1. ALOKRAJ. V - NA07B004

2. High Pressure Water Jet Blasting Machine  One Electric driven water blasting machine  2 water jet guns, hoses 400 feet each as minimum, a section of nozzle including the fan nozzles for cleaning the flat surface and multiple nozzles with reinforced hose for internal cleaning of pipe lines.  The discharge will include pressure monitoring indicators, relief valve, bye pass valve and rupture disc protection as minimum.  The high pressure water jetting will include dual flow splitter for 2 nos water guns to be operated at the same time.

3. High Pressure Water Jet Blasting Machine

4. Deck Power Supply.  There should be two deck power supply connections box on the working deck.  Power Supply: 300 KW, 415 V, 50 Hz, 3 Phase for each location. Covered Fabrication Area.  Approx 10M x 5 M preferably on Main deck.  The fabrication area to have over head movable lifting beam of approx 2 T SWL.

5. Racks.  Two sets of Racks each to be provided for storage of Scaffolding, Plates, Pipes.  The Racks to be bolted on the Main Deck so that these can be removed if required. Breathing Air Compressor.  One breathing air compressor to be provided on board for charging the EEBD(Emergency Escape Breathing Device) and SCBA cylinders. (Self- contained breathing apparatus).  The compressor to have necessary filtration and to be certified for Breathing Air charging.  Air quality test certificate to be provided.

6. Breathing Air Compressor

7. Welding Rod Holding Oven.  Temperature Range 3 to 300 deg Celsius.  Capacity 200 Kg. Welding Rod Baking Oven.  Temperature maximum 500 deg Celsius  Capacity 200 Kg  Atleast one of each are installed on the vessel

8. Work Dory. One work dory of below mentioned specification to be placed on board  Steel hull construction  Minimum 8 meter length.  The Boat to be equipped with  Proper stowage and certified lifting lugs/dedicated slings for launch / recovery by crane in to the boat cradle.  Splash proof, intrinsically safe VHF radio with extension speaker and microphone  Built in 200 Gallon fuel tank with drain cock

9.  Demountable mast with navigational lights.  Wooden or rubber non slip flooring.  Hull Anodes.  All round rubber fendering and tubular guard for the propellers.  Complete safety items such as (Oars, rowlocks, torch, flares, anchor and chain, medical kit and life vests.)