click on Connection type 1.For SERIAL CONNECTION 2.For IP CONNECTION Exit.

Similar presentations


Presentation on theme: "Programming Samsung DCS/iDCS/OfficeServ Click on Connection type 1.For SERIAL CONNECTION 2.For IP CONNECTION Exit."— Presentation transcript:

1 Programming Samsung DCS/iDCS/OfficeServ Click on Connection type 1.For SERIAL CONNECTION 2.For IP CONNECTION Exit

2 System Programming for IP MMC 210 : PERI UCD SIO - OFF MMC 210 : PERI UCD REPORT - ON MMC 501 : UCD REPORT - 03 SECS MMC 725 : All YES except Page Header MMC 722 : Supervisor key (SP) for Group MMC 829 : [01] SMDR - Destination PC MMC 829 : [02] UCD Report - Destination PC MMC 829 : [06] PERI UCD - Destination PC MMC 830 : Assign IP address & Gateway - Card Reset

3 System Programming - SERIAL MMC 804 : Set to UCD/SMDR MMC 210 : PERI UCD SIO - ON MMC 210 : PERI UCD REPORT - ON MMC 501 : UCD REPORT - 03 SECS MMC 725 : All YES except Page Header MMC 722 : Supervisor key (SP) for Group

4 Handset Programming- PRINT Assign Auto Print Group Supervisor key Press SP Group Key Admin Print Auto On Hourly 59 (each 59 minutes past each hour)

5 Handset Programming - CLEAR Assign Auto Clear Group Supervisor key Press SP Group Key Admin Clear Auto On Daily 23:59 (Clears data daily at 23:59pm)


Download ppt "Programming Samsung DCS/iDCS/OfficeServ Click on Connection type 1.For SERIAL CONNECTION 2.For IP CONNECTION Exit."

Similar presentations


Ads by Google