1. Self-Sufficient Placements

2. How to Use This CBT The following graphics are designed to help you to navigate through this Computer Based Training. The navigational guides require a single mouse click and may appear in different areas of a slide but, the majority are located on the right side of the screen. Some slides may have additional information that has been timed to appear on the slide. You may want to make sure you have given time for this to occur before proceeding to the next slide. There is a Content slide with hyperlinks to topics covered in this CBT that may be helpful if a review of a specific topic is desired. If you experience any problems viewing or navigating this CBT please contact the DCS Help Desk. Return to the Content Page Proceed to the next slide. Mouse click will also proceed. EXIT Return to the previous slide Exit the CBT.

3. To Print this CBT EXIT If you would like to print this CBT: Return to the DCS web page. Right click on the link to the CBT and choose “Save Target As…” Choose a location on your computer to save the file and click OK. Go to Start, Programs, Microsoft PowerPoint. Choose “Open an Existing Presentation”. Choose the CBT file that you saved above. Choose File, Print from the menu.

4. Overview A new placement type called ‘Self-Sufficient’ has been created to allow case managers to make a new placement for post custody or custody clients who are old enough to live on their own while attending school, working etc… To enter a ‘Self-Sufficient’ placement the client must have an active Post-Custody case or the client must have an active Custody case and be 18 years or older. Use of the ‘Self-Sufficient’ placement should be decided at the Child and Family Team Meeting. EXIT

5. Table of Contents EXIT Placement Icon Adding a Self-Sufficient Placement Add Placement Location Select Placement Type Previous Placement Program Completed Reports Summary

6. Placement Icon The user will double click on the Placements Icon located at the case detail line. EXIT

7. Adding a Self-Sufficient Placement To enter a new placement right click and select ‘Add Placement Location’. EXIT

8. Adding Placement Location The user will select ‘New Placement Location’ and click OK. EXIT

9. The user will select ‘In- Home’ and click OK. EXIT Add Placement Location

10. Select Placement Type EXIT The user will enter the date and select ‘Self-Sufficient’ from the placement type drop down list.

11. Previous Placement Program Completed The system will enter the Service Setting, AFCARS Setting, Location, Address and ID information. The user will Select ‘Yes’ or ‘No’ from the Completed drop down list. The user will then click OK. Please refer to the Discharge Reasons training document. EXIT

12. Adding a Self-Sufficient Placement The placement is added to the client’s record. The user will also notice six additional tabs. These tabs are read only for the case manager. EXIT

13. Reports There are no reports specific to this placement type, although many existing reports will report on this new placement type.

14. Summary EXIT A new placement type called “Self-Sufficient has been created to allow case managers to make a new placement for post custody or custody clients who are old enough to live on their own while attending school, working, etc. To enter a “Self-Sufficient” placement the client must have an active Post-Custody Case or the client must have an active Custody case and be 18 years old or older. Use of the “Self-Sufficient” placement should be decided at the Child and Family Team Meeting.