French-German Institute for Environmental Research, University of Karlsruhe 1 Particulate Matter Emissions from Industrial Sources (With the Iron & Steel.

Slides:

Advertisements

Similar presentations

A Software Tool for Estimating Mercury Emissions and Reductions from Coal-Fired Electric Utilities (EU) Presented at the NC Clean Smokestacks Act Sections.

Advertisements

1 Iron and Steel Sector Overview Prepared for the CEC North American Strategy for Catalyzing Cooperation on Dioxins, Furans and HCB Source Control Workshop.

Extracting iron from its ore Chemical reduction with carbon

March 21, 2012 An Advanced Manufacturer in Steel California Steel Industries, Inc. Fontana, CA.

Interpretation of indicators in industry Bruno Lapillonne, Vice President, Enerdata Reunión Técnica de Trabajo del Proyecto BIEE 24 – 26 de febrero, 2014,

Implementation of best available techniques (BAT) under the new

U.S. Environmental Protection Agency April 13, 2011 Final Rules to Reduce Air Toxics from Boilers.

The costs of reducing PM 10 emissions and concentrations in the UK A project carried out by AEA Technology for the UK Department of the Environment, Transport.

Marion Wichmann-Fiebig II 5 Abteilungsleiterin „Luft“ 1 Review of the Gothenburg Protocol Link to potential PM control under CLRTAP: – Specifies control.

CLRTP PMEG Third meeting, 13 & 14 March 2006, Dessau.

Summary of relevant information in the CAFE Position paper on PM Martin Meadows UNECE PMEG Berlin, 23 & 24 May 2005.

Workshop to Promote the Ratification of the UN-ECE CLRTAP HM Protocol May 2008, Yerevan, Armenia. 1 Additional technical measures, their reduction.

Workshop to Promote the Ratification of the UN-ECE CLRTAP HM Protocol May 2008, Yerevan, Armenia. 1 emissions reduction (and costs) The effectiveness.

Consultant: CMDC Joint Venture Application of BAT in IPPC/EIA Experience in EU Member States Per Ponsaing COWI.

Metals. There are two groups of Metals 1.Ferrous – consist mainly of IRON 2.Non Ferrous – contain NO IRON.

Development of the co-operation within the convention on long-range transboundary air pollution– St Petersburg April 2012 CITEPA – 7, Cité Paradis.

Practical use of newly developed BAT conclusions Valts Vilnītis.

UBA Federal Environment Agency Austria DFIU French-German Institute for Environmental Research University of Karlsruhe Assessment of the Air Emissions.

Wednesday, 12/12/2007, FYROM Prevention of Contamination from Mining & Metallurgical Industries in FYROM Strategic Plan for Prevention of Contamination.

37th meeting of the Task Force on Integrated Assessment Modeling February 2010, UNECE, Geneva Towards widening the application of integrated assessment.

The potential for further reductions of PM emissions in Europe M. Amann, J. Cofala, Z. Klimont International Institute for Applied Systems Analysis (IIASA)

Monday, 10/12/2007, SERBIA Prevention of Contamination from Mining & Metallurgical Industries in Serbia Strategic Plan for Prevention of Contamination.

Development of an Operational Plan for Environmental Protection from Industrial Dusts in Russia and other NIS Contract Number: INCO-CT Starting.

Operational Plan for the Environmental Protection from Metallurgical Dusts in Ukraine ENPRODUS Project ( INCO – CT – ) Presentation by Prof.

37th meeting of the Task Force on Integrated Assessment Modeling February 2010, UNECE, Geneva Towards widening the application of integrated assessment.

Application of air quality strategies of Western Europe for modeling of the transboundary air pollution impact on the Russian Federation with the GAINS.

Mr. Jiří Spitz ENVIROS, s. r. o., Prague, Czech Republic Phone: Fax: United.

Possible Options for Improving Heavy Metal Emissions Reductions & Technical and Non-technical Reduction Measures for Particulate Matter Katja Kraus, Federal.

Presentation Impact of Vietnam industrial production on climate change Full name: Ngo Duc Lam Academic title: Doctor, Chairman of Chemical and Industrial.

Workshop, 12/3/2004 Banska Bystrica – SLOVAC REPUBLIC “INTEGRATED LICENCE PROCEDURE (Greek case)” Katerina Iakovidou-Anastasiadou Hellenic Ministry for.

PM emissions from mobile Sources a vehicle producer‘s perspective Giovanni Margaria, ACEA presented by Dr. Michael Mrowietz, VW Workshop of the UN/ECE.

The POP protocol in practice ……………………… André Peeters Weem Sankt Petersburg October 2009.

FRENCH PM WORK IN PROGRESS With the contribution of: Sonia Babu, Jean-Pierre Chang, Carole Levy, Bénédicte Oudart, Emanuel Rivière Jean-Pierre Fontelle.

The impacts of the UN/ECE protocols on PM emissions in Europe Preliminary results of a study conducted for the PMEG Meeting, Dessau, March 10, 2006 with.

IIASA Sources of PM Emissions in Europe. IIASA RAINS Emission and cost calculation scheme Activity data Vintages Other Emission factor Control strategies,

IPPC Directive state of play and future developements

Mitigation of primary PM emissions Overview of existing technical and non- technical emissions mitigation techniques M. Amann, J. Cofala, Z. Klimont International.

IIASA International Institute for Applied Systems Analysis (IIASA) An Integrated Assessment Model for Fine Particulate Matter in Europe Markus Amann, M.

1 EGTEI – 22 November 2011 Nadine ALLEMAND – EGTEI secretariat Update of the Guidance Document of the Gothenburg Protocol with information on Black Carbon.

Renewable & Nonrenewable Resources Lesson 2.4: “Solid Waste Management”

PBTs in the Northeast & P2 Opportunities for Lead Karen Thomas NEWMOA.

1 EMISSION INVENTORY OF BANGLADESH under Malé Declaration on Control and Prevention of Air Pollution And Its Likely Transboundary Effects for South Asia.

1 Review of the Integrated Pollution Prevention and Control (IPPC) and National Emission Ceilings (NEC) Directives Marianne Wenning DG ENV, Head of Unit,

Iuliana CHIDU European integration counsellor Ministry of Environment and Water Management Prague - CZECH REPUBLIC April 2005 DIRECTIVE 96/61/EC.

IIASA International Institute for Applied Systems Analysis (IIASA) Potential and Costs for Controlling Particulate Matter in Europe.

Expert Group on Techno-Economic Issues (EGTEI) 14/06/ st EGTEI Panel Meeting on the sector of WASTE INCINERATION Paris – ADEME, June 14th, 2002.

UNECE workshop to promote ratification of Protocols, St Petersburg, 27 oct 09 - Emmanuel FIANI 1 Technical report on sources in the metallurgical sector.

Page 1 Annexes of the Directive 96/61/ES on IPPC Agency on Integrated Prevention Ms. Lucie Svobodová Integrated and Planned Enforcement of Environmental.

Typical Applications Triten Range Of Products. Flat Liners Quarry.

BAT information exchange - the heart of the IED

Fine particles: the views of the WG on Strategies and Review Richard Ballaman Chairman of WGSR Swiss Agency for the Environment, Forests and Landscape.

Control by existing protocols and current work under the Convention Richard Ballaman Chairman of WGSR Swiss Agency for the Environment, Forests and Landscape.

European Commission - Environment Directorate-General 14 February 2003 Developments in the framework of the IPPC Directive Magnus.

Separators Types of Dust Separator Cyclone Separator working & types Critical Parameters Advantages Disadvantages Applications maintenance.

Under Guidance of – Prof. SRIHARI Prepared By – ANUPAM MURMU ASHUTOSH GANDHEWAR KUSHAL MURARI

THE ENVIRONMENTAL IMPACT OF CONSTRUCTION MATERIALS AND METHODS

Options for controlling PM emissions

Annexes of the Directive 96/61/ES on IPPC

Steve Page Office Director, OAQPS NACAA Spring Meeting 2010

What Causes Air Pollution? Primary and Secondary Pollutants History of Air Pollution Motor Vehicle Emissions Industrial Air Pollution.

SERBIAN NATIONAL ACTION PLAN [DRAFT]

Horizon 2020 Information Day

Dr. Tanveer Iqbal Associate Professor,

International Institute for Applied Systems Analysis (IIASA)

Witt Environmental Science

INTRODUCTION AND OVERVIEW OF MANUFACTURING

ИНТЕГРИСАНА ДОЗВОЛА У РЕПУБЛИЦИ СРБИЈИ

Environmental Science Class Notes 03/02/17

What causes Air Pollution?

What causes Air Pollution?

Presentation transcript:

French-German Institute for Environmental Research, University of Karlsruhe 1 Particulate Matter Emissions from Industrial Sources (With the Iron & Steel Industry as an Example) U. Karl, O. Rentz French-German Institute for Environmental Research (DFIU/IFARE) University of Karlsruhe (TH), Germany Workshop of the UN/ECE Task Force on Integrated Assessment Modeling on the Potential and Costs for Controlling Primary Emissions of Fine Particulate Matter Laxenburg, November 2000

French-German Institute for Environmental Research, University of Karlsruhe 2 Particulate Matter (PM) Emissions from Industrial Sources Contents Introduction - Major sources of PM emissions in industry Fine Particulate Matter - Fractions of PM 10 in emissions from direct and fugitive emission sources PM Emission Reduction Measures - Process integrated emission control - End of pipe techniques - Control of secondary emissions Conclusions

French-German Institute for Environmental Research, University of Karlsruhe 3 Major Contributors to PM Emissions from Industry Mining of coal, lignite, metal ores Manufacture of non-metallic mineral products (Cement, lime, glass, bricks and tiles) Manufacture of basic metals (Iron and steel, non-ferrous metals) Manufacture of basic chemicals / fertilisers Manufacture of wood products (Chipboard, fibreboard) Manufacture of food products (Mills, sugar production) Waste incineration

French-German Institute for Environmental Research, University of Karlsruhe 4 Fractions of Fine Particulate Matter Direct Emissions Depending on dust control equipment Fabric filters % PM10 Electrostatic precipitators95 % PM10 Scrubbers90 % PM10 Cyclones % PM10 Fugitive Emissions Highly uncertain information; estimated fractions: Storage and handling20 % PM10 Industrial building ventingup to 75 % PM10 Reference: Remus R.: Feinstaub - Entstehung und Quellen der Feinstaubemissionen - Neue gesetzliche Regelungen; VDI Berichte 1478, 1999

French-German Institute for Environmental Research, University of Karlsruhe 5 Particulate Matter Emissions from Pig Iron Production Contribution of Fugitive Emissions Reference: Emission Control at Stationary Sources in the Federal Republic of Germany,Volume II DFIU/IFARE 1997

French-German Institute for Environmental Research, University of Karlsruhe 6 Process Integrated Emission Control Example: Emission Optimised Sintering Reference: EIPPCB Iron & Steel BREF January 1999

French-German Institute for Environmental Research, University of Karlsruhe 7 Emission Optimised Sintering - Multi-Pollutant Emission Reduction Reference: EIPPCB Iron & Steel BREF January 1999 (compared to conventional sintering)

French-German Institute for Environmental Research, University of Karlsruhe 8 Inertisation as an End of Pipe Measure Example: Blast Furnace Operation - Fume Suppression During Casting Description: Enclosed transport route for the hot metal; Minimal space between molten metal and covers; Flooding with nitrogen, if necessary Reference: Emission Control at Stationary Sources in the Federal Republic of Germany, Volume II, DFIU/IFARE 1997

French-German Institute for Environmental Research, University of Karlsruhe 9 Conventional Casting Bay Dedusting System Reference: Emission Control at Stationary Sources in the Federal Republic of Germany,Volume II DFIU/IFARE 1997

French-German Institute for Environmental Research, University of Karlsruhe 10 Economic Aspects of Dust Suppression Systems Reference: EIPPCB Iron & Steel BREF January 1999

French-German Institute for Environmental Research, University of Karlsruhe 11 Control of Secondary Emissions Primary and secondary off-gases from a converter

French-German Institute for Environmental Research, University of Karlsruhe 12 Collection Efficiency of Secondary Emissions Example: Basic Oxygen Steelmaking Reference: EIPPCB Iron & Steel BREF January 1999

French-German Institute for Environmental Research, University of Karlsruhe 13 Summary Depending on the sector, major contributions result from fugitive emission sources. Process integrated measures often entail multi-pollutant emission reduction. EoP Measures: Encapsulation of dust emission sources can lead to significant advantages compared to suction hoods and conventional dust abatement. Concerning the abatement of secondary emissions the collection efficiency is of mayor importance. Conclusion Dust control is more than fabric filters! Particulate Matter (PM) Emissions from Industrial Sources