Managing Industrial Networks with Cisco Networking Technologies Dumps

Exam Information: Exam Number : IMINS Associated Certifications :Cisco Industrial Networking Specialist Duration : 75 minutes ( questions) Available Languages : English, Japanese Register :Pearson VUE Exam Policies : Read current policies and requirements Exam Tutorial : Review type of exam questions

Description: This exam tests a candidate's knowledge of the OSI layers of IP networks, as well as networking devices like routers and switches, and cabling approaches; specific industrial devices such as drives, PLCs, sensors, and substation equipment; relevant industrial standards and models such as TIA, the Purdue model, and environmental standards; and various safety protocols important in an industrial zone. Candidates can prepare for this exam by taking the Managing Industrial Networks with Cisco Networking Technologies course. Review the exam topics

Recommend Training: The following courses are recommended training for this exam. Managing Industrial Networks with Cisco Networking Technologies Networking Fundamentals for Industrial Control Systems Industrial Control Systems Fundamentals for Network Engineers Courses listed are offered by Cisco Learning Partners-the only authorized source for Cisco IT training delivered exclusively by Certified Cisco Instructors. Check the List of Learning Partners for a Cisco Learning Partner nearest you.

Sample Question No:01 Which prompt is used to configure parameters for the Ethernet ports of an industrial switch? A. Switch(config-if)# B. Switch(config-if-ind)# C. Switch(config-line)# D. Switch(config-ind)# E. Switch(config-vlan)# Answer: A

Sample Question No:02 Ether Net/IP is an Ethernet implementation of which protocol? A. CIP B. Industrial Protocol C. Device Net D. Control Net Answer: A

Sample Question No:03 Which characteristic causes multimode fiber-optic cable to differ from single mode? A. by allowing multiple network services in the same cable B. shorter maximum network segment length for a given bandwidth C. a wider variety of available connector types D. use outdoors as well as indoors Answer: B

Sample Question No:04 With a Cisco IE 2000 switch, what does a port status LED indicate when it is alternating green and amber? A. The port is sending or receiving data. B. A link is present. C. No link is present. D. There is a link fault. E. The port is not forwarding. Answer: D

Sample Question No:05 What does the Cisco PSIRT issue for significant security issues that directly involve Cisco products and require an upgrade, fix, or other customer action? A. Cisco Security Advisories B. Cisco Security Responses C. Cisco Security Notices D. Cisco Security Bulletins Answer: A

Managing Industrial Networks with Cisco Networking Technologies Dumps