1. With over 60 years experience Mondial Forni ensures the highest baking quality and maximum reliability in their ovens. The Ciclomondial combustion gas recirculation deck ovens are suitable for baking many different types of product. Ciclothermic deck ovens are heated by hot air ducted to the top and bottom of each deck. To ensure high- speed circulation and consequently, even heat distribution, the ducts convey hot gases into manifolds at the back of the oven where a circulation fan is fitted. Combustion gases are partly recycled to optimize energy efficiency and partly discharged via the flue. Flue draught adjustment is set when commissioning the oven; no further adjustment is required during normal use. Comprising of: Stainless steel front, loading end and external extract canopy for easy cleaning, in compliance with the sanitation standards and for long durability of the materials. Tempered glass balanced doors opening downwards, allowing a perfect view of the product during baking cycle, easy to remove for cleaning without using any tools. Steam generators placed in direct contact with the combustion smokes, for a large steam production and a quick recovery time. Baking decks equipped with a steam generator overpressure discharge system ensuring the ideal baking conditions Electronic control panel with standard oven automatic ignitions, equipped with digital displays showing steaming and baking time for each deck. Possibility to place the combustion gas recirculation fan at the top of the oven (optional) instead of at the back allowing the oven to be placed everywhere in the bakery (three sides can be inaccessible). Possibility to bake with different temperatures at the same time. Maximum difference: about 50°C in the top decks thanks to the MIX device (optional). Available options: MIX device for dual temperatures Stainless steel steam exhauster Additional steam generator to feed a prover Loading end with balanced doors opening upwards AISI 304 stainless steel perimeter, AISI 304 stainless steel doors (instead of glass) Hydraulic by-pass control unit Temperature and baking time display on the extract canopy (only models with MIX device) Top combustion gas recirculation fan (instead of rear) One-door kit for automatic loader / unloader Deck crown heights different from standard Mobile setters hooking with triangular section Electromechanical control panel Kit for lateral steam exhauster (right or left-hand side) CICLOMONDIAL SERIES DECK OVENS The machine is built to comply with the accident prevention, hygiene and electric standards in force. Baking temperature: 300°C Ovens suitable for baking different types of products With the MIX device (optional) it is possible to obtain dual temperatures (about 50°C) between the top decks and the other decks of the oven Versions: 3 / 4 / 5 decks 2 / 3 doors each deck Baking surface: 9 to 19 m² Loading with trays, manual or mechanical setters, automatic loading / unloading elevators Stainless steel external panels, front and hood Bottom baking surface is made up by concrete

2. Technical Specifications Above diagram is showing the working height of the decks on the left and the deck loading heights on the right (*) with the MIX device, working height of the deck below is 17cm. Note: Room height can be 250 to 270 – 340cm depending on the configuration of the oven. Standard power: 400 V, 3 phase, 50Hz Heating: light oil, gas (methane or LPG) Minimum ceiling height: 270cm. Above minimum heights refer to standard equipment. (*) Working heights: from bottom deck upwards Loading system: Provide 60cm for the operator in front of the oven in addition to the setter length Loading ends heights (above the floor): 3-deck models: 91 – 120 – 149cm 4-deck models: 77 – 106 – 135 – 164cm 5-deck models: 57 – 86 – 115 – 144 – 173cm Thermal power conversion: 1kW = 3,400 BTU/h Fixed deck ovens with combustion gas recirculation, gas or gasoil heated, composed of independent decks with standard working height 19 cm. Ovens particularly suitable to bake a large quantity of different products. Loading with: trays, manual or mechanical setters, automatic elevators. The MIX device allows to obtain dual temperatures either between the two top decks and the bottom deck in the 3-deck models, or between the two top decks and the two bottom decks in the 4-deck models. (maximum difference: -40/50°C in the top deck(s).