1. Transfers WcBc is configured for Multiple types of Transfers. WcBc is configured for Multiple types of Transfers. Transfer Full Units Transfer Full Units Transfer Partial Units Transfer Partial Units Transfer Rack to Rack Transfer Rack to Rack Multiple Units Transfer Rack to Rack Multiple Units Transfer Rack to Rack

2. Transfer – Full Units 1) 2) Scan the To Unit Id. This type of Containment is based on the From Unit Id type. For example you cannot transfer a Pallet Id to a Container Id. ¹ See the Rules for Entering/Scanning Unit Ids and Pallet Ids. 2)3) 1) Scan the From Unit Id. This can be any type of Containment. 3) Scan the To Pallet Id (Optional). This is the pallet that the Unit id will be placed upon.

3. Full Units (Continued) 4) 5) 4) Scan the Location To. This will be defaulted to the Location of the To Unit Id. Function Keys F5=Inventory Inquiry 5) The Transaction Accepted with the “IT” number will be displayed for 2 seconds.

4. Transfer – Partial Unit’s 1) ¹ See the Rules for Entering/Scanning Unit Ids and Item numbers. 2)3) 3) Enter the Quantity to Transfer to another Unit Id. Function Keys F2=Calculator F5=Inventory Inquiry 1) Scan the From Unit Id. This can be any type of Containment. 2) Scan the Item from the Product. If the Item was Lot Controlled then the next prompt would be the Lot Number. Function Keys F5=Inventory Inquiry

5. Partial Units (Continued) 4) ¹ See the Rules for Entering/Scanning Item numbers. 5)6) 6) Scan the Location To. Function Keys F5=Inventory Inquiry 4) Scan the To Unit Id. This type of Containment based on the From Unit Id type. For example you cannot transfer a Pallet Id to a Container Id. Function Keys F5=Inventory Inquiry 5) Scan the To Pallet Id (Optional). This is the pallet that the Unit id will be placed upon. Function Keys F5=Inventory Inquiry

6. Partial Units (Continued) 7) 7) The Transaction Accepted with the “IT” number will be displayed for 2 seconds.

7. Transfer – Rack to Rack 1) ¹ See the Rules for Entering/Scanning Unit Ids. 2)3) 1) Scan the From Unit Id. This can be any type of Containment. 2) Scan the Location To. Function Keys F5=Inventory Inquiry 3) The Transaction Accepted with the “IT” number will be displayed for 2 seconds.

8. Transfer – Multiple Units Rack to Rack 1) ¹ See the Rules for Entering/Scanning Unit Ids. 2)3) 1) Scan the 1 st Unit Id to Transfer. Function Keys F6=Finish 2) Scan the 2nd Unit Id to Transfer. Function Keys F6=Finish 3) Scan the 3rd Unit Id to Transfer. Function Keys F6=Finish

9. Multiple Units Rack to Rack 4) ¹ See the Rules for Entering/Scanning Unit Ids. 5)6) 5) Scan the Location To.6) The Transaction Accepted will display with the number of Units transferred. 4) Press the F6 key when finished scanning all the Unit Ids. Function Keys F6=Finish