XTERPRISE PROPRIETARY INFORMATION December 15, 2015 TraX TM Cold Chain March 10 th, 2006

XTERPRISE PROPRIETARY INFORMATION December 15, TraX TM Cold Chain Features Battery Assisted Passive (BAP) Tags  Interfaced with a temperature tracking sensor  Relatively small (8 cm x 2.5 cm x 1.5 cm)  Read/write capabilities at up to 30 meters  Long battery life allowing for years of operation Reader / Antenna  Can be a portable handheld or in a fixed location  Downloads the data from the tags Computer / TraX TM Cold Chain Software  Stores tag data on TraX Cold Chain DB for further analysis  Allows data to be sent to others involved in the product’s chain of custody Graphical User Interface  Communicates to personnel indicating exceptions like if the product is acceptable or refused

XTERPRISE PROPRIETARY INFORMATION December 15, Sample Business Cases  Warehousing / Supply Chain / Transportation  Creates a chain of custody to determine where in the cold chain a temperature breach has occurred if at all  With integration, this solution can tell operators in real time, to accept, reject, or accelerate the product through the supply chain (dynamic queuing—not limited to FIFO or Expiration Date)  Disaster Planning and Recovery  Allows companies to understand the temperature changes in products when an anticipated power outage takes place. Executed at retail stores with a handheld and tags in the coolers / freezers.

XTERPRISE PROPRIETARY INFORMATION December 15, Why Implement a Solution? On average, a facility will write-off 5% of all annual perishable purchases due to quality and shelf life issues caused by temperature abuse. Without a solution these products are found after receipt of the product.

XTERPRISE PROPRIETARY INFORMATION December 15, Sample Solution Design BAP tags are inserted at case or pallet level Product loaded and shipped to destination Product arrives at destination and is unloaded Was there a breach? Normal receipt process continues Product is refused, data is sent from TraX to the required parties / systems BAP Tag memory is cleared BAP tags are sent back to origin for reuse NO YES

XTERPRISE PROPRIETARY INFORMATION December 15, Sample Business Case Benefits Accountability / Profitability  Financial obligation for refused product is placed on the correct source in the chain of custody because there is a correlation between the cold chain breach and the time it took place Quality  The shelf life of temperature sensitive products is impacted in a negative manner by variations in temperature.  In understanding the impact temperature has on shelf life, the amount of time that the product was in an unacceptable temperature range must be known (degree minutes).

XTERPRISE PROPRIETARY INFORMATION December 15, Sample Business Case Benefits, cont’d In-stock Position  Cold chain breaches are identified immediately versus when the recipient opens the product and determines that it is unacceptable. That product must be immediately reordered and increases the safety stock levels.  On a wide-scale, this can cause serious inventory issues since inventory planning assumed the product would be available for use. All re-order data is now skewed and the product has to be available for reorder quicker. Food Safety Liability  Microbial activity starts at an exponential rate at temperatures over 40°F  This can activate possibly fatal strands of food borne pathogens such as E.coli, Listeria and Salmonella.  The consequences of infecting a customer with this type of illness are detrimental, not only from a financial sense but a company’s reputation is tarnished.

XTERPRISE PROPRIETARY INFORMATION December 15, TraX TM Cold Chain Version 1.0

XTERPRISE PROPRIETARY INFORMATION December 15, Product Setup of Temp Control Limits

XTERPRISE PROPRIETARY INFORMATION December 15, Web Based Reporting (Secured)

XTERPRISE PROPRIETARY INFORMATION December 15, TraX TM Roadmap to V2.0 (underway)  Extended reporting capabilities:

XTERPRISE PROPRIETARY INFORMATION December 15, Upon selecting Store #1000…

XTERPRISE PROPRIETARY INFORMATION December 15, Additional Features for v.2.0  Addition of a Rules Engine  Cradle-to-Grave Reporting  Temperature / Time Thresholds  Aging / Expiration Reporting Events  Dynamic Queuing Capabilities  Dynamic Shelf Life Calculations  Tagging of fixed assets (coolers, freezers, etc.)

XTERPRISE PROPRIETARY INFORMATION December 15, Thank You