High Pressure Motor Valve

High Pressure: 1” & 2” Screwed connection rated to 4000 psi standard. Can be rated up to 6000 psi. Motor: One that imparts motion.

High Pressure Motor Valve FIELD REVERSIBLE TOPWORKS OPEN YOKE STUFFING BOX No adjustment No lubrication Teflon – low friction POSITION INDICATOR BALL AND CONE SEAT

High Pressure Motor Valve

Field Reversible Topworks

High Pressure Motor Valve

High Pressure Motor Valves

65 Topworks 65 sq. in. diaphragm P. O. service Extends 1” HPMV with ½” inner valve to 4000# W.P. Extends SMS valve to 4000# W.P. Available for 1”, 2” and non-freeze HPMV Wide spring adjustment range

Manual Valve Positioner Used as a limit for valve stem travel Used to manually open the valve on unit start-up Each revolution of the handle moves the stem 1/16” ¾” max. stem travel

Pneumatic Valve Positioner Maintains stem position through changes in force on stem Provides repeatable stem placement

Soft Seat 15/16” port in 1” valve 1-1/2” port in 2” valve Maximum pressure drop: 300 psi On / Off service only

Improving Service of HPMV’s Size Valve Properly. Valve should operate between 50% and 80% of its capacity Use quick opening trim in erosive service. Use Carbide or Zirconia trim in highly erosive service. Use Equal Percentage trim for controlling pressure or flow rate.

SNAP NOMINAL =%AGE Trim Characteristics

Ceramic Trim Carbide Zirconia

Maximum Pressure Drop 1” Motor Valves 2” Motor Valves I.V. Throttle Relief 1/2” 3/8” ” 3/4”

Piston Balanced High Pressure Motor Valve Full line size port Balanced plug Soft seat with metal to metal backup Field reversible topworks Equal Percentage Trim Bubble tight shut-off Sizes available: 2”, 3,” 4” & 6”

Maximum Working Pressure: Connection W. P. 2” Screwed 4000 psi. 2” Flanged ANSI 1500 (3705 psi*) 3” Flanged ANSI 600 (1480 psi*) 4” Flanged ANSI 600 (1480 psi*) 6” Flanged ANSI 600 (1480 psi*) * For working pressure vs. working temperature of these flanges see ANSI B16.2. Piston Balanced High Pressure Motor Valve

1” Non-Freeze Dump Valve Inner valve located to utilize vessel heat to prevent freezing 1” NPT inlet & outlet 2” NPT vessel mounting Up to 4000 psi W.P. 1/8” –1/2” inner valves available

Non-Freeze Dump Valve Vertical Separator

Horizontal Separator “Stinger” Non-Freeze Dump Valve

Metering Valve Calibrated in 1/64” equivalent orifice diameter Available in 1”& 2” standard HPMV Also available in 2” & 3” piston balanced HPMV

Piston Balanced Metering Valve

Optional Vee Packing Glass filled Teflon Virgin Teflon Carbon filled Teflon Glass filled Teflon Max. Temperature: 500 o F