1. Exercise Lecture 7 Completing Exercise - Lecture 6 1.Create Your Own Blocks 2.Insert Blocks to Your New Drawing 3.Using Different Hatching Types

2.  Create new drawing named (My Blocks),  Change drawing units to be metric,  Draw door & window and create door and window blocks,  Open Design Center and go to Home Designer then create tool palette  Insert the following blocks from these palettes. Create Your Own Blocks

3. Insert Blocks to Your New Drawing  Open your previous (Ground Floor Plan) drawing,  Insert doors and windows blocks from (My Blocks) Drawing,  Align them in their suitable places,  Insert bathroom blocks as shown in the following drawing,

4. Using Different Hatching Types  Create new layer (Hatch),  Use suitable hatching types for Bath and Balcony spaces as shown in the following drawing.