Front loaders boasting top performance Cold milling machines W 100 F, W 120 F, W 130 F

Cold milling machines W 100 F, W 120 F, W 130 F Faster, more convenient and more economical all round

Cold milling machines W 100 F, W 120 F, W 130 F Most powerful cold milling machines in the 1-m class

The fully equipped operator’s platform of the W 100 F sets new standards in both ergonomical quality and functionality. Cold milling machines W 100 F, W 120 F, W 130 F A workplace with every comfort

Cold milling machines W 100 F, W 120 F, W 130 F Both ergonomical and functional The most important control elements are integrated into the right-hand armrest. Full control from the seat, which can be moved out over the side of the machine. Clearly structured graphic display for the fast retrieval of information.

Cold milling machines W 100 F, W 120 F, W 130 F LEVEL PRO sets new standards in levelling technology

Automatic ON / OFF Switchover button Target value Actual value Controller output Memory 1Memory 2 Cylinder RAISE/LOWER Calibration Target value RAISE/LOWER Horn Settings Cold milling machines W 100 F, W 120 F, W 130 F LEVEL PRO: all functions in full view at all times

The levelling mode can be switched between a two-sided milling depth and a one-sided milling depth plus slope at any time. Cold milling machines W 100 F, W 120 F, W 130 F Precision has never been so simple

WIDRIVE is the ground-breaking machine control system for maximum performance. WIDRIVE enables the machine’s control system to manage numerous commands and functions that would ordinarily have to be carried out by the machine operator. Cold milling machines W 100 F, W 120 F, W 130 F WIDRIVE – state-of-the-art machine control

Cold milling machines W 100 F, W 120 F, W 130 F Ample power reserves yet still economical If the W 100 F needs more power when operating at full load, the engine output increases. As the engine speed is controlled automatically, the engine consumes even less fuel in the process.

The front crawler tracks of the manoeuvrable W 100 F cold milling machine have a large steering lock. Cold milling machines W 100 F, W 120 F, W 130 F Manoeuvrability is a real asset

Cold milling machines W 100 F, W 120 F, W 130 F The ultimate in manoeuvrability The rear track can be steered even when swivelled in front of the drum to precisely maintain the milling direction.

Cold milling machines W 100 F, W 120 F, W 130 F Swivelling the rear crawler track in and out The rear right track can be swivelled in front of the milling drum hydraulically from the operator’s platform to allow milling flush to kerb.

Cold milling machines W 100 F, W 120 F, W 130 F Quick change for fast work

Cold milling machines W 100 F, W 120 F, W 130 F HT11 quick-change toolholder system for economical operation HT11 enables tool- holders to be replaced quickly and easily. The low-wear system is designed for heavy-duty operation on the job site. Conical pressure stud for reliable transmission of clamping force Strong retaining bolt prevents unwanted loosening of upper part Protective plug prevents soiling of bolt head Upper part covers bottom part completely to minimize deformation of contact surface Optimized shaft angle geometry for improved component strength Wear markers at 5 mm intervals for improved monitoring Chip breaking rib for additional crushing of milled material Contact surface increased by 75% for improved durability of bottom part Seal to allow simple and quick insertion/removal of upper part

Cold milling machines W 100 F, W 120 F, W 130 F W 100 F with 1.0 m working width – and optional FCS

Cold milling machines W 100 F, W 120 F, W 130 F W 120 F with 1.2 m working width – and optional FCS

Cold milling machines W 100 F, W 120 F, W 130 F W 130 F with 1.3 m working width – and optional FCS

Cold milling machines W 100 F, W 120 F, W 130 F Clean and safe operation The straight, left-hand side plate ensures improved material loading. The side plate can be raised hydraulically and seals off the drum chamber. A protective bracket secures the hazard area of the milling drum.

Cold milling machines W 100 F, W 120 F, W 130 F High daily production is part of the conveyor system In addition to the long standard conveyor model, a folding discharge conveyor can be supplied in long or short design.

Cold milling machines W 100 F, W 120 F, W 130 F Vacuum Cutting System VCS

Cold milling machines W 100 F, W 120 F, W 130 F Large flaps for servicing and all you need behind them The service flaps are particularly large and can be opened wide so that all points of maintenance are easily accessible. Lubrication and servicing points have been grouped together.

Cold milling machines W 100 F, W 120 F, W 130 F The front loaders in versatile operation