Question & Suggestions March 17th The tanks can be positioned as indicated on the drawing. Where the auto fill cryogenics and electronics will be located? Strongly recommended to put them on the holding structure. (3 x 19’’ carets 40 cm in depth) No bridged walking path. Should the digitizer racks, beam left be rotated by 90 deg, parallel to the beam direction. Should the digitizers racks be set on rails? The optical cables to the digitizers to be on bridges on both sides? Where the water cooling pipes are located? Where the low power crates should be located and where the corresponding cables to the detectors go? Is the installation of the detectors simulated in the current lay out?

Question & Suggestions March 17th The tanks can be positioned as indicated on the drawing