IEEE MEDIA INDEPENDENT HANDOVER DCN: Title: Cooperation-between- horizontal -handover-and- vertical-handover Date Submitted: February, 17, 2006 Presented at IEEE session #13 in Denver Authors or Source(s): Shu Guiming Abstract: Now we gave a amendment about MIH_Switch.request primitive by adding two parameters indicating handover.

IEEE presentation release statements This document has been prepared to assist the IEEE Working Group. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEEs name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEEs sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE The contributor is familiar with IEEE patent policy, as outlined in Section 6.3 of the IEEE-SA Standards Board Operations Manual and in Understanding Patent Issues During IEEE Standards Development Section 6.3 of the IEEE-SA Standards Board Operations Manualhttp://standards.ieee.org/guides/opman/sect6.html#6.3

Background The scope of the IEEE (Media Independent Handover) standard is to develop a specification that provides link layer intelligence and other related network information to upper layers to optimize handovers between heterogeneous media. In current cellular communication protocol horizontal handover is MS assistant and MSC controled. MS detects radio environment parameters and report these parameters to current BS,when the current BS discover that a horizontal handover is needed then the BS will send a handover request to MS and transfer handover information to MSC in the same time. Finally handover is completed controled by MSC.

Problem The purpose of the P is to provides link layer intelligence and other related network information to upper layers to optimize handovers between heterogeneous media.On the other hand horizontal handover between different BS which belongs to the same media will be executed autonomously by existing cellular radio protocol. Horizontal handover will bring on such events as Link_Going_Down and Link_Down etc. When such events are generated MIH layer will receive and transfer them to upper layer,on receving these events upper layer may take corresponding action which is excrescent for horizontal handover.

Proposal For aforementioned problem we give a such resolve proposal as adding two link events in link event service and two MIH events in MIH event service. Adding link events as Link_Horizontal_Handover_Begin and Link_Horizontal_Handover_End. Adding MIH events as MIH_Horizontal_Handover_Begin and MIH_Horizontal_Handover_End. On receiving these events in the start and the end of the horizontal handover MIH layer or upper layer can let such events as Link_Going_Down and Link_Down etc alone or take horizontal handover related action.

NosLink Event TypeLink Event NameDescription 1State ChangeLink Up L2 connection is established and link is available for use …………………….……………………………. 9Link SynchronousLink Handover CompleteL2 link handover to a ne PoA has been completed 10Horizontal handover statusLink_Horizontal_Handover_BeginHorizontal handover begin 11Horizontal handover statusLink_Horizontal_Handover_EndHorizontal handover end Link Events The following set of link layer events are defined. Table 2Link Events Adding two new link events

NoNo MIH Event Type Link Event Name(L) ocal (R) emote Remote DirectionDescription 1State ChangeMIH Link UpL,RClient ->Network Network ->Network L2 connection is established and link is available for use ……… L,R …… 9Link SynchronousMIH Link Handover CompleteL,RClient -> Network Network -> Network Network -> Client L2 link handover to a ne PoA has been completed 10Horizontal handover status MIH_Horizontal_Handover_Beg in L,RNetwork -> ClientHorizontal handover begin 11Horizontal handover status MIH_Horizontal_Handover_EndL,RNetwork -> ClientHorizontal handover end MIH Events The following set of MIH events are defined. Table 3MIH Events Adding two new MIH events

END