Year 7 RM Wood Belt Sander Name of Equipment Image Usage/Definition Belt Sander An electrically powered, portable sanding tool with a continuous abrasive belt driven in one direction only Bench Hook its purpose is to provide a stop against which the piece of wood being worked can be firmly held, without having to use the vice Claw Hammer a hammer with one side of the head split and curved, used for extracting nails Coping Saw a saw with a very narrow blade stretched across a D-shaped frame, used for cutting curves in wood Cork Sanding Block a block used to hold sandpaper Disc Sander a machine with a flat circular disk faced with abrasive for smoothing wood surfaces Name of Equipment Image Usage/Definition G-Clamp a type of clamp device typically used to hold a wood or metal workpiece Safety Glasses toughened for protecting the eyes when using power tools equipment. Sand Paper paper with sand or another abrasive stuck to it, used for smoothing or polishing woodwork or other surfaces. Scissors an instrument used for cutting cloth, paper, and other materials. Screwdriver (Terminal) a tool used for turning screws; usually a wooden or plastic handle with a thin flattened square-cut tip. Screwdriver (Philips Head) a tool used for turning screws; usually a wooden or plastic handle with a thin cross-cut tip.

Name of tool/ equipment Name of Equipment Image Usage/Definition Smoothing Plane Plaining the wood off in strips, rather than by successive buffing and scratching Steel Ruler A tool for accurately measuring materials Tenon Saw a small saw with a strong brass or steel back for precise work Tri- Square a woodworking or a metalworking tool used for marking and measuring a piece of wood Woodworking Vice a vise with jaws that are padded in order to hold lumber without denting it Name of tool/ equipment Image Usage/Definition Hole Saw a tool for making circular holes Countersink bit a bit for enlarging the upper part of a hole. Screws become flush with the surface Chuck It is a specialised type of clamp used to hold an object with radial symmetry, especially a cylinder Chuck key a small metal device for tightening the chuck of a drill Flat drill bit splinter out the back side of the hole when they cut through