3LDC borstplätering LDC Portable Electroplating Cold process: used at room temperature, no stress or adjustments because of termal distorsion.To tolerance: normaly no machining requiredQuick metal build-up: 0,05 mm in min.Plating: on all conductive materials, cast iron, stainless, mild steel, copper, chrome etcDense deposits: no or very little porosity in most coatingsMany differens metals: nickel, gold, silver, copper, cobolt, zinc and alloys.Excellent bonding: molecular bonding results in very god adhesion, all coatings can be machined, ground or polished.Mobile equipment: the repair can be done on site
4LDC borstpläteringRetainingrings, part of generator for powerstation, silverplated.
5LDC borstpläteringRetainingrings, part of generator for powerstation, silverplated.
6LDC borstpläteringBus bar, contact rods for the power generating industry, gold and silver coated contact-surfaces for increased conductivity.
7LDC borstplätering On-site plating job, shafts to be restored
8LDC borstpläteringElectric rotor with bad / worn bearing / seal areas repaired to original size.
9LDC borstpläteringElectric rotor with bad / worn bearing / seal areas repaired to original size.
10LDC borstpläteringEndcover of cast iron or Aluminium with worn /mismachined bearing seat corrected by LDC nickel.
11LDC borstpläteringWorn shaft on a turbine wing in power plant, to be repaired.
12LDC borstplätering Tel: +46 248 17440 firstname.lastname@example.org Onsite repair of 2 pieces of seal surfaces on a compressor shaft due to local wear damage. Built with the LDC-2904 Copper Hi-speed 0.5 mm.
13LDC borstplätering Tel: +46 248 17440 email@example.com Finished compressor shaft to its original dimensions, with a hard, dense top layer of the LDC-2874 Nickel Tungsten. With a hardness of 58 Hrc
14LDC borstpläteringBearing journals and sealareas can be repaired on a TurboshaftHighly polished cylinders with damages is corrected by LDC plating
15Propellershaft sleeve repaired on-site in England by LDC LDC borstpläteringPropellershaft sleeve repaired on-site in England by LDC
16LDC borstpläteringDocumented view of enlarged LDC-2807 Nickel layer, as part of quality control.
17LDC borstplätering Typical document of approval for LDC in Sweden.