1. Want to Pass Designing Cisco Network Service Architectures Exam??

2. Exam Information: Exam Number : 300-320Associated Certifications : CCDPDuration :75 minutes (60 - 70 questions)Available Languages : EnglishRegister : Pearson VUEExam Policies : Read current policies and requirementsExam Tutorial : Review type of exam questions https://cisco-300-320-braindumps.blogspot.com/

3. Exam Description: This exam tests a candidate's knowledge of the latest development in network design and technologies, including L2 and L3 infrastructures for the enterprise, WAN technologies, data center integration, network security and network services. The following course is the recommended training for this exam. Designing Cisco Network Service Architectures (ARCH) v3.0 Courses listed are offered by Cisco Learning Partners-the only authorized source for Cisco IT training delivered exclusively by Certified Cisco Instructors. Check the List of Learning Partners for a Cisco Learning Partner nearest you Recommend Training:

4. Sample Question NO:01 Which of the following facts must be considered when designing for IP telephony within an Enterprise Campus network? A. Because the IP phone is a three-port switch, IP telephony extends the network edge, impacting the Distribution layer. B. Video and voice are alike in being bursty and bandwidth intensive, and thus impose requirements to be lossless, and have minimized delay and jitter. C. IP phones have no voice and data VLAN separation, so security policies must be based on upper layer traffic characteristics. D. Though multi-VLAN access ports are set to dot1q and carry more than two VLANs they are not trunk ports. Answer: D https://cisco-300-320-braindumps.blogspot.com/

5. Sample Question NO:02 What is an advantage of using the vPC feature in a data center environment? A. VSS is a requirement. B. Multiple instances of control plane are formed. C. The control plane and management plane remain separate. D. Cisco FabricPath technology does not have to be configured. Answer: C https://cisco-300-320-braindumps.blogspot.com/

6. Sample Question NO:03 Which interface characteristic is used to calculate cost of an interface in OSPF? A. Bandwidth B. Latency C. Load D. Reliability Answer: A https://cisco-300-320-braindumps.blogspot.com/

7. Sample Question NO:04 IP multicast packets when designing IPSec VPN? A. IPSec forwarding using tunnel mode B. Encapsulation of trafic with GRE or VTI C. Additional bandwidth for headend D. IPSec forwarding using transport mode Answer: B https://cisco-300-320-braindumps.blogspot.com/

8. Sample Question NO:05 HSRP has been implemented on distribution switches but no priority has been defined. Which one of the two switches will be active ? A. The one with the higher IP address configured on the interface B. The one with the higher MAC address configured on the interface C. The one which booted the last D. The one with the higher bandwith configured on the interface Answer: A https://cisco-300-320-braindumps.blogspot.com/

9. 300-320 Dumps With Real Exam Question Answers - 300-320 Study Material With DumpsProfessor.com https://200-105-exam-braindumps.blogspot.com/ https://cisco-300-320-braindumps.blogspot.com/