Presentation is loading. Please wait.

Presentation is loading. Please wait.

PCM and Analog 3.0 Features. Page 2 Analog – Assign Default DID to Trunk Group New feature in 3.0: Default DID entered can be used to route call to AA,

Similar presentations


Presentation on theme: "PCM and Analog 3.0 Features. Page 2 Analog – Assign Default DID to Trunk Group New feature in 3.0: Default DID entered can be used to route call to AA,"— Presentation transcript:

1 PCM and Analog 3.0 Features

2 Page 2 Analog – Assign Default DID to Trunk Group New feature in 3.0: Default DID entered can be used to route call to AA, Operator Group, ACD Group, or user with DID This setting is only relevant to Japanese DID

3 Page 3 Analog Enhancements The ability to forward a call from an analog interface now means: –Multiple auto attendants for analog groups –The ability to emulate analog DIDs Also the MX30 and MX250 now have DTMF caller ID support for analog FXO interfaces.

4 Page 4 PCM – ISDN Settings Window accessed from button on PCM Voice Tab Sensible defaults allow connection with vast majority of PSTN switches straight away This window makes adjustable by VAR or direction from Zultys support – what used to require custom patches

5 Page 5 MFCR2 Protocol for E1 Circuits E1 ETSI ISDN PRI is used in many places in the world Older E1 R2 protocol still in use –and only option in some regions of Latin America SE Asia India Generic protocol and special variants for Brazil and Mexico supported

6 Page 6 MFCR2 Protocol for E1 Circuits How to select the different MFCR2 Protocol variants. Brazil_NCC blocks incoming collect calls.

7 Page 7 MFCR2 Settings Same concept as the PRI settings Defaults work well with most switches Screen lets you configure different options –depending on switch you connect to –typically under the direction of Zultys support or VAR

8 Page 8 Provision | Clock Source Select primary circuit for recovering clock timing –used by MX Not related to NTP or system time –related to timing for digital telecom interfaces Set priority for backup clocks –in case primary circuit fails


Download ppt "PCM and Analog 3.0 Features. Page 2 Analog – Assign Default DID to Trunk Group New feature in 3.0: Default DID entered can be used to route call to AA,"

Similar presentations


Ads by Google