Presentation is loading. Please wait.

Presentation is loading. Please wait.

FPGA and ASIC Technology Comparison - 1 © 2009 Xilinx, Inc. All Rights Reserved How Do I Plan to Power My FPGA?

Similar presentations


Presentation on theme: "FPGA and ASIC Technology Comparison - 1 © 2009 Xilinx, Inc. All Rights Reserved How Do I Plan to Power My FPGA?"— Presentation transcript:

1 FPGA and ASIC Technology Comparison - 1 © 2009 Xilinx, Inc. All Rights Reserved How Do I Plan to Power My FPGA?

2 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 2 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 2 © 2009 Xilinx, Inc. All Rights Reserved Objectives After completing this module, you will be able to:  Explain how static power is different from dynamic power  Describe the impact a smaller device geometry has on static power consumption  Define the relationship between leakage current and junction temperature  Describe some of the device data sheet information that pertains to power consumption

3 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 3 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 3 © 2009 Xilinx, Inc. All Rights Reserved Total Power = Static + Dynamic  Once the device has powered up, there are two main components to power consumption  Static power Primarily transistor leakage current – Source to Drain leakage IS →D – Gate to substrate leakage IGATE Some current from special circuits (DCM, etc)  Dynamic power Switching in the FPGA core and I/O Determined by CV 2 f – node capacitance, – supply voltage – switching frequency sourcedrain gate I GATE ISDISDISDISD Buf C

4 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 4 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 4 © 2009 Xilinx, Inc. All Rights Reserved The Industry Trend in Leakage Current  New Technologies  Smaller transistor length  Higher IS →D  Faster transistors (lower Vt )  Smaller Gate Oxide thickness  Higher (IGATE)  The total leakage for all transistors in the device – ICCINTQ = IS →D + IGATE  Even when the device is not doing a task it still draws some power – This leads to the development of new features such as Suspend and Hibernate mode  Smaller process geometries lead to higher static power Low V T Regular V T 220180150130907565 0.1 1 10 100 1000 Transistor I leakage Trend I leakage (nA/um) Technology Node

5 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 5 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 5 © 2009 Xilinx, Inc. All Rights Reserved Properties of Leakage Current Junction Temp °C Leakage Current 020406080100120140-20-40 25 °C 50 °C 85 °C 100 °C I CCINTQJunctionTemperature (T J °C) Normalized I CCINTQ Typical 251.00 501.46 852.50 1003.14  Leakage current increases dramatically with Junction Temperature

6 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 6 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 6 © 2009 Xilinx, Inc. All Rights Reserved Data Sheet Specifications  Iccintq, Iccoq, Iccauxq –These are the bare minimum currents (quiescent) required for your power supply to operate the device –Does not guarantee that your design is going to work, just that this is the minimum current –Dynamic power requirements will increase the required current during operation –Refer to the Spartan-6 FPGA Data Sheet or the Virtex-6 FPGA Data Sheet

7 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 7 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 7 © 2009 Xilinx, Inc. All Rights Reserved Data Sheet Specifications  Power-On requrements are greater than the operating current requirements –These are the bare minimum currents (quiescent) required for your power supply to power up the device –This is used for picking out a sufficient power supply –Does not guarantee that your design is going to work, just that the device will configure –Refer to the Spartan-6 FPGA Data Sheet or the Virtex-6 FPGA Data Sheet

8 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 8 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 8 © 2009 Xilinx, Inc. All Rights Reserved Design-Dependent Power  It is up to the user to plan on how much current their system can use – This is dependent on the design, FPGA, and other devices used in your system  It is also up to you to anticipate how much your worst case power consumption might be – Xilinx provides descriptions of the current draw your FPGA might have at power-up, during minimal operation, but not for worst-case conditions Too much is design dependent (resources used, clock frequency, etc.)  To get the best power estimate we offer a couple of power estimation tools – Please refer to the Power Estimation REL for more information

9 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 9 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 9 © 2009 Xilinx, Inc. All Rights Reserved Estimating Power Consumption  Power calculations can be performed at three distinct phases of the design cycle – Concept phase: A rough estimate of power can be calculated based on estimates of logic capacity and activity rates Use the Xilinx Power Estimator spreadsheet – Design phase: Power can be calculated more accurately based on detailed information about how the design is implemented in the FPGA Use the XPower Analyzer – System Integration phase: Power is calculated in a lab environment Use actual instrumentation  Accurate power calculation at an early stage in the design cycle will result in fewer problems later

10 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 10 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 10 © 2009 Xilinx, Inc. All Rights Reserved Summary  Static power is dependent on the transistor leakage current  Dynamic power is dependent on the switching of the logic in the CLB array and IOB resources  Smaller device geometry increases the static power consumption of all devices – Newer devices have a higher static power consumption  An increase in junction temperature dramatically increases the leakage current and your static power  The minimum current required to operate and configure the FPGA is provided in your FPGAs data sheet – But the best way to estimate your power consumption is with either the Xilinx Power Estimator spreadsheet or the XPower Analyzer utility

11 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 11 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 11 © 2009 Xilinx, Inc. All Rights Reserved Where Can I Learn More?  Xilinx online documents – www.support.xilinx.com www.support.xilinx.com Spartan-6 FPGA Power Management User Guide, UG394 – Introduces the Suspend and Hibernate modes – Describes the necessary voltage supplies – Introduces the low-power (-1L) devices – Describes the Power-On and Power-Down behavior – Power Estimation options are discussed

12 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 12 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 12 © 2009 Xilinx, Inc. All Rights Reserved Where Can I Learn More?  Xilinx Training courses www.xilinx.com/training www.xilinx.com/training – Designing with Spartan-6 and Virtex-6 Device Families course How to get the most out of both device families How to build the best HDL code for your FPGA design How to optimize your design for Spartan-6 and/or Virtex-6 How to take advantage of the newest device features  Free Video Based Training – How Do I Plan to Power My FPGA? – Power Estimation – What are the Spartan-6 Power Management Features? – What are the Virtex-6 Power Management Features?

13 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 13 © 2007 Xilinx, Inc. All Rights Reserved FPGA and ASIC Technology Comparison - 13 © 2009 Xilinx, Inc. All Rights Reserved Xilinx is disclosing this Document and Intellectual Propery (hereinafter “the Design”) to you for use in the development of designs to operate on, or interface with Xilinx FPGAs. Except as stated herein, none of the Design may be copied, reproduced, distributed, republished, downloaded, displayed, posted, or transmitted in any form or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Xilinx. Any unauthorized use of the Design may violate copyright laws, trademark laws, the laws of privacy and publicity, and communications regulations and statutes. Xilinx does not assume any liability arising out of the application or use of the Design; nor does Xilinx convey any license under its patents, copyrights, or any rights of others. You are responsible for obtaining any rights you may require for your use or implementation of the Design. Xilinx reserves the right to make changes, at any time, to the Design as deemed desirable in the sole discretion of Xilinx. Xilinx assumes no obligation to correct any errors contained herein or to advise you of any correction if such be made. Xilinx will not assume any liability for the accuracy or correctness of any engineering or technical support or assistance provided to you in connection with the Design. THE DESIGN IS PROVIDED “AS IS" WITH ALL FAULTS, AND THE ENTIRE RISK AS TO ITS FUNCTION AND IMPLEMENTATION IS WITH YOU. YOU ACKNOWLEDGE AND AGREE THAT YOU HAVE NOT RELIED ON ANY ORAL OR WRITTEN INFORMATION OR ADVICE, WHETHER GIVEN BY XILINX, OR ITS AGENTS OR EMPLOYEES. XILINX MAKES NO OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY, REGARDING THE DESIGN, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NONINFRINGEMENT OF THIRD-PARTY RIGHTS. IN NO EVENT WILL XILINX BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, EXEMPLARY, SPECIAL, OR INCIDENTAL DAMAGES, INCLUDING ANY LOST DATA AND LOST PROFITS, ARISING FROM OR RELATING TO YOUR USE OF THE DESIGN, EVEN IF YOU HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE TOTAL CUMULATIVE LIABILITY OF XILINX IN CONNECTION WITH YOUR USE OF THE DESIGN, WHETHER IN CONTRACT OR TORT OR OTHERWISE, WILL IN NO EVENT EXCEED THE AMOUNT OF FEES PAID BY YOU TO XILINX HEREUNDER FOR USE OF THE DESIGN. YOU ACKNOWLEDGE THAT THE FEES, IF ANY, REFLECT THE ALLOCATION OF RISK SET FORTH IN THIS AGREEMENT AND THAT XILINX WOULD NOT MAKE AVAILABLE THE DESIGN TO YOU WITHOUT THESE LIMITATIONS OF LIABILITY. The Design is not designed or intended for use in the development of on-line control equipment in hazardous environments requiring fail-safe controls, such as in the operation of nuclear facilities, aircraft navigation or communications systems, air traffic control, life support, or weapons systems (“High-Risk Applications”). Xilinx specifically disclaims any express or implied warranties of fitness for such High-Risk Applications. You represent that use of the Design in such High-Risk Applications is fully at your risk. © 2009 Xilinx, Inc. All rights reserved. XILINX, the Xilinx logo, and other designated brands included herein are trademarks of Xilinx, Inc. All other trademarks are the property of their respective owners. Trademark Information


Download ppt "FPGA and ASIC Technology Comparison - 1 © 2009 Xilinx, Inc. All Rights Reserved How Do I Plan to Power My FPGA?"

Similar presentations


Ads by Google