Harding High School Technology Lab Safety Power Machine Review Mr. Pottkotter & Mr. Robinson

Table Saw ON/ OFF BUTTONS MITER GUIDE GROOVE BLADE GUARD FENCE BLADE HIEGHT ADJUSTMENT WHEEL BLADE ANGLE ADJUSTMENT WHEEL TABLE

Table Saw Always use the _________ when ripping a piece of stock. –Fence If the stock _________, hold it down tight and turn the saw off. –Pinches

Table Saw Always ________ until the blade stops moving before removing any stock from any machine. –Wait Use the ________ when crosscutting a piece of stock. –Miter Guide Always use the _______ when ripping a piece of stock. –Fence

Band Saw On/ Off Button Blade Table Blade Guard/ Guide

Scroll Saw On/ Off Table Hold Down Clamp

Ban Saw If the _______________, turn off the machine and tell the instructor. –Blade Breaks Use ___________ when making sharp curve cuts. –Relief Cuts

Ban Saw Always keep a _______ safety margin between your fingers and the blade. –3” Never adjust the _______ when the machine is running. –Guard

Surface Planer Thickness Adjustment Wheel/ Guide Thickness Gauge On/ Off Buttons Cutter Head (Inside) Feed Rollers Infeed Table

Surface Planer This machine cuts the _______ side of the stock. –Top Let the machine reach ____________ before putting the stock in. –Full Speed Keep _______ back so they are not pinched between the stock and the table. –Fingers

Jointer Outfeed TableGuard Infeed Table Fence Infeed Table Adjustment Wheel

Jointer Never _____ when the machine is running. –Leave Never stand directly ________ the stock when using this machine. –Behind You use this machine to smooth and straighten ______ edge of a piece of stock. –One

Jointer Use a _______ when working with a small piece of stock. –Push Stick Never run the stock ______ the grain on this machine. –Against or Across Always keep the stock ______ against the fence. –Tight

Radial Arm Saw Guard Table On/ Off Buttons Yoke Fence

Radial Arm Saw Always return the saw to the ______ of the table after each cut. –Rear Always hold the stock tight against the _____ when using this machine. –Fence Never _____ the saw when the blade is moving. –Leave

Radial Arm Saw Hold onto the saw when ______ to prevent the blade from moving forward. –Starting The blade should extend ______ into the table. –1/8”

Compound Miter Saw Turntable Handle Guard Fence Table Top Side Handle

Compound Miter Saw Always keep all ______________ in place. You should keep your hands and fingers at least how far from the saws path? Guard 4 inches

Compound Miter Saw Let the saw reach full _______________ before you begin cutting your piece. You always want to secure your work piece to the fence or table using _________. Speed Clamps

Drill Press On/ Off Buttons Spindle Adjustment Lever Table Column Chuck Table Lock

Drill Press Always ______ the wood to the table of this machine. –Clamp This machine can be used to ______ or _____ wood. –Drill or Sand

Drill Press Always remove the _______ after tightening or loosening the jaws. –Chuck Key Always keep hair, loose jewelry, and loose clothes away from what part of the machine above. –Chuck