1. Integrated Training Course
Jetway
Integrated Training Course

2. Jetway Integrated Training
One continuous training programme over approximately 18 months
Five flight stages with Theoretical knowledge completed in two stages
Basic is carried out in tandem with Stage one and two of flying
Advanced is then completed full time before final stages of flying

3. Phase One Basic Flight Training including circuits
Culminates with first solo circuit
13 hours Tecnam P2008

4. Phase Two
Intermediate training including Navigation and introduction into instrument flight
33 hours Tecnam Aircraft
5 hours FNPT Simulator ALX

5. Phase Three
Advanced visual flight training progressing to more complex aircraft
Also covered is night flying, radio navigation and instrument flight, general handling and limited panel operations
6.5 hours Tecnam (night)
48.5 hours PA28 + PA28R
5 hours ALX FNPT2

6. Phase Four VFR multi engine conversion
Advanced instrument training including applied instrument flight and approaches and airways flight
30 hours ALX FNPT2
50 hours DA42

7. Phase Five MCC/JOC Multi – crew Co-operation Jet Operator Course
Medium Size generic Jet (B737/A320)
Jet familiarisation, RTO, EFATO, System failures, Upset Training all as part of the normal two crew set up on Turbo fan aircraft
24 hours ALX

8. Jetway Integrated Training
Integrated Course Utilises brand new Tecnam glass cockpit Aircraft for basic training
3 x actual twin engine flight time as modular route
Perceived by some airlines as superior product (although biggest employer of low hour cadets eg. Ryanair, Flybe etc. will take graduates from other scheme )