Duct casings for particulate filters DCA Upstream side Side service door for easy filter change For the fitting of Mini Pleat filters or activated carbon filter cells • Clamping mechanism for secure sealing and air-tight fitting of the filter element • Quick installation: Casing frame can be used as connecting frame Downstream side

Duct casings for particulate filters DCA The duct casing can be installed into the duct using the casing frame as a connecting frame. Possible connecting flanges up to 40 mm on the upstream side and on the downstream side Common flange sizes on site are 30 mm The screws must be set at 15 mm from the bottom of the casing (mid of 30 mm flanges) The casing must be sealed on the perimeter connecting flanges when installed into the duct system Airflow

Duct casings for particulate filters DCA Frame system inside of the DCA with filters

Duct casings for particulate filters DCA Frame system inside of the DCA with filters The Mini Pleat Filter of the dimension 610x610x292 mm has to be placed on the support brackets Please consider that the flat section seal of the filter must be pressed against the frame system The clamping mechanism is used for the airtight fitting of the filter Clamping mechanism Support brackets for filter element