WARM UP Have book on desk & ready for book check

Slides:



Advertisements
Similar presentations
Chapter: Work and Simple Machines
Advertisements

Simple Machines and Mechanical Advantage
Chapter: Work and Simple Machines Table of Contents Section 3: Simple MachinesSimple Machines Section 1: Work and Power Section 2: Using MachinesUsing.
Work, Power, and Machines
Simple Machines Physical Science Mrs. Black Spring 2010.
Chapter 14: Machines.
Chapter 14 Work & Simple Machines 4/12/2017 2:57 PM
Simple Machines.
Types of Simple Machines
Work and Machines What Is Work? How Machines Do Work Simple Machines Table of Contents.
Simple Machines Outline Notes
Work and Machines.
Chapter 12 Work and Machines
Simple Machines The six types of simple machines are:
Work and Machines Chapter 5 Sections 1-3.
How Tools Work. The Six Simple Machines  Lever  Inclined Plane  Wedge  Screw  Pulley  Wheel and Axle.
Chapter 14 Section 3.
Work and Machines Chapter 5 Sec 2. What is a Machine?  Any device that makes work easier.
Chapter 5 Work & Machines
Work, Power, Simple machines
Work and Machines Chapter 14
Chapter Three : work and simple machines
Simple Machines (Part 1)
6.3 – Simple Machines Guided notes.
SIMPLE MACHINES. Slide 1  The Six Simple Machines are: 1. Lever 2. Wheel and Axle 3. Inclined Plane 4. Wedge 5. Pulley 6. Screw.
Work, Power, and Simple Machines
Ch. 6 Work and Machines.
Copyright © by Holt, Rinehart and Winston. All rights reserved. ResourcesChapter menu Section 1 Work and Power What Is Work? Work is the transfer of energy.
Chapter 8 Work and Machines.
Work  The product of the force and distance when a force is used to move an object.
Machine- a device that makes work easier by changing the direction or size of the force.
Simple Machines Spring 2014.
Work and Machines. What is Work? Work is force times distance. To be exact, work is force times the distance moved in the direction of the force. The.
Work and Simple Machines. Work is the use of force to move an object some distance. Work is done only when an object that is being pushed or pulled actually.
Chapter 12 Work and Machines
Physical Science Chapter 5 Work and Machines 1 Note to self: Find videos.
6.3 – Simple Machines.
Work, Power, and Machines Glencoe Chapter 5. A. Work is the transfer of energy that occurs when a force makes an object move. 1. For work to occur, an.
SIMPLE MACHINES Chapter 5 Notes.
CH 14.1 Work and Power. TrueFalseStatementTrueFalse Work is the product of force, distance and time Power is the amount of work done in a certain time.
Work and Simple Machines Chapter 3 Physical Science.
Review of Chapter 4 Book “M”. Section 1 What is work? Work is done on an object when the object moves in the same direction in which the force is exerted.
Physics: Machines Mr. Fox’s 8 th Grade Science (I’ve got nothing witty for here.)
What is Work?  Work: A force must be exerted on an object and the object must move in the direction of the force  No movement means no work  Movement.
Warm Up: 1/14/13  Give an example of a machine you use on a daily basis. Then say how you thinks it helps to make work easier.
Test 6: Chapter 5 Work & Machines Honors Physical Science.
Simple Machines Chapter 5 Section 3.
Work and Machines Chapter 5. What machines do you use in your life to help you do some type of work?
Physical Chapter Seven Simple Machines Levers Pulleys Inclined Planes Screws Wheel & Axle Wedge Compound Machines.
Simple Machines W O R K M e c h a n i c a l A d v a n t a g e Force Effort E f f i c i e n c y 1.
Simple Machines. Before we begin, let’s review what work is… What is work? In which of the following situations is work being done? 1) Mr. Wood gives.
Work and Machines What Is Work? How Machines Do Work Simple Machines - REVIEW Table of Contents.
Work and Simple Machines Mandy Ennis Meeks Baldwin Arts and Academics Magnet School.
Chapter 8 Guided Reading. _____________ occurs when a force causes an object to move in the direction of the force. Work is done on an object only when.
Chapter 7 Review.
Simple Machines, Mechanical Advantage, and Work. Machines  Machines make work easier by changing direction of a force, multiplying a force, or increasing.
Types of Machines Levers Simple machine that has a bar that pivots at a fixed point This fixed point is called the fulcrum The load Input force 3 Types.
Simple Machines There are 6 basic types. 1 - INCLINED PLANE An inclined plane is a flat, sloped surface How it works: *It increases distance and decreases.
Chapter Sections: Section 1- What is Work? Section 1- What is Work? Section 2- Mechanical advantage and Efficiency Section 2- Mechanical advantage and.
Unit 2 Lesson 3 Machines Copyright © Houghton Mifflin Harcourt Publishing Company.
Work and Machines.
Unit 2 Lesson 3 Machines Copyright © Houghton Mifflin Harcourt Publishing Company.
Chapter: Work and Simple Machines
Simple Machines.
Work and Simple Machines
Simple Machines Week 8 Notes
Simple Machines Chapter 12 Section 3.
Bell Question 1/23/12 What force makes machines less efficient?
Chapter 5, Section 3 Notes Simple Machines.
Unit 2 Lesson 3 Machines Copyright © Houghton Mifflin Harcourt Publishing Company.
Presentation transcript:

WARM UP Have book on desk & ready for book check Have homework page 165 ready for checking Silently read textbook starting on page 216 while I complete book check.

SIMPLE MACHINES... ROCK!

88888___88888888888888888___88888 8888_____888888888888888_____8888 8888_____888888888888888_____8888 8888_____888888888888888_____8888 8888_____888888888888888_____8888 8888_____888888888888888_____8888 8888_____888888888888888_____8888 8888_____88____888____88_____8888 8888_____8______8______8_____8888 8888_____8______8______8_____8888 8888_____8______8______8_____8888 8888_____8______8______8_____8888 8888_____8____8888888888888888888 8888_____8___88_____________88888 8888_____8__88_______________8888 8888______888_________________888 8888________88_________________88 8888__________88_______________88 8888____________88_____________88 8888_____________88___________888 8888______________8___________888 8888_______________8__________888 8888_______________8_________8888 88888_______________________88888 888888_____________________888888 888888888888888888888888888888888

WHAT IS WORK? In science you do work on an object when you exert a force on the object that causes the object to move some distance In order for you to do work the object must move some distance as a result of the force.

In order for you to do work on an object, the force you exert must be in the same direction as the object’s motion NO WORK!

CALCULATING WORK Remember- The amount of work done on an object is found by multiplying force times distance W=F x D Example- To help rearrange the desks in Mr. Speer’s room you exert a force of 20N to push a desk 10m. How much work do you do?

SOLUTION Work = force x distance Work = 20N x 10m Work =200Nm 200 Nm is the same as 200 Joules!

WHAT IS A MACHINE? A machine is a device that allows you to do work in a way that is easier or more effective. NOT always complex. NOT always run by electricity Does NOT decrease the amount of work that is done.

A machine makes work easier by: changing the amount of force you exert changing the distance over which you exert the force Changing the direction in which you exert the force

What do machines do? changes size changes direction changes both fulcrum Input force Output

When you use a machine to do work, there is always an exchange, or tradeoff, between the force you use and the distance over which you apply that force. You can use less force over a greater distance or a greater force over a shorter distance to do the same amount of work.

Mechanical Advantage The force that you apply on a machine is the input force. The work you do on the machine is equal to the input force times the distance over which your force moves the machine. The work that you do on the machine is the input work.

Mechanical Advantage The force that the machine applies is the output force. The work that the machine does is the output work. When you use a machine, the output work can never be greater than the input work.

Mechanical Advantage What is the advantage of using a machine? A machine makes work easier by changing the amount of force you need to exert, the distance over which the force is exerted, or the direction in which you exert your force.

Mechanical Advantage Even though machines make work easier, they don’t decrease the amount of work you need to do. Instead, a machine changes the way in which you do work.

MECHANICAL ADVANTAGE (M.A.) & EFFICIENCY A machine’s Mechanical Advantage (M.A.) is the number of times a force exerted on a machine is multiplied by the machine.

Multiplying Distance In some machines the output force is less than the input force. Why would you want to use a machine like this? THINK:

Changing Distance Some machines allow you to exert your force over a shorter distance. In these machines, the output force is less than the input force.

Changing Distance The mechanical advantage of this type of machine is less than one because the output force is less than the input force.

Changing Direction Some machine don’t multiply either force or distance. What could be the advantage of these machines?

Changing Direction Sometimes it is easier to apply a force in a certain direction. For example, it is easier to pull down on a rope than to pull up on it. Some machines enable you to change the direction of the input force.

Changing Direction In these machines neither the force nor the distance is changed. The mechanical advantage of this type of machine is equal to one because the output force is equal to the input force.

Multiplying Force In some machines, the output force is greater than the input force. THINK: How can you exert a smaller force than is necessary for a job if the amount of work is the same? Remember: Work =fxd Think about a ramp…

Changing Force Some machines make doing work easier by reducing the force you have to apply to do work. This type of machine increases the input force, so that the output force is greater than the input force.

Changing Force The number of times a machine increases the input force is the mechanical advantage of the machine.

Changing Force The mechanical advantage of a machine is the ratio of the output force to the input force and can be calculated from this equation:

Calculating Efficiency So far we have pretended that the work you put into a machine (input) is exactly equal to the work done by the machine (output). In reality, output is always less than input. Why? Much of our input work is lost to friction Efficiency is a comparison of the output work to the input work.

EFFICIENCY = OUTPUT/INPUT x 100% Example- You cut the lawn with a hand lawn mower. You do 250,000 J of work to move the mower. If the work done by the mower in cutting the lawn is 200,000J, what is the efficiency of the lawn mower?

SOLUTION E=O/I x 100% 200,000/250,000 x 100% .8 x 100% = 80%

ACTUAL vs. IDEAL M.A. The M.A. a machine provides in a real situation is called the Actual M.A. It can only be determine by measuring the true output & the true input.

THE SIMPLE SIX So just what ARE the simple machines? WEDGE (really just a special inclined plane) SCREW (really just an inclined plane wrapped around a stick) INCLINED PLANE (think “ramp”) LEVER WHEEL & AXEL PULLEY (really just a wheel with a groove)

An inclined plane that moves is called a wedge. A wedge can have one or two sloping sides. An axe and certain types of doorstops are wedges. Just as for an inclined plane, the mechanical advantage of a wedge increases as it becomes longer and thinner.

A screw is an inclined plane wrapped around a cylinder or post. The inclined plane on a screw forms the screw threads. Just like a wedge changes the direction of the effort force applied to it, a screw also changes the direction of the applied force.

When you turn a screw, the force applied is changed by the threads to a force that pulls the screw into the material. The mechanical advantage of the screw is the length of the inclined plane wrapped around the screw divided by the length of the screw.

A lever is any rigid rod or plank that pivots, or rotates, about a point. The point about which the lever pivots is called a fulcrum.

The mechanical advantage of a lever is found by dividing the distance from the fulcrum to the input force by the distance from the fulcrum to the output force.

Inclined Plane An inclined plane is a flat, sloped surface. Less force is needed to move an object from one height to another using an inclined plane than is needed to lift the object. As the inclined plane becomes longer, the force needed to move the object becomes smaller.

Using Inclined Planes Imagine having to lift a box weighing 1,500 N to the back of a truck that is 1 m off the ground. You would have to exert a force of 1,500 N, the weight of the box, over a distance of 1 m, which equals 1,500 J of work.

Using Inclined Planes Now suppose that instead you use a 5-m-long ramp. The amount of work you need to do does not change.

Using Inclined Planes You still need to do 1,500 J of work. However, the distance over which you exert your force becomes 5 m.

Using Inclined Planes If you do 1,500 J of work by exerting a force over 5 m, the force is only 300 N. Because you exert the input force over a distance that is five times as long, you can exert a force that is five times less.

Using Inclined Planes The mechanical advantage of an inclined plane is the length of the inclined plane divided by its height. In this example, the ramp has a mechanical advantage of 5.

In a first-class lever, the fulcrum is between the input force and the output force. First-class levers multiply force or distance depending on where the fulcrum is placed.

In a second-class lever, the output force is between the input force and the fulcrum. Second-class levers always multiply the input force but don’t change its direction.

In a third-class lever, the input force is between the output force and the fulcrum. For a third-class lever, the output force is less than the input force, but is in the same direction.

A wheel and axle consists of two circular objects of different sizes that are attached in such a way that they rotate together. As you can see, the larger object is the wheel and the smaller object is the axle.

Wheel and Axle The mechanical advantage of a wheel and axle is usually greater than one. It is found by dividing the radius of the wheel by the radius of the axle.

Using Wheels and Axles In some devices, the input force is used to turn the wheel and the output force is exerted by the axle. Because the wheel is larger than the axle, the mechanical advantage is greater than one. So the output force is greater than the input force.

Using Wheels and Axles In other devices, the input force is applied to turn the axle and the output force is exerted by the wheel. Then the mechanical advantage is less than one and the output force is less than the input force. A fan and a ferris wheel are examples of this type of wheel and axle.

Pulley To raise a sail, a sailor pulls down on a rope. The rope uses a simple machine called a pulley to change the direction of the force needed. A pulley consists of a grooved wheel with a rope or cable wrapped over it.

Fixed Pulleys Some pulleys are attached to a structure above your head. When you pull down on the rope, you pull something up.

Fixed Pulleys This type of pulley, called a fixed pulley, does not change the force you exert or the distance over which you exert it. Instead, it changes the direction in which you exert your force. The mechanical advantage of a fixed pulley is 1.

Movable Pulleys Another way to use a pulley is to attach it to the object you are lifting. This type of pulley, called a movable pulley, allows you to exert a smaller force to lift the object. The mechanical advantage of a movable pulley is always 2.

Movable Pulleys More often you will see combinations of fixed and movable pulleys. Such a combination is called a pulley system. The mechanical advantage of a pulley system is equal to the number of sections of rope pulling up on the object.

COMPOUND MACHINES Gears Wheel & Axel Screws A machine that utilizes two or more simple machines. Consider a Pencil Sharpener… Gears Wheel & Axel Screws

lever wheel and axle wheel and axle