1. INTEGRATED DESIGN PROJECT BFC 43303

2. IDP NEEDS….. Architectural Drawing
Site Key Plan (Infrastructure) –make sure layout plan consists of site spot level (contour line), exist. utilities, exist. facilities, existing data extent beyond site boundary)
Building Key Plan (Structure)- Floor key plan, side-front-back elevation, building cross section
SI Report
Bore Log, SPT value..etc
MSMA (Manual Saliran Mesra Alam)- Design for surface runoff.
Arahan Teknik Jalan JKR – Road design
Building Work Specification – JKR
Euro Code – Structure design

3. Documents to be submitted….
Infrastructure
Earthwork
Road and Drainage
Sewerage
Water reticulation
Structure
Compulsory
Preliminary Report & Final Report
Choose one

4. Drawing to be prepared…
Infrastructure
Earthwork
Key Plan Dwg- Slope, Retaining wall, DP or OSD, PL…
Cut and fill Dwg- differentiate with colour
Typical drawing detail Dwg- cross section for ; slope, retaining wall, earthwork.
ESCP (Erosion Sediment Control Plan)
Key plan Dwg. – propose temporary earth drain, silt trap, wash through, temporary crossing (drainage-culvert), site office location, hoarding, material storage, temporary excess.
Typical detail Dwg- Silt trap, wash through, hoarding, temporary drain, slope protection
Road and drainage (R&D)
Key Plan Dwg.- combine for both road and drainage (include road alignment, location road signage, drain network, drain invert level (IL), shoulder, parking area, road furniture..
Typical Detail Dwg.-Pavement /Road thickness cross section, road signage, road furniture, side drain, drainage, sump, culvert and etc..
Sewerage
Key Plan/Layout Plan – sewerage network, mainhole location, invert level,
Detail Dwg.- mainhole, longitudinal cross section for pipe network include invert level, septic tank detail or STP.

5. Structure Water reticulation
Key Plan Dwg- consist of pipe network from tapping point to water tank, location of sluice valve, air valve, meter, hydrant (90m interval)
Detail Dwg- sluice valve, air valve, meter, hydrant,
Structure
Foundation lay out Dwg- pilecap/pad footing/raft-include column loading
Detail Dwg-reinforcement distribution for foundation
Each floor layout Dwg- Include beam/column/slab label.
Beam detail Dwg for each floor
Column detail for the whole storey of building
Slab detail layout Dwg for each floor
Slab cross sectional for each floor
Stair case detail
Shear wall/Lift core detail if any

6. Preliminary report consists of:
Brief description of project-nos of storey, project total cost, project location, space usage….
Conceptual planning (sketch)-location of RC wall, silt trap location, beam/column/slab location, R&D location and etc…
Standard and guideline to be used; MSMA, Arahan Teknik Jalan, Eurocode and etc…
Parameters and data to be used; building loading case, soil bearing capacity, slope gradient, and etc
Final report consists of:
Detail description of project and team working
Analysis and design
Calculation – for structure manual calculation and software
Drawig-key plan and detail
Cost estimation-Bill of Quantities (BQ)-taking off…
Appendices