Touch screen function manual Right & left scroll key Room selecting key, Maximal quantity 50. Controlling Target icon Room background image brightness adjustment button Scene selection System setting Intelligent Control Terminal –Touch screen setting

Setting interface Click Setting button

Key in password and confirm, (default Password: )

Setting interface Timer setup System setup Room setting Intelligent Control Terminal –Touch screen setting

Touch screen IP address setting Step 1Step 2 Double click Step 3 Step 4 ① Click IP address ② Bring up the soft keyboard, enter the value you want to modify(Under the computer subnet.) ③ Click OK Restart after quit and power off

Touch screen IP address setting If touch screen software do not run automatically after restart, then please run this command ： “My computer/NandFlash/Touch1/ Touch.exe” to run touch screen software, and select “Auto-start ”mode in system setting. Make the IP address come into effect by click HANG 。

Touch screen programming 1 、 In the menu bar select "touch screen", click the touch screen icon in the drop-down menu Touch Screen

2 、 Select file and open the picture of the new room (the best size of the picture 624*377) Touch Screen

3 、 Select document 4 、 Open Touch Screen

5 、 Right click to the new added room for edit a new room name. 。 Touch Screen

6 、 1). Click to the Icon that you want to add 2). Add the Icon by click to the background image 3). Click black to the icon to cancel adding operation

7 、 Drag the Icon to the place you want. 8 、 You could select Set the attribute of the current object or Set the attribute of all the objects of the current room by right click the icon Touch Screen

9 、 Setting the selected icon remarks, channel, start time and end time. 10 、 Save setting. Touch Screen

11 、 After set up for each Icon, move the cursor to the icon, and you can see all detail settings. 12 、 Click “Scene” button ， and setting scene information Touch Screen

Touch Screen Tip ： The relationship between "the current room scenes information" and touch screen display shown in red frame figure. Tip ： For buttons in the right screen, click to open, then is off, remarks can be set separately 。

14 、 Set each key type, select "Scene on" (only the implementation of target on), " scene off " (only the implementation of target off), the scene on / off (executable target on and off, that is, click to open, then click off). 13 、 Click “Type” button 15 、 Save Touch Screen

17 、 Set "On" remarks and "Off" remarks for each button. Note: You must enter all six buttons "on" and "off" remarks, or it can not be saved. In addition, when the key type is "scene On", there only display the "On" remarks, "Off" remarks can not be displayed. 16 、 Click “Remarks” Button Touch Screen

Add control objective for each key, please note that, target can be in room target (ie add all the icons target of the room background image, the type of target only for the "Channel"), or target outside this room (External, such as dimming modules, switch modules and other equipment that have been programmed (scene or sequence) the target information). Touch Screen

18 、 Add 19 、 Select control target of the room,. 20 、 Click“OK” Adding room target Touch Screen

21 、 Click on "Edit" to set the parameters for each target Tip ： right-click to delete items Touch Screen

22 、 Setting parameters for each channel, such as brightness, running time. 23 、 Save Touch Screen

24 、 Click to add Add target for other room 25 、 Input target number, then add. Touch Screen

25 、 Edit parameters for each target 。

26 、 Setup target parameters ， such as: subnet ID ， equipment ID, type and so on. 27 、 Save Touch Screen

28 、 Quit setting Touch Screen

29 、 Upload to touch screen. Touch Screen

30 、 Select touch screen IP address, you can setup a new one if can not found in the list. Touch Screen

31 、 Click the "Connect / Disconnect", when connection is built, means uploading can be proceeded. 32 、 Select the room to upload Touch Screen 33. Start uploading

34 、 Confirm to finish uploading.