1. Work Order System Infor 10 (EAM) Yanfeng 08-30-16
Equipment Entry
Work Order System
Infor 10 (EAM)
Yanfeng
B- Equipment Entry, ( )

2. Equipment Entry STEP 1: GO TO THE “Equipment List” SCREEN
B- Equipment Entry, ( )

3. Equipment Entry STEP 2: SELECT A SIMILAR PIECE OF EQUIPMENT
5. Ensure Record is correct to the standard. Especially the Description.
B- Equipment Entry, ( )

4. Equipment Entry
STEP 3: COPY THE RECORD THAT IS SIMILAR, TO SAVE YOU SOME TYPING
B- Equipment Entry, ( )

5. Equipment Entry
STEP 4: EDIT THE RECORD TO EQUIPMENT ENTRY STANDARDS & SAVE
B- Equipment Entry, ( )

6. Description Standards for Equipment Entry
Most Equipment, Excluding Molds & Assembly Equipment
B- Equipment Entry, ( )

7. Description Standards for Equipment Entry
Molds
B- Equipment Entry, ( )

8. Description Standards for Equipment Entry
Assembly Equipment
B- Equipment Entry, ( )

9. Tool Pack & Flex Bases Correctly Entered Examples
B- Equipment Entry, ( )

10. Special Note on “OUT OF SERVICE” Flag
In version 10 of INFOR the internal code has the following controls:
The Out of Service Flag, means the Equip. No. is still in your plant, but is no longer used. (A Mold waiting ford customer disposition, a spare, etc.)
If a piece of equipment is marked Out Of Service
Do a new Work Request Against it
Do a Work Order Quick Entry Against it
Add it to a PM Schedule
If a piece of equipment is marked Out Of Service, and has an Open Work Order
you can still operate on that Open Work Order (Add Labor, Close, etc.)
If a piece of equipment is marked Out Of Service, and is on a PM Schedule. The PMs will continue to Generate until you add a “Stop PM Date”, or Remove it from the PM Schedule.
then you cannot:
B- Equipment Entry, ( )

11. Transferring or Withdrawing Equipment
A piece of equipment no longer in the plant should not be left as Out of Service.
Mark The Equipment Using the New Screen in the Equipment Menu Below.
Follow Steps 1, 2, and 3 Below
B- Equipment Entry, ( )

12. FIELD ENTRIES (Mandatory Vs Optional)
B- Equipment Entry, ( )

13. EQUIPMENT TYPES
B- Equipment Entry, ( )

14. EQUIPMENT/ASSET ALLOWABLE FIELD ENTRIES
B- Equipment Entry, ( )

15. Equipment Comments Tab: Allows You To Log Comments Against the Equipment
B- Equipment Entry, ( )

16. Equipment Equip. History Tab: Shows Equipment WO History + Some Other Changes
B- Equipment Entry, ( )

17. Equipment Equip. History Tab – Event Type Codes
B- Equipment Entry, ( )

18. Equipment PM Schedules Tab: Shows PM Schedules Equipment is on
**Note: ROUTE-BASED-EQUIPMENT PMs do not show on this view**
B- Equipment Entry, ( )

19. Equipment Costs Tab: Shows Booked Cost on Equipment
Note ROUTE-BASED-EQUIPMENT PMs , do not show
Can EXPORT TO EXCEL,
Use For REPLACEMENT EQUIPMENT JUSTIFICATION, REBUILD JUSTIFICATION, etc.
B- Equipment Entry, ( )