Universal Gland Flameproof System Size Ref (Conduit Size) Part No.Gland BodyGland NutMetric/ NPT Max Dia. Over Cores Max Dia. Over Single Core Max No. Of Cores Overall Length A/FA/CA/FA/CThread 16 – 3/8” HAM*0304U M16M HAA*0304U3/8”½” – ½” HAM*0404U M HAA*0404U½” – ¾” HAM*0505U SS 37.0 M HAA*0505U3/4”¾” – 1” HAM*0606U SS 45.0 M HAA*0606U1” – 1 ¼” HAM*0707U M HAA*0707U1 ¼” – 1 ½” HAM*0808U M HAA*0808U1 ½” – 2” HAM*0909U SS 76.0 M HAA*0909U2” 81.0 Description- Group 1 Flameproof Barrier Gland For use with all conduit types via female threaded entry IP66, -60°C to +130°C Exd I&IIC Exe I&II Extb IIIC Intended Use- Groups I and II Zones 1, 2, 21 and 22 Class I Div I BCD (Rigid Conduit Only) Class II Div I EFG Exde I Mb Exde IIC Gb Extb IIIC Db Material- Manufactured in Brass, Nickel Plated Brass and Stainless Steel 316 HA* - Brass HA*M – Nickel Plated Brass HA*S – Stainless Steel Compatible Conduits- Suitable for all conduits including: Rigid - Metallic - Non Metallic Approvals- ATEX directive 94/9/EC (ATEX 95) to standards IEC :2007 Ed 5, IEC :2007 Ed 6, IEC :2007 Ed 4, IEC :2008 Ed 1 EN :2009 EN :2007 EN :2007 EN :2008 Certifications- ATEX IECEx CSA SIRA09ATEX1231X IECEx SIRA X The Company’s policy is one of continuous improvement and reserves the right to change specifications at any time without prior notice. NON METALLIC (SILICON) PARTS HAVE PASSED THE REQUIREMENTS OF IEC/EN FOR AGE TESTING AND ARE THIRD PARTY APPROVED. 9/5/12 Gland comes complete with two part epoxy putty, gloves and fitting instructions. Putty can be obtained separately if required in 50g and 75g sizes. Part codes EXEP/50 & EXEP/75

Universal Gland Flameproof System Size Ref (Conduit Size) Part No.Gland Body90° ElbowMetric/ NPT Max Dia. Over Cores Max Dia. Over Single Core Max No. Of Cores Overall Length A/FA/CA/FConduit 16 – 3/8” HAM*0304E mm M HAA*0304E½” 20 – ½” HAM*0404E mm M HAA*0404E½” 25 – ¾” HAM*0505E SS 25mm M HAA*0505E¾” 32 – 1” HAM*0606E SS 32mm M HAA*0606E1” 40 – 1 ¼” HAM*0707E mm M HAA*0707E1 ¼” 50 – 1 ½” HAM*0808E mm M HAA*0808E1 ½” 63 – 2” HAM*0909E SS 63mm M HAA*0909E2” Description- Group 1 Flameproof Barrier Gland For use with Liquid Tight Flexible Conduits IP66 -60°C to +130°C Exd I&IIC Exe I&II Extb IIIC Intended Use- Groups I and II Zones 1, 2, 21 and 22 Class I Div I BCD (Rigid Conduit Only) Class II Div I EFG Exde I Mb Exde IIC Gb Extd IIIC Db Material- Manufactured in Brass, Nickel Plated Brass and Stainless Steel 316 HA* - Brass HA*M – Nickel Plated Brass HA*S – Stainless Steel Compatible Conduits- EXLB, EXLT, EXLH, EXLLH, EXLBBT, EXLHC EXSB, EXST, EXSH, EXSLLH, EXSBBT, EXSLHC Approvals- ATEX directive 94/9/EC (ATEX 95) to standards IEC :2007 Ed 5, IEC :2007 Ed 6, IEC :2007 Ed 4, IEC :2008 Ed 1 EN :2009 EN :2007 EN :2007 EN :2008 Certifications- ATEX IECEx CSA SIRA09ATEX1231X IECEx SIRA X The Company’s policy is one of continuous improvement and reserves the right to change specifications at any time without prior notice. NON METALLIC (SILICON) PARTS HAVE PASSED THE REQUIREMENTS OF IEC/EN FOR AGE TESTING AND ARE THIRD PARTY APPROVED. 9/5/12 Gland comes complete with two part epoxy putty, gloves and fitting instructions. Putty can be obtained separately if required in 50g and 75g sizes. Part codes EXEP/50 & EXEP/75

Universal Gland Flameproof System Size Ref (Conduit Size) Part No.Gland BodyGland NutMetric/ NPT Max Dia. Over Cores Max Dia. Over Single Core Max No. Of Cores Overall Length A/FA/CA/FA/C 16 – 3/8” HAM*0304G M HAA*0304G1½” 20 – ½” HAM*0404G M HAA*0404G1½” 25 – ¾” HAM*0505G SS 37.0 M HAA*0505G1¾” 32 – 1” HAM*0606G SS 45.0 M HAA*0606G11” 40 – 1 ¼” HAM*0707G M HAA*0707G11 ¼” 50 – 1 ½” HAM*0808G M HAA*0808G11 ½” 63 – 2” HAM*0909G SS 76.0 M HAA*0909G12” Description- Group 1 Flameproof Barrier Gland For use with Liquid Tight Flexible Conduits IP66, -60°C to +130°C Exd I&IIC Exe I&II Extb IIIC Intended Use- Group I and II Zones 1, 2, 21 & 22 Class I Div II ABCD Class II Div I EFG Exde I Mb Exde IIC Gb Extb IIIC Db Material- Manufactured in Brass, Nickel Plated Brass and Stainless Steel 316 HA* - Brass HA*M – Nickel Plated Brass HA*S – Stainless Steel Compatible Conduits- EXLB, EXLT, EXLH, EXLLH, EXLBBT, EXLHC EXSB, EXST, EXSH, EXSLLH, EXSBBT, EXSLHC Approvals- ATEX directive 94/9/EC (ATEX 95) to standards IEC :2007 Ed 5, IEC :2007 Ed 6, IEC :2007 Ed 4, IEC :2008 Ed 1 EN :2009 EN :2007 EN :2007 EN :2008 Certifications- ATEX IECEx CSA SIRA09ATEX1231X IECEx SIRA X The Company’s policy is one of continuous improvement and reserves the right to change specifications at any time without prior notice. NON METALLIC (SILICON) PARTS HAVE PASSED THE REQUIREMENTS OF IEC/EN FOR AGE TESTING AND ARE THIRD PARTY APPROVED. 9/5/12 Gland comes complete with two part epoxy putty, gloves and fitting instructions. Putty can be obtained separately if required in 50g and 75g sizes. Part codes EXEP/50 & EXEP/75

Universal Gland Flameproof System PART No.BODY A/F ‘A’ THREAD ‘B’ MIN BORE ‘C’ ‘D’‘E’NUT A/F ‘F’ EXPQM M EXPQM M EXPQM M EXPQM M EXPQM M EXPQM M EXPQA ½” NPT EXPQA ½” NPT EXPQA ¾” NPT EXPQA ” NPT EXPQA ¼” NPT EXPQA ½” NPT Description- For use with standard weight braided antistatic conduit EXB, Material- Body and Nut : Nickel plated Brass Seals: Silicone Intended Use- An electrically discharging cable protection system. This system protects electrical cables and wires from mechanical damage and UV radiation Exe Zones 1, 2, 21 & 22. Gas Groups IIA, IIB, IIC Compatible Conduits- EXB Antistatic Polyamide 12 Conduit Approvals- ATEX directive 94/9/EC (ATEX 95) to standards IEC , IEC , EN , EN , IEC IEC EN & EN Certifications- ATEX IECEx BASEEFA ATEX X IECEx BAS X The Company’s policy is one of continuous improvement and reserves the right to change specifications at any time without prior notice. NON METALLIC (SILICON) PARTS HAVE PASSED THE REQUIREMENTS OF IEC/EN FOR AGE TESTING AND ARE THIRD PARTY APPROVED. 9/5/12

Universal Gland Flameproof System PART No.BODY A/F ‘A’ THREAD ‘B’ MIN BORE ‘C’ ‘D’‘E’NUT A/F ‘F’ EXBQM M EXBQM M EXBQM M EXBQM M EXBQM M EXBQM M EXBQA ½” NPT EXBQA ½” NPT EXBQA ¾” NPT EXBQA ” NPT EXBQA ¼” NPT EXBQA ½” NPT Description- For use with standard weight braided antistatic conduit EXBB, this system gives additional wear and EMC Protection Material- Body, Nut and Internal components: Nickel plated Brass Seals: Silicone Intended Use- An electrically discharging cable protection system. This system protects electrical cables and wires from mechanical damage and UV radiation Exe Zones 1, 2, 21 & 22. Gas Groups IIA, IIB, IIC Compatible Conduits- EXBB Stainless Steel Overbraided Antistatic Polyamide 12 Conduit Approvals- ATEX directive 94/9/EC (ATEX 95) to standards IEC , IEC , EN , EN , IEC IEC EN & EN Certifications- ATEX IECEx BASEEFA ATEX X IECEx BAS X The Company’s policy is one of continuous improvement and reserves the right to change specifications at any time without prior notice. NON METALLIC (SILICON) PARTS HAVE PASSED THE REQUIREMENTS OF IEC/EN FOR AGE TESTING AND ARE THIRD PARTY APPROVED. 9/5/12