Scene Shop and Electricity Safety MVHS Theatre Production Spring 2008

Why? Why? Why? It is essential for theatre students and participants to learn the proper safety procedures in order to prevent injury to one’s self and to others.

Scene Shop Rules Keep the shop clean and safe! At the end of each work session, make sure to replace all tools used, the floor is swept/vacuumed/mopped, and all exits are free from obstructions. No one will be allowed to leave the class until everything is cleaned up!

Scene Shop Rules Get help when lifting heavy objects. Lift objects by bending your knees, not your back.

Scene Shop Rules Never climb a ladder unless someone on the ground is holding it steady. Never stand on the top step of a ladder, no matter how secure it seems!

Scene Shop Rules Stay aware of work going on around, above, and underneath you.

Scene Shop Rules Wear safety goggles to protect your eyes from splinters and dust.

Scene Shop Rules Wear closed-toed shoes whenever working in the shop. Steel-toed shoes are even better! Never wear open-toed shoes like flip-flops while working.

Scene Shop Rules Make sure electrical cords are clear of saw blades, water, and/or damp objects.

Scene Shop Rules Never wear baggy clothes, jewelry, ties, or scarves while operating a power tool; they get caught!

Scene Shop Rules Make sure that the power saws are equipped with blade guards. Never remove a blade guard from a stationary saw.

Scene Shop Rules Make sure your blade is sharp, so wood does not bind, or catch, in the saw. Avoid twisting or forcing wood against the saw blade.

Scene Shop Rules Keep your hands away from the blades of power saws. Use a push stick to feed small pieces.

Scene Shop Rules Unplug any power tool before changing any blade or bit or when not in use.

Scene Shop Rules Never touch Krazy Glue or Super Glue. It can bond skin to skin or to other materials.

Scene Shop Rules Paint in well ventilated areas. Oil, alcohol, and lacquer-based paints, stains, and finishes are extremely flammable. Work away from any open flame.

Scene Shop Rules Always wash out brushes and other painting tools. This includes sponges and rags. Hang them to dry away from direct heat.

Electricity Safety Wear rubber-soled shoes when working around electricity.

Electricity Rules Don’t touch bare wires, even if you are sure they are disconnected. Know where the master switch and circuit breakers are located.

Electricity Rules Disconnect electrical tools and equipment from electrical circuits before working with them.

Electricity Rules Unplug lights before changing bulbs; a socket contains live wires.

Electricity Rules Don’t work in damp locations or put a drink where it could spill. Most liquids are conductors.

Electricity Rules Always disconnect electrical devices by pulling the PLUG, not the cord. Keep cords, cables, and connectors clean and free of debris.

Electrical Rules Immediately notify your technical director if any cords/cables are cracked, worn, or frayed.

Electrical Rules Coil cables by plugging the connectors together or tying them with rope/twine when finished with work.

Electrical Rules If electrical shock occurs, turn of the power and notify your technical director immediately.

Electrical Rules Do not overload the electrical circuit when using a twofer or other multiple connector.

MOST IMPORTANTLY If you are not sure of what you are doing, STOP! Ask your technical director for help or advice.