1. Implementing Cisco Tele Presence Installations https://www.dumps4download.co.in/free-642-188-practice-questions.html

2. Exam Information : Exam Number :642-188 ITI Associated Certifications :Cisco Tele Presence Installation Specialist Duration :90 minutes (70-80 questions) Available Languages :English Register for Exam : Pearson VUE Exam Policies : Read current policies and requirements Exam Tutorial :Review type of exam questions

3. Exam Description : Implementing Cisco Tele Presence Installations (ITI) #642-188 is the exam associated with the Cisco Tele Presence Installations Specialist. Implementing Cisco Tele Presence Installations (ITI) is designed to give learners a strong understanding of physical installations of Cisco Tele Presence systems 500, 1000, 1100, and 1300. Topics include room readiness recommendations, physical assembly of single-screen systems, codec cabling, first-time setup, camera tuning, and installation of auxiliary devices such as document cameras. Resulting skills development enables network engineers and technicians to install the furniture; to construct the frame, table, stand, and wall mount; and to connect the cables and networking equipment for the Cisco Tele Presence systems 500, 1000, 1100, and 1300. https://www.dumps4download.co.in/free-642-188-practice-questions.html

4. Sample Question NO:01 After connecting to a codec via Web GUI, you are prompted for a username and password. Which username password combination is used on the codec by default? A. Cisco, Cisco B. admin, Cisco C. Cisco, Cisco D. admin, cisco Answer: B https://www.dumps4download.co.in/free-642-188-practice-questions.html

5. Sample Question NO:02 Which statement is correct when discussing the Cisco Tele Presence System 1300.? A. The system is designed to support meetings of six to eight participants B. The system features three 65-inch screens, three cameras, microphones, and speakers C. Voice-enabled switching is performed by the codec to select the active speaker in the room and capture the video for the remote side D. The power and Ethernet outlets must be positioned directly behind the unit Answer: C https://www.dumps4download.co.in/free-642-188-practice-questions.html

6. Sample Question NO:03 When using Auto-Collaborate, what two actions need to be done to display the laptop content after connecting the cable? (Choose two.) A. Press the Auto-Collaborate soft key B. Initiate Auto-Collaborate on the codec s GUI C. Set the laptop resolution to 1024x768 D. Set your laptop resolution to 1024x720 E. Use function key on the laptop to send signal to external display Answer: C,E https://www.dumps4download.co.in/free-642-188-practice-questions.html

7. Sample Question NO:04 In the Cisco Tele Presence administration Web GUI, the camera Auto Adjust can be used to check which setting? A. life size B. zoom and focus C. white color balance D. HDMI input threshold Answer: C https://www.dumps4download.co.in/free-642-188-practice-questions.html

8. Sample Question NO:05 Which three statements are correct when tuning the camera on a Cisco Tele Presence CTS-1xxx system? (Choose three.) A. Target placement should match the green and red boxes on the screen, respectively B. Place the large target three feet behind the small target. C. Place the large target five feet behind the small target D. Tune the camera so that the red and green bars line up as closely as possible E. Perform auto-adjust to optimize focus and sharpness Answer: A,C,D https://www.dumps4download.co.in/free-642-188-practice-questions.html

9. Implementing Cisco Tele Presence Installations https://www.dumps4download.co.in/free-642-188-practice-questions.html