1. If You Are Searching About Your 500-170 exam Dumps …..! https://www.dumps4download.co.in/free-500-170-practice-questions.html

2. Introduction : Designing the FlexPod Solution (FPDESIGN) https://www.dumps4download.co.in/free-500-170-practice-questions.html

3. Exam Number : 500-170 FPDESGN Associated Certifications : Cisco and NetApp FlexPod Design Specialist Duration : 60 Minutes (45 - 55 questions) Available Languages : English Register : Pearson VUE Exam Policies : Read current policies and requirements Exam Tutorial : Review type of exam questions About Exam : https://www.dumps4download.co.in/free-500-170-practice-questions.html

4. Exam Description: This exam tests a candidate's knowledge of tools and standards for assessing computing solution performance characteristics and requirements. In addition this exam will test a candidate's knowledge of hardware components associated with the FlexPod Solution and the process for selecting proper hardware for a given set of requirements. Recommend Training: The following course is the recommended training for this exam. Designing the FlexPod Solution Courses listed are offered by Cisco Learning Partners-the only authorized source for Cisco IT training delivered exclusively by Certified Cisco Instructors. Check the List of Learning Partners for a Cisco Learning Partner nearest you.

5. Sample Question No:01 Which four are components of Cisco UCS stateless computing? (Choose four) A. Utilization of service profiles to apply parameter settings from server hardware B. Elements of a server’s personality, which may be included in a service profile, include firmware versions, UUID, MAC Addresses, World Wide Names, and boot settings. C. A one to one mapping of an application to a server D. Boot from SAN E. Every physical server in a Cisco UCS instance should remain anonymous until you associate a service profile with it F. A one to one mapping to the identity information burned into the hardware (mac addresses, etc). Answer: A,B,D,E https://www.dumps4download.co.in/free-500-170-practice-questions.html

6. Sample Question No:02 Which of the following is an example of a Cisco UCS high availability component? A. Clustered fabric interconnects B. vMotion C. Live migration D. Cluster shared volumes Answer: A https://www.dumps4download.co.in/free-500-170-practice-questions.html

7. Sample Question No:03 Which traffic through a UCS 6200 cluster can be in Active- Standby mode? A. Data traffic only B. FHRP C. Data and management traffic D. Management traffic only Answer: D https://www.dumps4download.co.in/free-500-170-practice-questions.html

8. Sample Question No:04 Clustered Data ONTAP 8.1 or later provides what four storage efficiency features? (Choose four.) A. compression B. deduplication C. FlexClone D. MetroCluster E. thin provisioning F. transparent files Answer: A,B,C,E https://www.dumps4download.co.in/free-500-170-practice-questions.html

9. Sample Question No:05 Before being added to an interface group, interfaces must be in what state? A. Active B. Down C. Maintenance D. Up Answer: B https://www.dumps4download.co.in/free-500-170-practice-questions.html

10. Designing the FlexPod Solution (FPDESIGN) https://www.dumps4download.co.in/free-500-170-practice-questions.html