ELCT 301 Dr. Enrico Santi Equipment Testing & Troubleshooting Procedure © Prepared by: Rizwan Muzaffar.

Slides:

Advertisements

Similar presentations

My Projector Doesnt Project!!! …and other problems…

Advertisements

How to use the NEC projector Its easy! Really!. How to use the NEC projector IMPORTANT-make sure you have reserved the equipment (projector and/or laptop).

Velleman Arbitrary Function Generator: Windows 7 by Mr. David Fritz

Samsung PC Studio Manual PC Connectivity Via USB

QUICK GUIDE MANUAL GV-DVR System Organization 2. Specification.

Using the camera and the wireless microphone Howard Goldbaum 9/17/2012.

Introduction to Multisim ECE 1020 Professor Ahmadi.

An Introduction to the Interface

Introduction to the Oscilloscope Professor Ahmadi ECE 002.

March 2004 Labpacks Physics Equipment. March 2004 Labpacks We have two types of power supplies in the lab. They are called ‘Labpacks’ They allow you access.

In this presentation you will:

Introduction to electronics lab ENGRI 1810 Using: Solderless prototype board (white board) Digital multimeter (DMM) Power Supply Signal Generator Oscilloscope.

Artemis Lite Fault Finding FAQ’s

ASENT_FMECA_LAB.PPT FMECA Lab Last revised 08/14/2014.

Measurement Basics II Dr. Len Trombetta 1 ECE 2100 Power supply: current meter and current limit Light Bulb and LED!

*** CONFIDENTIAL *** © Toshiba Corporation 2008 Confidential Wallboards.

Navigation Instructions

Tabor Electronics Ltd. Hands-on Training - ArbConnection By Moti Glazer.

1. Pump down the chamber from the atmosphere pressure 2. Using RHEED to obtain diffraction images 3. Open the RHEED chamber or venting from high vacuum.

1 Lab Equipment. 2 TopicSlides DC Power Supply3-4 Digital Multimeter5-8 Function Generator9-12 Scope – basic controls13-20 Scope – cursors21-24 Scope.

1 Lab #7 – Thevenin/Norton Activity #1 – finding the Thevenin/Norton Equivalent for the function generator –The function generator is a voltage source.

MEASUREMENT DEVICES OUTLINE Multimeters Analog Multimeters

Using the Unity 98 Cordless Response System Directions : Courtesy of IHC public relations.

USE OF THE OSCILLOSCOPE Modified from a presentation written by David Matzke by: Donald Wisniewski, Dawn Wisniewski, Huzefa Mamoola and Angela Nolte Under.

Vex 1.0 © Carnegie Mellon Robotics Academy Inc. MULTIMETER Introduction This PowerPoint is a companion to the videos in “Background / Resources / Multimeter.

Learning about AC signals ES 110. Basic Components  Function generator  LED  Relay  Speaker  Pot  Ohm ’ s Law  Drawing the circuit  Schematic.

George Washington University DC Circuits Lab Professor Ahmadi ECE 002.

1 AC Measurements Using the Oscilloscope and Multimeter by Mr. David Fritz.

Dr. Hoganson CSIS HC11 Demo Program This is our first lab using the 68HC11 microcontroller. We will “talk” to the microcontroller from a PC, run.

LCD Projector Set Up Instructions So, you want to set up the LCD projector, but you’re unsure where to start? Just follow these instructions…

Introduction to the Oscilloscope Professor Ahmadi ECE002 George Washington University.

Institute Of Applied Technology ATE 1012 Grade 10 Eng. Rose Hasan.

Calibration is a comparison between measurements of known magnitude with one device and another measurement made in as similar a way as possible with.

LabVIEW an Introduction

7.2.3 Student Book © 2005 Propane Education & Research CouncilPage Identifying Procedures for Measuring Resistance Between Two Given Points in.

ECE 1020 FINAL PRESENTATION TA: Allen Guan and Sibel Ahmed Shehzad Mufti.

Electronic Devices Laboratory CE/EE 3110 Introduction to LabView.

TA: Chris Reilly Group 5: Benjamin, Ramie, Zachary, Dinal.

TDS 210 BASIC INSTRUCTIONS. Measure 1. Push the MEASURE button to access the automated measurement. 2. capabilities. There are five measurements available.

PROEDIT WRITING A PROCEDURE USING THE BUILT-IN PROCEDURE WIZARD.

The Mavica for the Maverick: A How-to Guide Operating instructions for the Sony Mavica CD350 Digital Camera An Easy-to-Follow Guide to Everything You Need.

Meter Accuracy DC Volts ±(0.1% of the reading + 1 digit) DC Amps

George Washington University DC Circuits Lab Professor Ahmadi ECE 002.

Using a Multimeter McTigue Junior High Technology Ed. Click Here

Speech Room AV Capture Station Speech Room AV Capture Station Revision Date: November 2014.

Measuring Phase Difference Dr. Len Trombetta 1 ECE 2100.

Analog Discovery Arbitrary Function Generator for Windows 7 by Mr

WebCCTV 1 Contents Introduction Getting Started Connecting the WebCCTV NVR to a local network Connecting the WebCCTV NVR to the Internet Restoring the.

Synchronizing and setting the clock on the Viking timepiece wall oven 12:15.

Unit 5 Learning Objective(s) L5.1a To understand the need for safe working practices when carrying out practical electronics L5.1b To understand relevant.

Introduction to the Oscilloscope Professor Ahmadi ECE 002.

Lab instruments ELCT 201 Digital Multimeter Voltage Tester

Generator Frequency Knob Frequency display Frequency Range Output Amplitude (output Level) Knob -20 db (output attenuate) Functions.

Velleman Oscilloscope: Windows 7 by Mr. David Fritz.

Our Class Camera! BodyLens LCD Screen Viewfinder Built-in microphone Record Button Zoom Settings menu Power Source Ports/Jacks Hard Disk Drive.

Electronic workshop Dr. Imtiaz Hussain URL :

The Basics Electronics. To familiarise yourself with electronics To have an understanding of how and why we test electronic circuits. To complete a test.

Configuring a New Program in PLC’s Window 7. Step 1 Click on the Blank Paper icon to begin a new program.

Hardware Configuration Guide Configuring Dongles and Creating Barcodes for Devices Used with VSC.

Measurement Basics II Dr. Dave Shattuck 1 ECE 2100 Power supply: current meter and current limit Light Bulb and LED!

It’s always important that all of your nodes be numbered. So the way to do that is to go to Options at the top of the screen then select Preferences. When.

Using electrical Test Equipment To accompany the Georgia Agriculture Curriculum Course: AG-AG-AMII Using Electrical Test Equipment 2010 VGP.

STEP-1 START PROTEUS Click on START button and you will get “ Proteus 7 professional “  Install Lab Center Proteus in the PC.  After Successful installation.

DMR Tuner Training Document.

Introduction to the Oscilloscope

Not able to Find Videos on TV Screen with Roku Streaming Player. Here's guide for you.

2) Connect the VGA cable from the monitor output of the laptop [D] to the computer input of the projector [E]. [D] [E]

McCrometer Nano Board Test Procedure

Click “Execute” button.

Downloading to the NXT requires the correct hardware setup

Presentation transcript:

ELCT 301 Dr. Enrico Santi Equipment Testing & Troubleshooting Procedure © Prepared by: Rizwan Muzaffar

TYPES OF EQUIPMENT: OSCILLOSCOPE FUNCTION GENERATOR MULTIMETER POWER SUPPLY OPEN CHOICE SOFTWARE

OSCILLOSCOPE Step 2: Press AUTOSET Step 1: Connect the probe as shown for “PROBE COMPENSATION”. Make sure that you observe 10X at the display as well as on the Probe. Note: We are supposed to get a 1kHz, 5V pk-pk Rectangular Wave as shown above

FUNCTION GENERATOR Step 1: Turn all the knobs to the Minimum. We can do so by turning them counter-clockwise Step 2: Make sure NONE of the buttons are pressed in. Step 3: Select 1kHz and Sine Wave buttons Step 4: Connect the Cable tightly, as shown in the Main Out Port

FUNCTION GENERATOR (contd..) Connect the cable to CH1 of Oscilloscope and to the Main Out of the Function Generator. Generate a 1kHz Sine Wave as shown above.

MULTIMETER Step 1: Connect The cables as shown and turn The dial to the beep icon as shown above Step 3: Connect the cables as shown below. We are Suppose to hear a buzz sound, both at 2A and 10A ports. Step 2: Select V (DC) & Make sure to select either 2, 20 or 200 Range Checking that the built-in fuse for current measurement is OK

POWER SUPPLY Step 1: Make sure to turn the “A/B OUTPUTS” switch right to the INDEPENDENT mark. Step 2: Turn the switch to either A or B and then make sure to use the Same output ports

POWER SUPPLY: (contd..) Step 3: Rotate the “VOLTAGE” knob and check that the terminal voltage matches the voltage indicated by the meter on the instrument. Check that the voltage increases/decreases with the clockwise/counterclockwise Rotation of the knob respectively Step 4: Short the ports at A as shown and rotate the CURRENT knob above and Observe the change in current. Make sure LED is turned ON. Note: Repeat the above procedure for B output too.

OPEN CHOICE SOFTWARE Step 1: Click “Select Instrument” icon Note: Before instrument selection there will be a blank space underneath “Select Instrument” Step 2: Select the GPIB Device and hit identify and then OK

OPEN CHOICE SOFTWARE (contd..) Step 3: Observe that now “TDS 220” is visible underneath Select Instrument icon. Repeat the previous step if you do not see TDS220 Step 4: Click “Get Screen” icon and wait until the Progress window completes the operation

OPEN CHOICE SOFTWARE (contd..) Output of the Oscilloscope should appear at this screen. After this you can click Save As to save your work on a portable device or on the Z: drive Note: If you do not see Oscilloscope’s output and the Progress Window takes a long Time to process, then reboot the oscilloscope, close the software and start from Step 1.

Still if you have any Questions or concerns that are not mentioned above, kindly Let Us Know. We are Here for Your HELP. Good Luck!!! & Enjoy