Cisco Confidential 1 © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Prime Service Catalog 10.0 Demos Mehernosh Vadiwala

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 2 Service Item Status Service Item Operations Billing Accounts Capacity Management Quota Management Agreements Policies

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 3 Provide status as an Out-of-box attribute. Pre-define list of statuses allowed for a Service Item Control which related services can be ordered based on service item status. Automatic ‘takeover’ of existing “Status” attribute. Automatic enforcement of valid status during SI updates Automatic enforcement status transitions during SI updates

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 4 Provide the ability to have “Named” Operations. Ability to specify a resultant “Status” for an operation that will be updated automatically when the Service Item Task is executed. Ability to denote an operation as “Billable”

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 5 High Level Use case: Designer would like to control that when a service is being performed on a service item, no other service that impacts that same service item can be ordered. This use case is also known as “Service Item Locking” Example: When the “Increase Disk size of a VM” service is executing for a “Virtual Machine” no other related services, viz. “Start VM” or “Stop VM”, can be ordered.

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 6 Steps: Enable “Has Status” for Service Item “Virtual Machine” Add custom statuses “Active”, “Being reconfigured”, “Reconfiguration complete”, “Inactive” Add the following state transitions for the above statuses “Active” -> “Being reconfigured” or “Inactive” or “Active” “Being Reconfigured” -> “Reconfiguration complete” “Reconfiguration complete” –> “Active” or “Inactive” “Inactive” -> “Active” Enable order of services only when the status is “Active”

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 7 Enable “Has Status” for Service Item “Virtual Machine” Add custom statuses “Active”, “Being reconfigured”, “Reconfiguration complete”, “Inactive” Add the following “named” operations with their resultant statuses “Save Snapshot” -> “Being reconfigured” “Complete reconfiguration” -> “Reconfiguration complete” “Start” –> “Active” “Stop” -> “Active”

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 8 Use case: Automatic take over of existing status attribute when the “Has status” checkbox is enabled.

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 9 Ability to specify billing rates for a service item based. Multiple Rate tables can be grouped into a Rate Group. Rate table has “Billing attributes” and “Lookup attributes” Rates for SI are defined for different values of “Billing attributes” Separate Rate tables can be defined for different SI Operations. During SI update, billing rate for a SI is automatically arrived at by the application using the rate tables Writes to new table – SiBillingHistory

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 10 What is Account ? Account is the top level object against which “Quotas” are assigned and tracked. Accounts are of 2 types: Tenant Account This account has 1-to-1 relationship with one OU. This OU is usually the top level OU that hierarchical structure of sub-OUs. A Tenant Account is created when quota needs to be tracked for a complete OU hierarchy Project Account This is a grouping of OUs. A Project account is created when quota needs to be tracked collectively for a group of OUs that may or may not have relationship with each other.

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 11 Ability to add custom attributes to the Account definition Specify values for Account specific functional positions Associate a Tenant account to an OU Associate a Project account to multiple OUs.

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 12 Built in infrastructure to track ‘Capacity’ of Service Provider. ‘Capacity’ is defined as the amount of resources that the Service Provider has to fulfill his customer needs. For example. If an entity provides ‘Storage as a Service’ then the total physical capacity in terms of GB will be the capacity of the Service Provider The application can be configured to manage capacity automatically by setting the ‘Managed By’ flag on the corresponding service item attribute to ‘Capacity’

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 13 Built in infrastructure to track customer (account) consumption of resources against an Agreement. For example. Assume a Service Provider provides ‘Storage as a Service’ and a customer enters into an agreement with the service provider to get ‘X’ GB of storage. If Quota Management is turned on, then the application will track resource allocations (Quota) automatically for the customer against the agreement. The application can be configured to manage quota automatically by setting the ‘Managed By’ flag on the corresponding service item attribute to ‘Quota’

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 14 Agreements are created for Accounts and are used to specify to the maximum quotas of Service Items. Agreements are created off Agreement templates to promote lower TCO Only attributes marked as “Quota” managed can be used to create Agreements Sub-agreements can be created off agreements to address real life situations where a customer (tenant) would like to distribute his quota for SI across his sub-OUs

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 15 Example: Create an Offering (Agreement Template) that includes 100 VMs and 1 TB of storage Create an agreement based of this offering for “Cisco” Account. Create sub-Agreements based of the above agreement to distribute the above quotas across the sub-OUs of Cisco.

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 16 The following policy types are supported Capacity Quota Time bound Event based The policy framework built is extensible and new Policy Types can be easily added. Policy Type has one or more Policy templates. Policy Templates are parameterized per-defined conditions. Policy is an instance of a Policy Template with the parameters replaced with actual values If a policy’s condition is satisfied then one or more user defined actions are performed.

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 17 CCP 10.0 contains the following set of OOB Policy templates Capacity Perform action with capacity threshold is reached The policy is applied when "Item Attribute" reaches "Capacity Threshold"% of maximum value. Quota Perform action when quota threshold for attribute is reached The policy is applied for "Account" when "Item Attribute" reaches "Quota Threshold"% of the account quota. Perform action when quota threshold for service item count is reached The policy is applied for "Account" when service item count reaches "Quota Threshold"% of the account quota.

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 18 Time bound Perform action when system date is equal to attribute value The policy is applied when "Item Attribute" is equal to system date Perform action when system date is equal to attribute value +/- duration The policy is applied when "Item Attribute" is equal to system date"( +/- )" "Hours". Event based Perform action when attribute is modified The policy is applied when the value of "Item Attribute" is modified Perform action when attribute is set to a specific value The policy is applied when the value of "Item Attribute" is set to "Value".

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 19 CCP 10.0 contains the following set of OOB Policy actions Stop Submission This action causes prevents the order from being submitted and/or service item from being updated. Send This action sends as per the template selected. Order Service This action causes a pre-defined service request to be submitted. The service form fields can be preset using literal values or “namespaces” Policy Alert This action creates an entry in the policy alert log. The log text is preset and may included “namespace” placeholders

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 20 Capacity Create policy that would trigger an when the “Capacity” of “Storage Area Network” reaches 80% of the maximum capacity Quota Create policy that would trigger an when the count of “Virtual Machine” for an account reaches 70% of the quota Create policy that would trigger order a service when the “Storage” of “Virtual Disk” for an account reaches 75% of the quota Time based Create policy that would trigger an when the “Lease Expiration date” of “Virtual Machine” is within X days of the system date Event based Create policy that would trigger a policy alert when the “Status” of “Virtual Machine” becomes “Offline”