Introducing new life saving eco friendly product the ‘SOLATRON SOLAR AUTO VENT’ You will never enter a scorching car anymore! The SSAV vents out the hot air and any poisonous gas emitted by your car upholstery and plastic accessories and protects your costly installations inside the car like your stereo, GPS, Video etc. Also vents out the dangerous benzene which is (colorless) emitted by air fresheners and tobacco. The SOLATRON SOLAR AUTO VENT is an enhanced mode car ventilator powered by sunlight, ambient lights. Using high quality and powerful solar electrical generator to drive the fan motor. The SSAV vents the hot air out to reduce temperature and humidity of air inside the parked car. So, You will never get into a hot parked car! FEATURES OF SOLATRON SOLAR AUTO VENT Help eliminate scorching heat built-up Vent hot air out enables the cool air in Run on solar power – no battery, no noise, pollution free. Crystalline solar panel provides powerful solar current of more than 700mA which creates enough torque ensuring high venting capability. Easy installation fits all type of windows with sliding window glass of curved or straight top – No drilling, no nailing.. Comes with remote arrays which can be used for tinted, plain or dark glasses. For reference: If outside temperature is 30deg c the internal air of parked car will be heated to about 60 deg c under a hot sun. But if the car is installed with SOLATRON SOLAR AUTO VENT, the internal temperature of the car will be reduced to 39 deg c. as SSAV helps in air circulation. Read More about Benzene and its Effects on Health Cigarette Smoke and Benzene

1.Choose the window to be mounted. Partly open the window and hook OSAV on the window with one end insert into the window frame of the vertical glass edge. 2.Insert the safety belt into the other end of the OSAV to the length of about 2-3 cm. Hook the SSAV and belt assembly onto the glass extend to the whole length of glass top. 3.Cut off the additional length of safety belt and shape it to end profile of the window frame. 4.Fix the safety belt with the aid of the supplied adhesive foam stripes mounted on the top of glass. Slowly close up the window, until the top of SSAV and safety belt both slot into the upper frame of the window. Be sure NOT to leave any gap at both ends. 5.Connect the lead wire from SSAV thru the sun-shield to the lead wire of solar panel with each terminal connector. Leave about 15 – 20 cm of wire before going through the supplied wire tie unit to give room for strain of wire when the door is happen to be opened. Use the supplied wire ties to fit the lead wire on the top frame of the front window.. Hide the excessive wire to the back of sun-shield. 6.Solar panel attached with the anti-slip pad at back side. Put the panel on dashboard.with solar cells side face toward the most sunny direction. When lights falling on the solar panel, the fan will rotate in clockwise direction. Installation is completed.! SOLAR AUTO AIR COOLER MODEL: SAC-3100A INSTALLATION INSTRUCTION