Connect(register) old KX-HDVxxx to HTS824(HTS32) by manual operation (sample case: old KX-HDV130 that does not support automatic registration ) 1st release: Sep. 27th 2016

Contents 1. Caution (automatic restart on KX-HDVxxx by automatic up-date) 2. KX-HDVxxx firmware version. 3. Sample situation/condition for old HDV130 registration to HTS824 by manual. 4. Set-up sample on KX-HTS824 side 5. Set-up sample on KX-HDV130 side This document for connecting old KX-HDVxxx SIP phone to KX-HTS824(HTS32) with sample case. However, in case of old firmware (HDV100/130 V1.063 and older, HDV230 V1.012 and older), it will be better to up-date them at first. Then, you can up-date them from HTS824 operation easily from next time.

1. Caution (automatic restart on KX-HDVxxx by automatic up-date) If network allow (direct or through PBX) to connect Internet, KX-HDVxxx phone will start automatic firmware up-date via re-direction server after factory reset on KX-HDVxxx (or start-up 1st time), by several automatic restart. During the up-date process, please do not make factory reset on KX-HDVxxx. Otherwise, up-date program on HDVxxx is damaged by the operation and HDVxxx cannot start-up correctly.

2. KX-HDVxxx firmware version. Following version can be registered to HTS824(HTS32) automatically in same network after just factory reset on KX-HDVxxx. HDV100/130: V1.064 and later HDV230: V1.013 and later Panasonic KX-HDV130 Panasonic KX-HDV130 Panasonic KX-HDV130 Panasonic KX-HDV130 Status Firmware version Menu System Setting Following version cannot be registered to HTS824(HTS32) after factory reset on KX-HDVxxx. This document show how these HDVxxx register to HTS824. However, it is better to up-date HDVxxx at first. Because above-mentioned version allow that HTS824 show HDVxxx as up-date target device for easy way. HDV100/130: V1.063 and older HDV230: V1.012 and older

3. Sample situation/condition for old HDV130 registration to HTS824 by manual. HTS824 IP address: 192.168.0.101 HDV130 (static) IP address: 192.168.0.130 PC IP address: 192.168.0.10

4. Set-up sample on KX-HTS824 side (page 1 of 3) Change from analog port (default) to SIP port

4. Set-up sample on KX-HTS824 side (page 2 of 3) Change from analog port (default) to SIP port SIP User Name: ID for SIP phone Password: Please assign (12345)

4. Set-up sample on KX-HTS824 side (page 3 of 3) Reason why “PBX access port” on HDVxxx side have to be changed to “33824”.

5. Set-up sample on KX-HDV130 side (assign static IP address) Panasonic KX-HDV130 Panasonic KX-HDV130 Panasonic KX-HDV130 Panasonic KX-HDV130 Network Setting IPv4 Setting Menu System Setting Panasonic KX-HDV130 Panasonic KX-HDV130 Panasonic KX-HDV130 IP address 192.168.0.130 Subnet mask 255.255.255.0 Static OK Panasonic KX-HDV130 Panasonic KX-HDV130 In some cases, LLDP may have to be set disable. You can change this setting through HDVxxx Web programming. LLDP LLDP OFF

5. Set-up sample on KX-HDV130 side (make Web program to enable) Panasonic KX-HDV130 Panasonic KX-HDV130 Panasonic KX-HDV130 Basic Setting Other Setting Menu Panasonic KX-HDV130 Panasonic KX-HDV130 Embedded web Embedded web On

5. Set-up sample on KX-HDV130 side through Web page (EXT.number) 119 (Change PBX access port to)33834 (PBX ip address:) 192.168.0.101 (SIP user ID:) phone-019 (password:) 12345

5. Set-up sample on KX-HDV130 side through Web page If LLDP is not used by network, please change LLDP to No. In some cases, LLDP may have to be set disable.

Up-date history Sep. 27th 2016: 1st release