1. Industrial Product Information EXCLUSIVE CANADIAN DISTRIBUTOR FOR SUREHOLD ADHESIVES

2.  Stud & Bearing formula is a high strength, thread-locking anaerobic material that cures and locks between threaded connections to lock seal and retain. Resists leakage, shock and vibration. Ideal for fasteners 3/8” to 1” prior to assembly.  Locks, seals and secures parts that must withstand heavy shock and vibration. Permanent strength – for assemblies that do not require frequent disassembly  Keep nuts and bolts from coming loose  Prevents rust and corrosion  Conforms to MIL-S-46163A, ASTM D-5363, NSF  Patented Dispenser  Drip-Proof, Clog-Proof Applicator, product won’t clog or dry up with repeated use  Push the button on tube cap to puncture seal, twist off cap and apply  Precise and controlled distribution of the threadlocker  Minimum clean up, tube pulls the threadlocker back into the tube when you release pressure  A Minimum of 12 months shelf life once product has been opened and used  Use on engine bolts and fittings, inner tie rods, transmissions bolts, power steering, frame bolts, idler bearing, press fit filter tubes, shock absorber bolts, ring gear bolts, cylinder block studs, crank shaft bolts and more.  Automobiles, RV’s and Recreational Equipment  Farm Machinery  Heavy Duty Power Tools

3.  An all-purpose, medium strength thread-locking anaerobic material that cures and locks between threaded connections. Resists leakage, shock and vibration. Ideal for all nut and bolt applications 1/2” to 3/4”  Eliminates the need for lock nuts and lock washers. Easy disassembly - can be removed with hand tools  Locks and seals while preventing parts from loosening due to shock and vibration  Prevents rust and corrosion  Conforms to MIL-S-46163A, ASTM D-5363, NSF.  Patented Dispenser  Drip-Proof, Clog-Proof Applicator, product won’t clog or dry up with repeated use  Push the button on tube cap to puncture seal, twist off cap and apply  Precise and controlled distribution of the threadlocker  Minimum clean up, tube pulls the threadlocker back into the tube when you release pressure  A Minimum of 12 months shelf life once product has been opened and used  Use on all types of nuts, bolts and threaded connections on vehicles, power tools, bicycles, and more. Not recommended for use on plastic threads, nuts or bolts.

4. Low Odor, Low Blooming Cyanoacrylate Adhesive Industrial Strength Excellent for use on applications where appearance matters Leave little to no white residue when dry Eliminates frosting and odors typically associated with super glues Works on numerous surfaces and can be used for bonding a variety of plastics, metals and rubbers especially where a good cosmetic outcome is desired. Use on electrical components, circuit boards and automotive applications Great for use in areas with poor ventilation Excellent for use in 3D printing process – set and seal images in the final stages Low Odor, Low Blooming Cyanoacrylate Adhesive is a one-component, solvent-free system and does not require the use of a catalyst, heat or clamps Slower setting super glue allows you to adjust parts Dries to a transparent, colorless to straw color Part No. SH-201 (20gr)* * larger sizes available

5. Surface Insensitive Super Glue Industrial Strength Specially formulated for bonding dry, porous and acid surfaces, such as Wood, paper-made products, PU foam, cork, rubber and ceramics Designed for the assembly of difficult to bond substrates that require high shear strength For use on applications that require rapid bonding between well mated surfaces such as rubber, metal, plastic, glass, etc. Bond porous or absorbent materials such as wood, paper and fabric. Fast setting and is suitable for continuous or automated production lines Dries to a transparent, colorless to straw color Part No. SH-601 (20gr)* * larger sizes available

6. Industrial Strength Designed for use in higher temperature and higher humidity environments A rubber toughened, high viscosity cyanoacrylate that can be used where flexibility and vibration resistance is required. Suitable to bond difficult materials such as thermal plastic and possess faster fixturing than epoxy resin, making it ideal for construction work Ideal for bonds subject to daily use and harsh conditions Forms a strong bond when a thin layer of SUREHOLD ® B680 is applied between two surfaces and comes into contact with atmospheric moisture a rapid polymerization occurs producing the ultimate bond Works best on: Metal, Rubber, Wood, Plastic & other materials Dries black Part No. SH-B680 (20gr)* * larger sizes available B684

7. Page 7 6011 Industrial Strength  Medical Device Cyanoacrylate Adhesive o Formulated for the assembly of components in a medical device o Certified to meet ISO 10993 biocompatibility standards o Certificates of Compliance are available o This single component ethyl cyanoacrylate cures rapidly o No mixing or heating required for cure o High Strength o Instant Bond o Flexible Adhesive o Low viscosity, 100 cPs o Bonds well mated surfaces such as rubber, metal, plastics, glass, composites and more o Also bonds porous or absorbent materials such as wood, paper and fabric o Part No. SH-6011 (20gr) shown* * larger sizes available

8. Super Repair for Metal Super Repair Gap Filler Super Repair Flexible Instant Adhesive Multi-substrate. Ideal for plastic parts (i.e. auto bumpers and panels) Targeted Substrate (Aluminum/Metal) Fills gaps, cracks and gouges on porous and irregular surfaces Flexible/Elastic/Bond/Seal These four new hybrid adhesives were designed to incorporate the fast cure speed of cyanoacrylates with the strength and durability of epoxies. With these four formulations you can bond almost anything including tough to bond plastics with the polyphen primer, metal, alloys, cast iron, aluminum, wood, concrete, brick, stone, rubber, fabric, cloth and more! High Strength Easy to Use – Precision Application Use for Assembly & Repair Can be drilled, tapped, sanded and painted

9. SureHold’s ® Helios TM Light and Moisture Cure Cyanoacrylate is a fast curing, low blooming, multiple viscosity, clear to pale green adhesive designed for OEM assembly applications that require a low out-gassing for sensitive electronics, excellent aesthetics, very rapid fixturing, fillet cure or surface cure. The light cure properties facilitate rapid curing of exposed surface areas, thereby minimizing assembly time, the unique formulation insure reduces blooming during the secondary cure providing an alternative to solvent borne accelerators. Suitable for use in the assembly of disposable medical devices, sensitive electronics, and hearing aids. ISO 10993 Certified Features & Benefits Odorless Extremely fast tack-free curing in 2-5 seconds Cures with UV/Visible light; cures in shadowed areas Good cosmetic appearance Good for sensitive electronic assembles Eliminates need for accelerators Good adhesion to plastics, elastomers and metals ISO 10993 Biocompatible

10. Page 10 EXCELLENT FOR USE ON APPLICATIONS WHERE APPEARANCE & STRENGTH MATTER Transforms the once brittle models making your creations POP and STAND OUT with COLOR Our patent pending process infuses and impregnates the 3D printed models making them strong, durable and long-lasting Eliminates frosting and odors typically associated with super glues Low out-gassing... Great for use in areas with poor ventilation A single-component, one-part room temperature cure, solvent-free system that does not require the use of a catalyst, heat or clamps Color: Transparent, colorless to straw color 3D Fix is great for impregnating your gypsum-based 3D printed models Wicking grade, low out-gassing instant adhesive Designed for added strength, durability and sealing that provides a low cost, value added advantage Make your 3D models up to 6 times stronger in tensile strength! This process is ideal for stop motion animation models, prototypes, professional and architectural models, engineering models, consumer product models, fine art production; and, of course, assembly applications with high cosmetic appearance! LOW ODOR, NON-BLOOMING, LOW VISCOSITYLOW ODOR, NON-BLOOMING, LOW VISCOSITY

11.  Use SureHold’s 3DFix Activator to accelerate the cure of 3DFix CA Adhesive as well as other CA Adhesives.  3DFix Activator is used to increase and assure proper cure of all Cyanopoxy adhesives o Contains a special catalyst with aggressive cleaning and degreasing properties to remove surface contamination.  It can be either pre- or post-applied o The product is especially suited for post-application on Cyanopoxy adhesives to ensure rapid and complete curing. o Pre applying is recommended on porous, large bond gaps, inert surfaces or contaminated surfaces.  Excellent for cosmetic application where aesthetic (clear and transparent fillet) are needed.  3DFix Activator is especially suited for post applied applications. o Speeds the cure time of high viscosity CA Adhesives o Aids CA Adhesives in bonding difficult to bond substrates