Presentation is loading. Please wait.

Presentation is loading. Please wait.

16 LDC borstplätering Tel: +46 248 17440 Damaged main bearing pocket to an large diesel engine repaired onsite.

Published byBarnaby Harris Modified over 8 years ago

Similar presentations

Presentation on theme: "16 LDC borstplätering Tel: +46 248 17440 Damaged main bearing pocket to an large diesel engine repaired onsite."— Presentation transcript:

1

2 www.ldc-brushplating.com 16 LDC borstplätering Tel: +46 248 17440 ldc@swipnet.se Damaged main bearing pocket to an large diesel engine repaired onsite a ship.

3 www.ldc-brushplating.com 16 LDC borstplätering Tel: +46 248 17440 ldc@swipnet.se The damages is grinded out and plating is started to build it to underersize.

4 www.ldc-brushplating.com4 Copper Plating is now finished. LDC borstplätering

5 www.ldc-brushplating.com 16 LDC borstplätering Tel: +46 248 17440 ldc@swipnet.se Copperplating is now finiched and start to machining

6 www.ldc-brushplating.com6 Line boring of all plated journals LDC borstplätering

7 www.ldc-brushplating.com 16 LDC borstplätering Tel: +46 248 17440 ldc@swipnet.se Main bearing pockets are now plated with a Nickelcap and back to original size.

8 www.ldc-brushplating.com 8 LDC borstplätering Tel: +46 248 17440 ldc@swipnet.se Plating on the engineblock for corrosion protection.

9 www.ldc-brushplating.com9 Corroded area is to be machined first. LDC borstplätering

10 www.ldc-brushplating.com 18 Machined pocket are being repaired with copper to bring it back to size. An other way to go is, machining to over size and brushplating with Nickel for an exelent corrosive protection and put in a sleeve made of stainless steel. LDC borstplätering Tel: +46 248 17440 ldc@swipnet.se

11 www.ldc-brushplating.com11 Copper plating is finished with a thickness of 1,5 mm. LDC borstplätering

12 www.ldc-brushplating.com12 Machining the copper back to nominal size. LDC borstplätering

13 www.ldc-brushplating.com13 Machining of the copper is now finished and ready for the final nickel capping. LDC borstplätering

14 www.ldc-brushplating.com14 Nickel plating is finished and the seat is back in size again and an excellent corrosion protection is made to save the surface fore several years from new corrosion. LDC borstplätering

15 www.ldc-brushplating.com15 The test results Wärtsilä have done after Nickel plating is weary good, after 22k running hours it was no corrosion on the Nickel plated areas. LDC borstplätering

Download ppt "16 LDC borstplätering Tel: +46 248 17440 Damaged main bearing pocket to an large diesel engine repaired onsite."

Similar presentations

Copyright 2008 - A/C Zincs Inc. C O R R O S I O N G R E N A D E TM The worlds first clamp-on corrosion inhibitor for air conditioning systems INTRODUCING.

Copyright A/C Zincs Inc. C O R R O S I O N G R E N A D E TM The worlds first clamp-on corrosion inhibitor for air conditioning systems INTRODUCING.
LDC borstplätering LDC borstplätering

LDC borstplätering LDC borstplätering
Bridge Corrosion A look at the corrosion of steel in Bridges.

Bridge Corrosion A look at the corrosion of steel in Bridges.
Stainless Steel By: Dawn McCandless.

Stainless Steel By: Dawn McCandless.
P LATING OF A EROSPACE M ATERIALS. Reason for use: Good corrosion resistance and preferred in Aerospace over Zinc Finish/Color: Typical colors include.

P LATING OF A EROSPACE M ATERIALS. Reason for use: Good corrosion resistance and preferred in Aerospace over Zinc Finish/Color: Typical colors include.
HT Series – High Temperature Technology 1 INTERPUMP GROUPS NEW PUMP LINE FOR CAR WASH AND INDUSTRIAL APPLICATIONS UP TO 85°C (185° F)

HT Series – High Temperature Technology 1 INTERPUMP GROUPS NEW PUMP LINE FOR CAR WASH AND INDUSTRIAL APPLICATIONS UP TO 85°C (185° F)
MarineMend Repair Kit Procedure

MarineMend Repair Kit Procedure
LDC borstplätering www.ldc-brushplating.com2 LDC Portable Electroplating 1.Cold process: used at room temperature, no stress or adjustments because of.

LDC borstplätering LDC Portable Electroplating 1.Cold process: used at room temperature, no stress or adjustments because of.
By Tyler Hanse.  Deposition of a thin layer of metal on a surface by an electrical process involving oxidation-reduction.

By Tyler Hanse.  Deposition of a thin layer of metal on a surface by an electrical process involving oxidation-reduction.
2 LDC borstplätering Tel: +46 248 17440 Crankshaft for large Diesel engine.

2 LDC borstplätering Tel: Crankshaft for large Diesel engine.
Hard Chrome Plating in Feedwater Pumps

Hard Chrome Plating in Feedwater Pumps
2 LDC borstplätering Tel: +46 248 17440 LDC Portable Electroplating 1.Cold process: Used at room temperature,

2 LDC borstplätering Tel: LDC Portable Electroplating 1.Cold process: Used at room temperature,
Dedicated to Repairing Sikorsky Rotor Blades. ABS started in June 1994 doing S-55 & S-58 blades. History.

Dedicated to Repairing Sikorsky Rotor Blades. ABS started in June 1994 doing S-55 & S-58 blades. History.
Specializing in: n Precision Machining n Sheetmetal Fabrication n Structural Fabrication n Metal Finishing n Painting/Powdercoating n Custom design/reverse.

Specializing in: n Precision Machining n Sheetmetal Fabrication n Structural Fabrication n Metal Finishing n Painting/Powdercoating n Custom design/reverse.
0 UNIVERSAL REPAIR PROGRAM: CATALYTIC CONVERTERS For petrol engines: Bosal nr = 099-870 Design = oval Engines up to 5.9L Total length (mm) = 419 Profile.

0 UNIVERSAL REPAIR PROGRAM: CATALYTIC CONVERTERS For petrol engines: Bosal nr = Design = oval Engines up to 5.9L Total length (mm) = 419 Profile.
DKN- Miniature Metal Bellows Couplings DKN Miniature Metal Bellows Coupling with Collet Clamp  Servo Quality: Extremely high torsional stiffness. For.

DKN- Miniature Metal Bellows Couplings DKN Miniature Metal Bellows Coupling with Collet Clamp  Servo Quality: Extremely high torsional stiffness. For.
LDC borstplätering www.ldc-brushplating.com2 LDC Portable Electroplating 1.Cold process: Used at room temperature, no stress or adjustments because of.

LDC borstplätering LDC Portable Electroplating 1.Cold process: Used at room temperature, no stress or adjustments because of.
EXCELERATOR ® BALL NOSE A great tool to increase your productivity!

EXCELERATOR ® BALL NOSE A great tool to increase your productivity!
Piston The piston comprises of two pieces, the crown and skirt. The crown is subjected to high temperatures in the combustion space and is liable to be.

Piston The piston comprises of two pieces, the crown and skirt. The crown is subjected to high temperatures in the combustion space and is liable to be.
The Finish Line is in site… Electrochemistry. “Oxidation-Reduction Reactions” LEO SAYS GER.

The Finish Line is in site… Electrochemistry. “Oxidation-Reduction Reactions” LEO SAYS GER.

Similar presentations

Ads by Google