1. 1 Mutual Aid District Dispatch Procedures 1.Contact the Task Force/Strike Team Commanders 2.Determine Assembly Staging Area 3.Advise Statewide Control Center of Staging Area and Commander information 4.Dispatch all Companies to Assembly Staging Location 5.Confirm the deployment of all Required Assets

2. 2 Mutual Aid District Dispatch Procedures 6.Maintain Communications with Commander, Statewide Control Center and Destination Dispatch Center 7.Confirm Response of Convoy from Assembly Staging Area to Destination 8.Provide Status Reports to NH Control Center every 4 hours 9.Provide Status Reports to District Mutual Aid Departments

3. 3 District Worksheet

4. 4 Requesting Community Procedures 1.Contact Statewide Control Center, specify Task Force/Strike Team Requested 2.Specify the Staging Area or Location that you want the Task Force/Strike Team to report to 3.Relay Incident Type/Location, Your Dispatch Center Phone Number, Your Radio Frequency 4.Maintain Communications with Statewide Control Center 5.Task Force/Strike Team Communications are on Frequency 154.280

5. 5 Community Worksheet

6. 6 Task Force/Strike Team Commander Procedures 1.Determine/Advise Control Center of Task Force/Strike Team Assembly Staging Area 2.Proceed to and set up Assembly Staging Area 3.Assemble and Inventory all Response Assets and Personnel (See Reverse Side of Worksheet) 4.Begin Convoy, under Police Escort, to Destination, Advise Control Center By Phone or Radio 5.Establish Communications with Destination Dispatch Center

7. 7 Task Force/Strike Team Commander Procedures 6.Confirm Response Destination Staging Area and/or Team Assignment 7.Establish Communications with Incident Commander 8.Manage and Operate to Best Advantage 9.Confirm Logistical Support Needs (Personnel Rehab, Food, Fuel, Water, etc) 10.Provide Status Reports to NH Control Center