Presentation is loading. Please wait.

Presentation is loading. Please wait.

Keypad / Display www.mcscontrols.com. Keypad/Display Mounting 6 wire shielded cable 10’ length 3 twisted pairs Keypad Three function keys Four directions.

Similar presentations


Presentation on theme: "Keypad / Display www.mcscontrols.com. Keypad/Display Mounting 6 wire shielded cable 10’ length 3 twisted pairs Keypad Three function keys Four directions."— Presentation transcript:

1 Keypad / Display

2 Keypad/Display Mounting 6 wire shielded cable 10’ length 3 twisted pairs Keypad Three function keys Four directions keys Two selection keys (Menu & Enter) Display 128 x 64 dot pixel graphics LCD 2.8” diagonal viewing area White characters on dark background (reversible)

3 Keypad/Display Graphics Display Function Keys Direction Movement Keys Menu Key, Enter Key & RS232 Communications Port

4 Menu Key Press Menu Key

5 Main Menu Press ‘F1’ For ‘Help’

6 Help Screen Press Menu Key

7 Main Menu Press ‘F2’ For Large

8 Large Font Press Menu Key

9 Main Menu Press ‘   ‘

10 Status (Unit - Wanted / Actual) Press ‘F3’ for Page Down

11 Status (Unit - Kw/Tons) Press ‘F3’ for Page Down

12 Status (CMP1 - Pressures/AMPS) Press ‘  ’

13 Status (CMP1 - Pressures/AMPS) Press ‘F3’ for Page Down

14 Status (CMP1 - Superheats) Press ‘  ’

15 Status (CMP1 - Superheats) Press ‘  ’

16 Press ‘F3’ for Page Down Status (CMP1 - Superheats)

17 Status (EXV 1) Press ‘F3’ for Page Down

18 Status (CMP2 - Pressures/AMPS) Press ‘  ’

19 Status (CMP2 - Pressures/AMPS) Press ‘F3’ for Page Down

20 Status (CMP2 - Superheats) Press ‘  ’

21 Status (CMP2 - Superheats) Press ‘  ’

22 Status (CMP2 - Superheats) Press ‘F3’ for Page Down

23 Status (EXV 2) Press ‘F3’ for Page Down To Loop The Menu

24 Status (Unit - Wanted / Actual) Press Menu Key

25 Main Menu Press ‘  ' Press ‘  ‘

26 Main Menu Press ‘   ‘

27 Outputs (Relay M-1 - Status) Press ‘  ’

28 Outputs (Relay M-1 - Last On) Press ‘  ’

29 Outputs (Relay M-1 - Last Off) Press ‘  ’

30 Outputs (Relay M-1 - Run Today) Press ‘  ’

31 Outputs (Relay M-1 - Cycles Today) Press ‘  ’

32 Outputs (Relay M-1 - Run Yesterday) Press ‘  ’

33 Outputs (Relay M-1 - Cycles Yesterday) Press ‘  ’

34 Outputs (Relay M-1 - Total Run Hours) Press ‘  ’

35 Outputs (Relay M-1 - Total Cycles) Press ‘  ’

36 Outputs (Relay M-1 - Status) Press ‘  ‘

37 Outputs (Relay M-2 - Status) Press ‘F3’ for Page Down

38 Outputs (Relay M-5 - Status) Press ‘   ‘

39 Outputs (Relay M-5 - Status - Change [Auto]) Press ‘  ‘

40 Outputs (Relay M-5 - Status - Change [ManOff]) Press ‘  ‘

41 Outputs (Relay M-5 - Status - Change [ManOn]) Press ‘   ‘

42 Outputs (Relay M-5 - [Change Made or Failed]) Press ‘   ‘

43 Outputs (Relay M-5 - Status) Press ‘F1’ for Analog

44 Outputs (Analog M-1 - Status) Press ‘   ‘

45 Outputs (Analog M-1 - Status - Change [Auto]) Press ‘  ’

46 Outputs (Analog M-1 - Status - Change [Man]) Press ‘  ’

47 Outputs (Analog M-1 - Status - Change [Man]) Press ‘  ’

48 Outputs (Analog M-1 - Status - Change [Man]) Press ‘   ‘

49 Outputs (Analog M-1 - [Change Made or Failed]) Press ‘   ‘

50 Outputs (Analog M-1 - Status) Press ‘  ‘

51 Outputs (Analog M-2 - Status) Press ‘F3’ for Page Down

52 Outputs (Analog Status) Press Menu Key

53 Main Menu Press ‘  ‘

54 Main Menu Press ‘   ‘

55 Inputs (Sensor M-1 - Value) Press ‘  ’

56 Inputs (Sensor M-1 - Type) Press ‘  ’

57 Inputs (Sensor M-1 - Last On) Press ‘  ’

58 Inputs (Sensor M-1 - Last Off) Press ‘  ’

59 Inputs (Sensor M-1 - Max Today) Press ‘  ’

60 Inputs (Sensor M-1 - Min Today) Press ‘  ’

61 Inputs (Sensor M-1 - Run Today) Press ‘  ’

62 Inputs (Sensor M-1 - Average Today) Press ‘  ’

63 Inputs (Sensor M-1 - Cycles Today) Press ‘  ’

64 Inputs (Sensor M-1 - Run Yesterday) Press ‘  ’

65 Inputs (Sensor M-1 - Max Yesterday) Press ‘  ’

66 Inputs (Sensor M-1 - Cycles Yesterday) Press ‘  ’

67 Inputs (Sensor M-1 - Min Yesterday) Press ‘  ’

68 Inputs (Sensor M-1 - Total Run Hours) Press ‘  ’

69 Inputs (Sensor M-1 - Average Yesterday) Press ‘  ’

70 Inputs (Sensor M-1 - Total Cycles) Press ‘  ’

71 Inputs (Sensor M-1 - Value) Press ‘   ‘

72 Inputs (Sensor M-1 - Value Change [Auto]) Press ‘  ‘

73 Inputs (Sensor M-1 - Type Change [MCST100]) Press ‘  ‘

74 Inputs (Sensor M-1 - Change [Exit]) Press ‘   ‘

75 Inputs (Sensor M-1 - Value) Press ‘  ‘

76 Inputs (Sensor M-2 - Value) Press ‘F3’ for Page Down

77 Inputs (Sensor M-5 - Value) Press Menu Key

78 Main Menu Press ‘  ‘

79 Main Menu Press ‘   ‘

80 Alarms (1 & 2) Press ‘F3’ for Page Down

81 Alarms (3 & 4) Press Menu Key

82 Main Menu Press ‘  ‘

83 Main Menu Press ‘   ‘

84 Graphs (SI- Chill Water In) Press ‘F3’ for Analog Outputs

85 Graphs (AO - EXV1) Press ‘F3’ for Relay Outputs

86 Graphs (RO - Compressor 1) Press ‘F2’ for Sensor Inputs

87 Graphs (SI - Chill Water In) Press ‘F1’ for Edit

88 Graphs (SI - Change Sample Rate) Press ‘  ’

89 Graphs (SI - Change Sample Rate) Press ‘   ‘

90 Graphs (SI - Change Made or Failed) Press Menu Key

91 Main Menu Press ‘  ‘

92 Main Menu Press ‘   ‘

93 Setpoints (1 - Value) Press ‘  ’

94 Setpoints (1 - Time) Press ‘  ’

95 Setpoints (1 - Column A) Press ‘  ’

96 Setpoints (1 - Column B) Press ‘  ’

97 Setpoints (1 - Column C) Press ‘  ’

98 Setpoints (1 - Value) Press ‘  ‘

99 Setpoints (2 - Value) Press ‘  ‘

100 Setpoints (3 - Value) Press ‘  ‘

101 Setpoints (105 - Value) Press ‘  ‘

102 Setpoints (108 - Value) Press ‘  ‘

103 Setpoints (1 - Value) Press ‘   ‘

104 Setpoints (Setpoint 1 - Value) Press ‘   ‘

105 Setpoints (Setpoint 1 - Set Value F) Press ‘  ’

106 Setpoints (Setpoint 1 - Set Value F) Press ‘   ‘

107 Setpoints (Setpoint 1 - [Change Made or Failed]) Press Menu Key

108 Main Menu Press ‘  ‘

109 Main Menu Press ‘   ‘

110 Service Tools (RS485 Network) Press ‘   ‘

111 Service Tools (RS485 Network - Protocol) Press ‘F1’ for Back

112 Service Tools (RS485 Network) Press ‘  ‘

113 Service Tools (Ethernet Network) Press ‘   ‘

114 Service Tools (Ethernet - Dynamic IP) Press ‘  ‘

115 Service Tools (Ethernet - IP Address) Press ‘  ‘

116 Service Tools (Ethernet - Subnet Mask) Press ‘  ‘

117 Service Tools (Ethernet - Default Gateway) Press ‘  ‘

118 Service Tools (Ethernet - MCS Port) Press ‘  ‘

119 Service Tools (Ethernet - Dynamic IP) Press ‘F1’ for Back

120 Service Tools (RS485 Network) Press ‘  ‘

121 Service Tools (Ethernet Network) Press ‘  ‘

122 Service Tools (System Info) Press ‘   ‘

123 Service Tools (System Info - Firmware Version) Press ‘F3’ for PG 

124 Service Tools (System Info - Company Name) Press ‘F3’ for PG 

125 Service Tools (System Info - Unit Serial Number) Press ‘F3’ for PG 

126 Service Tools (System Info - Config Version) Press ‘F3’ for PG 

127 Service Tools (System Info - Bootloader Version) Press ‘F3’ for PG 

128 Service Tools (System Info - Physical Mac Address) Press ‘F1’ for Back

129 Service Tools (RS485 Network) Press ‘  ‘

130 Service Tools (Ethernet Network) Press ‘  ‘

131 Service Tools (System Info) Press ‘  ‘

132 Service Tools (Time / Date) Press ‘   ‘

133 Service Tools (Time / Date - Hours) Press ‘  ‘

134 Service Tools (Time / Date - Minute) Press ‘  ‘

135 Service Tools (Time / Date - Second) Press ‘   ‘

136 Service Tools (Time / Date - Save Changes) Press ‘   ‘ Note: No authorization is required for a time change

137 Service Tools (RS485 Network) Press ‘  ‘

138 Service Tools (Ethernet Network) Press ‘  ‘

139 Service Tools (System Info) Press ‘  ‘

140 Service Tools (Time / Date) Press ‘  ‘

141 Service Tools (Display) Press ‘   ‘

142 Service Tools (Display - Contrast) Press ‘F1’ for Back

143 Service Tools (RS485 Network) Press ‘F3’ for PG 

144 Service Tools (Clear Alarm Hisotory) Press ‘   ‘

145 Service Tools (Clear Alarm History - Yes) Press ‘  ‘

146 Service Tools (Clear Alarm History - No) Press ‘   ‘

147 Service Tools (Clear Alarm History) Press ‘  ‘

148 Service Tools (Clear Point Info) Press ‘   ‘

149 Service Tools (Clear Point Info - Yes) Press ‘   ‘

150 Service Tools (Change Made / Higher Auth Required) Press ‘   ‘

151 Service Tools (Clear Point Info) Press ‘  ‘

152 Service Tools (Sensor Diagnostics) Press ‘   ‘

153 Service Tools (Sensor Diagnostics - M-1) Press ‘F1’ for Back

154 Service Tools (RS485 Network) Press ‘F3’ for PG 

155 Service Tools (Clear Alarm History) Press ‘  ‘

156 Service Tools (Clear Point Info) Press ‘  ‘

157 Service Tools (Sensor Diagnostics) Press ‘  ‘

158 Service Tools (Config Checksums) Press ‘   ‘

159 Service Tools (Config Checksums - # 0) Press ‘F1’ for Back

160 Service Tools (RS485 Network) Press ‘F3’ for PG 

161 Service Tools (Clear Alarm History) Press ‘  ‘

162 Service Tools (Clear Point Info) Press ‘  ‘

163 Service Tools (Sensor Diagnostics) Press ‘  ‘

164 Service Tools (Config Checksums) Press ‘  ‘

165 Service Tools (Operating Schedule) Press ‘   ‘

166 Service Tools (Operating Schedule - Sunday) Press ‘F1’ for Back

167 Service Tools (RS485 Network) Press ‘F3’ for PG 

168 Service Tools (Clear Alarm History) Press ‘F3’ for PG 

169 Service Tools (Holiday Dates) Press ‘   ‘

170 Service Tools (Holiday Dates - # 1) Press ‘   ‘

171 Service Tools (Holiday Dates - # 1 - Month[ ] ) Press ‘  ‘

172 Service Tools (Holiday Dates - # 1 - Month[ Jan ] ) Press ‘   ‘

173 Service Tools (Holiday Dates - Change Made / Higher Auth Required) Press ‘   ‘

174 Service Tools (Holiday Dates - # 1) Press ‘F1’ for Back

175 Service Tools (RS485 Network) Press ‘  ‘

176 Service Tools (BACnet Settings) Press ‘   ‘

177 Service Tools (BACnet Settings - Device ID) Press Menu Key

178 Main Menu Press ‘  ‘

179 Main Menu Press ‘   ‘

180 Lockout Reset (Yes / No Lockouts) Press Menu Key

181 Main Menu Press ‘  ‘

182 Main Menu Press ‘   ‘

183 Lockout Alarm (Alarm 1) Press ‘  ‘

184 Lockout Alarm (Alarm 1) Press ‘  ’

185 Lockout Alarm (Alarm 1) Press ‘  ’

186 Lockout Alarm (Alarm 1) Press ‘  ’

187 Lockout Alarm (Alarm 1) Press ‘  ’

188 Lockout Alarm (Alarm 1) Press ‘  ’

189 Lockout Alarm (Alarm 1) Press ‘  ’

190 Lockout Alarm (Alarm 1) Press ‘  ’

191 Lockout Alarm (Alarm 1) Press ‘  ’

192 Lockout Alarm (Alarm 1) Press ‘  ’

193 Lockout Alarm (Alarm 1) Press ‘  ’

194 Lockout Alarm (Alarm 1) Press ‘  ’

195 Lockout Alarm (Alarm 1) Press ‘  ’

196 Lockout Alarm (Alarm 1) Press ‘  ’

197 Lockout Alarm (Alarm 1) Press ‘  ’

198 Lockout Alarm (Alarm 1) Press ‘  ’

199 Lockout Alarm (Alarm 1) Press ‘F3’ for Next

200 Lockout Alarm (Alarm 2) Press Menu Key

201 Main Menu Press ‘  ‘

202 Main Menu Press ‘   ‘

203 Password Press ‘F1’ for 1

204 Password Press ‘F1’ for 1

205 Password Press ‘F1’ for 1

206 Password Press ‘F1’ for 1

207 Password Press ‘   ‘

208 Password Accepted Press Menu Key

209 Main Menu

210 You are automatically logged out if no key is pressed for 15 minutes You may logoff by putting any invalid code in Password You are limited to how many lockout resets you can do in 1 day After the limit, a Factory Authorization is required to reset Password & Lockout Reset


Download ppt "Keypad / Display www.mcscontrols.com. Keypad/Display Mounting 6 wire shielded cable 10’ length 3 twisted pairs Keypad Three function keys Four directions."

Similar presentations


Ads by Google