Patrick Thorpe AstralPool UK Ltd European Standards Patrick Thorpe AstralPool UK Ltd

European Standards for Domestic Pools TC402 Domestic Pool Standards. Split into 2 sections: WG1 – Pool Construction & Installation. WG1 is now BS EN 16582– 1/2/3 Part 1 - General Requirement including safety and test methods Part 2 -Specific requirements for in-ground pools Part 3- Specific requirements for above ground pools WG2 – Pool Water Filtration, Circulation & Treatment. WG2 is now BS EN 16713-1/2/3 Part 1 Filtration Systems Part 2 Circulation Systems Part 3 Water Treatment Requirements

European Standards for Domestic Pools WG1 is complete and should come into effect before the end of 2015 as BS EN 16582. WG2 should come into effect 2016 as BS EN 16713. Based on much of SPATA standards.

European Standards for Domestic Pools Changes from SPATA & Commercial Standards: Permissible Openings – applicable only over 500mm depth. - Finger & toe <8mm or >25mm Head & neck <110mm to > 230mm When ranges 25mm to 110mm are used for construction reasons, installer to alert their customer of a potential risk of entrapment (discuss overflow channels) Velocities for Main Drains – now 0.5m/s. A minimum of 2 balanced drains Main drains can be 1m apart (not 2m). Nearest points of the perimeters. Refurbishment with 1 grille - increase size of drain to 1m² fix an anti-entrapment grille with peripheral suction and high dome shall be at least 10% of main dimension any drain where one user cannot cover 50% of opening Double width top tread for pool ladders is recommended.

European Standards for Domestic Pools Changes from SPATA & Commercial Standards: All Swimming pools should be provided with: Warning Signs – “Children must be supervised at all times” “No diving” Instruct client to fix signs within 2,000mm of the pool in a prominent visible position

Revised Acceptable Water Losses Pools should be built water tight Pools should be water tight to one of the classes listed below: This is to be pointed out in point of sale material SPATA will anticipate ‘W0’ or ‘W1’, but a minimum may be ‘W2’ (for outdoor pools only). Discuss how to inform the end user Tightness Class Maximum leakage mm per day or litres / m2 W0 W1 1 W2 2 W3 3

European Standards for Domestic Pools Changes from SPATA & Commercial Standards: Accessibility Secure the means of access or Install a protection device and Keep children under constant supervision Protection devices include: Fencing, Safety Covers, Enclosures, Alarms Note: securing the boundary of the property may be acceptable Pool shell life span will be 10 years (what guarantees)? Partially or fully sunken Above Ground Pools will be treated as In-ground Building tolerances less onerous. Pumps can be connected with flexible joints “Shall” means “must” and “should” means “recommended”.

Keeping up with Legislation SPATA is up to date with ever changing legislation. We are involved in both the creation of legislation / standards and their compliance. We lobby alongside BSI on your behalf against onerous requirements that are impractical. We will continue to keep you informed of developments.

Any Questions?