Presentation is loading. Please wait.

Presentation is loading. Please wait.

NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 FPAA for Analog Circuit Design Presented by Susman.

Published byLaura Charles Modified over 9 years ago

Similar presentations

Presentation on theme: "NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 FPAA for Analog Circuit Design Presented by Susman."— Presentation transcript:

1 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 FPAA for Analog Circuit Design Presented by Susman Das Roll # EC200118205 Under the Guidance of Dr. Ajit Kumar Panda

2 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 Introduction: Field Programmable Analog Arrays (FPAA) have ability to:  Translate complex analog circuits to a simple set of low- level functions giving the analog equivalent of a Field Programmable Gate Arrays (FPGA), providing a basis for the development of dynamically reconfigurable analog/digital hardware.  Place analog functions under real-time software control within the system.  By providing the analog equivalent of logic gates, FPAAs give designers the ability to describe analog functions such as gain stages and filters without reference to op amps, capacitors, resistors.

3 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 FPAA Technology:  A (FPAA), built in CMOS technology, contains:  operational amplifiers  switches  banks of programmable switched capacitors  filters for analog signals  The chip is divided into 20 identical, configurable analog blocks (CABs), each composed of an operational amplifier, five capacitor banks, and switches that can be used to interconnect the cell components and determine their operation.  FPAA technology has four main elements: 1.FPAA Software 2.Configurable Analog Modules (CAM) 3.FPAA silicon 4.Configurable Analog Blocks (CAB)

4 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 Trends from the digital to analog design:  EDA tools and design modules for complete analog design automation – remove the complexity  Pre-built and pre-tested FPAAs – reduce analog implementation from months to minutes  Reconfigurability and real-time updating of the FPAA during operation – allows one piece of silicon to continually adapt to maintain precision and/or perform new functions Advantages of FPAA:  Flexibility  Versatility  Lifetime  Adapting Functionality

5 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 1. FPAA Software: It develops a FPAA synthesis tool, synthesizes behavioral level analog descriptions into its implementations. This synthesis flow, consists of four major phases: I.Function decomposition II.Macro-cell synthesis III.Placement and Routing IV.Post-placement simulation The FPAA synthesis flow:

6 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 l. Function decomposition The high level description of analog functions can be cataloged into two groups as: i.logic description ii.transfer functions The sub-routine of macro-block generation maps the decomposed transfer functions into SC ckts, fit in the structure of (CAB) in the targeted FPAA chip making design space large. ll. Macro-cell synthesis macro-block generation flow:

7 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 2.Configurable Analog Modules (CAM): lll. Placement and Routing Maps the synthesized analog circuit into the FPAA chip reducing the performance degradation caused by the parasitic effects in the interconnection networks using parameters like cost function (C) & signal sensitivity (S). CAMs move the design process from the component level to the functional level. All of these functions are available:  Filter stages  Gain stages  Summing /difference stage  Voltage multiplication all having user-programmable attributes.  Phase /voltage comparators  Rectifiers  Oscillators  References

8 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 3. FPAA Silicon: To avoid the constraint added by the field programmability sufficient number of programmable capacitor arrays (PCAs) are used on a single chip. Design of a linear MOS capacitor structure for switched-capacitor circuits circuits (a) and (b) are equivalent

9 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 Configurable Analog Blocks: The chip is divided into 20 identical, uncommitted, configurable analog blocks (CABs), each with one operational amplifier, five capacitor banks and diverse switches, all established in a 4x5 matrix.

10 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 Switched Capacitor Technology: The switched-capacitor (s/c-) technology of the circuits is the category of sampled-data analog systems used to Determine the correct value of a resistor Reduce required chip area The configuration and parameter selection is done by electronic switches, are of two types: a.Static switches b.Dynamic switches S/C-realization of a resistive branch:

11 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 Applications of FPAA: Integrating analog functionality and saving up to 90% development time. Calibrating or repurposing the FPAA during operation. Integrating the analog I/O around processor- and/or DSP- based systems. The ability of the FPAA to be changed dynamically. anadigm AN10E40 (0212): (One market product)

12 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 FPAA Block diagram:

13 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 Simulation of FPAA:

14 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 Simulation response of FPAA:

15 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 FPAA Product Overview ( AN10E40 ):  Drag and drop circuit design  User parameterizable CAMs/IP Modules pre-package common analog functions.  Single-ended switched capacitor as FPAA base.  Architecture with analog switch fabric  Input/output structure with Single-ended 13 analog I/O cells  Performs Bandwidth DC to 250 kHz & Broadband SNR up to 65 dB  Silicon platform  Static FPAA reconfigurability  Use of EDA tools

16 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 Conclusion: The FPAA technology offers a device with very attractive and universal features, which can be used and exploited in various applications. The FPAA can be very easily and inexpensively utilized in student’s laboratories such as:  The IDT interface provides virtual wiring (drag and drop) and removes the requirement for linking of hardware components,  Students can quickly build complex analog hardware,  Students can see the relationship between analog and digital signal processing, can experience design work, and hardware testing, etc.,  Students are stimulated to perform additional experiments and develop new features of FPAA for practical use. FPAA will find more applications because of its flexibility, low cost and ease of programming.

17 NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 Thank You…

Download ppt "NATIONAL INSTITUTE OF SCIENCE & TECHNOLOGY Presented by: Susman Das Technical Seminar Presentation - 2004 FPAA for Analog Circuit Design Presented by Susman."

Similar presentations

Day - 3 EL-313: Samar Ansari. INTEGRATED CIRCUITS Integrated Circuit Design Methodology EL-313: Samar Ansari Programmable Logic Programmable Array Logic.

Day - 3 EL-313: Samar Ansari. INTEGRATED CIRCUITS Integrated Circuit Design Methodology EL-313: Samar Ansari Programmable Logic Programmable Array Logic.
FPGA (Field Programmable Gate Array)

FPGA (Field Programmable Gate Array)
TOPIC : SYNTHESIS DESIGN FLOW Module 4.3 Verilog Synthesis.

TOPIC : SYNTHESIS DESIGN FLOW Module 4.3 Verilog Synthesis.
A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O Borgatti, M. Lertora, F. Foret, B. Cali, L.

A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O Borgatti, M. Lertora, F. Foret, B. Cali, L.
University Of Vaasa Telecommunications Engineering Automation Seminar Signal Generator By Tibebu Sime 13 th December 2011.

University Of Vaasa Telecommunications Engineering Automation Seminar Signal Generator By Tibebu Sime 13 th December 2011.
EELE 367 – Logic Design Module 2 – Modern Digital Design Flow Agenda 1.History of Digital Design Approach 2.HDLs 3.Design Abstraction 4.Modern Design Steps.

EELE 367 – Logic Design Module 2 – Modern Digital Design Flow Agenda 1.History of Digital Design Approach 2.HDLs 3.Design Abstraction 4.Modern Design Steps.
Tours, 20 June 2002 Field Programmable Analog Arrays: The New Art of Analog Signal Processing CRESITT Industrie Seminar Andreas Kramer.

Tours, 20 June 2002 Field Programmable Analog Arrays: The New Art of Analog Signal Processing CRESITT Industrie Seminar Andreas Kramer.
Electronics’2004, Sozopol, September 23 Design of Mixed Signal Circuits and Systems for Wireless Applications V. LANTSOV, Vladimir State University

Electronics’2004, Sozopol, September 23 Design of Mixed Signal Circuits and Systems for Wireless Applications V. LANTSOV, Vladimir State University
Graduate Computer Architecture I Lecture 15: Intro to Reconfigurable Devices.

Graduate Computer Architecture I Lecture 15: Intro to Reconfigurable Devices.
Capstone Fall 2005 GFX-One Guitar Processor Team Carpal Tunnel September 8, 2005.

Capstone Fall 2005 GFX-One Guitar Processor Team Carpal Tunnel September 8, 2005.
ENGIN112 L38: Programmable Logic December 5, 2003 ENGIN 112 Intro to Electrical and Computer Engineering Lecture 38 Programmable Logic.

ENGIN112 L38: Programmable Logic December 5, 2003 ENGIN 112 Intro to Electrical and Computer Engineering Lecture 38 Programmable Logic.
02/02/20091 Logic devices can be classified into two broad categories Fixed Programmable Programmable Logic Device Introduction Lecture Notes – Lab 2.

02/02/20091 Logic devices can be classified into two broad categories Fixed Programmable Programmable Logic Device Introduction Lecture Notes – Lab 2.
Spring 08, Jan 15 ELEC 7770: Advanced VLSI Design (Agrawal) 1 ELEC 7770 Advanced VLSI Design Spring 2007 Introduction Vishwani D. Agrawal James J. Danaher.

Spring 08, Jan 15 ELEC 7770: Advanced VLSI Design (Agrawal) 1 ELEC 7770 Advanced VLSI Design Spring 2007 Introduction Vishwani D. Agrawal James J. Danaher.
Spring 07, Jan 16 ELEC 7770: Advanced VLSI Design (Agrawal) 1 ELEC 7770 Advanced VLSI Design Spring 2007 Introduction Vishwani D. Agrawal James J. Danaher.

Spring 07, Jan 16 ELEC 7770: Advanced VLSI Design (Agrawal) 1 ELEC 7770 Advanced VLSI Design Spring 2007 Introduction Vishwani D. Agrawal James J. Danaher.
1/31/20081 Logic devices can be classified into two broad categories Fixed Programmable Programmable Logic Device Introduction Lecture Notes – Lab 2.

1/31/20081 Logic devices can be classified into two broad categories Fixed Programmable Programmable Logic Device Introduction Lecture Notes – Lab 2.
LabVIEW Design of Digital Integrated Circuits FPGA IC Implantation.

LabVIEW Design of Digital Integrated Circuits FPGA IC Implantation.
Multiplexers, Decoders, and Programmable Logic Devices

Multiplexers, Decoders, and Programmable Logic Devices
UCB November 8, 2001 Krishna V Palem Proceler Inc. Customization Using Variable Instruction Sets Krishna V Palem CTO Proceler Inc.

UCB November 8, 2001 Krishna V Palem Proceler Inc. Customization Using Variable Instruction Sets Krishna V Palem CTO Proceler Inc.
1 Chapter 7 Design Implementation. 2 Overview 3 Main Steps of an FPGA Design ’ s Implementation Design architecture Defining the structure, interface.

1 Chapter 7 Design Implementation. 2 Overview 3 Main Steps of an FPGA Design ’ s Implementation Design architecture Defining the structure, interface.
CS 151 Digital Systems Design Lecture 38 Programmable Logic.

CS 151 Digital Systems Design Lecture 38 Programmable Logic.

Similar presentations

Ads by Google