Presentation on theme: "Army Geospatial Center"— Presentation transcript:
1Army Geospatial Center WinTEQCMark W. HuberArmy Geospatial Center
2WinTEQC Just a GUI front end on the UNAVCO’s TEQC Translation, Editing, and Quality CheckingVisual Basic front end on the UNAVCO TEQC utility
3Selected file is shown on the Input Tab Browse to file(s)Selected file is shown on the Input TabSelect file type then click on [Browse] to select input file. The input file will be shown in the Input1 tab. If the input file is in the manufacturer’s format, it will be converted to RINEX before being shown.
4Browse to file(s) – choose two files to concatenate The utility allows more than one input file. This will concatenate the two observations into one output file. This could be useful for those times when you had to restart occupation due to power shutdown or a cow brushes the tripod. OPUS will treat the gap as a large cycle slip. I have seen good results with a gap as large as 45 minutes.
5Default output file extension is “.teqc” Ability to split files into segments (useful for OPUS-RS).teqc is the default output file extension. The utility will also look for this extension when browsing for a RINEX input file. The user can edit the output filename. The output file will be created in the same directory as the input file(s)Caution - Do not make the output filename the same as the input filename.
6Ability to split files into segments (useful for OPUS-RS) User selects duration of output filesThe user can split in input file into shorter output files. Check in box and select the desired time span interval.WinTEQC uses TBIN for this operation. If you are looking to produce 2hr datasets for submission to OPUS, this option will not produce files acceptable to OPUS. TBIN will not include the hh-mm-00 on the even two hour. It instead stops the file at the last epoch before the even 2 hr.
7Ability to split files into segments (useful for OPUS-RS) User selects duration of output filesThe user can split in input file into shorter output files. Check in box and select the desired time span interval.WinTEQC uses TBIN for this operation. If you are looking to produce 2hr datasets for submission to OPUS, this option will not produce files acceptable to OPUS. TBIN will not include the hh-mm-00 on the even two hour. It instead stops the file at the last epoch before the even 2 hr.
8Choose to echo TEQC message Choose to create a DOS batch file which is useful for troubleshootingCheck the boxes to create a DOS batch file (teqc.bat) which will allow the user to run TEQC from a DOS Prompt or to show the messages output by TEQC. These are useful when troubleshooting. The batch file will contain all of the switches used for TEQC.
9Enter in new start and stop times using TEQC formatting Double click the textbox to pull up the slider.Double click in either the beginning or ending time to bring up a slider bar.
10Session length is displayed Slide to desired timeSession length is displayedThe slider bar allows the user to select a beginning and/or ending time. As the slide is being moved, the resultant occupation time will be displayed.
11Specify metadata (i.e. point name/number, agency, observer) User can set defaultsThe user can change the point number and name, the agency and observer.. The utility will remember the last defaults entered into the boxes. Check the boxes to use the dafaults.
12Delete satellites/systems This function is why this utility was created – useful with OPUS-ProjectsThe user can identify which satellites to omit in the output file. This is the reason why this frontend was developed. This will allow users of OPUS-Projects to improve their results by deleting satellites with large residuals.
13Specify the observables required separated by a '+' (Ex c1+l1+l2+p2) Options L1, L2, C1, P2, P1, D1, and D2The user can select which observables to include in the output file. Check the GPS Only box to delete all other GNSS observables.
14Decimate observations to specified interval The output epoch interval and elevation mask can also be specified. I am having trouble with the epoch interval on files that begin with a time that in not a whole second (millisecond off i.e seconds)
15If you are a TEQC techy and you remember the switches, you can enter them here The utility allows for additional switches to be included.
16[Execute] to preprocess the input file(s) The output RINEX file is displayed on the Output TabOnce the user has selected the options, click on [Execute] to produce the output file. The output file is displayed on the [Output] tab.
17[QC] will run the TEQC Quality Check on the selected input file Click on [QC] to produce a quality control report of the input file
18[QC] will run the TEQC Quality Check on the selected input file
19Choose either Outlook or Text Files The Utilities Tab will gather OPUS results and display them in tabular formChoose either Outlook or Text FilesThe utility can produce a tabular report of OPUS results. Select either Outlook or Text Files for the source of the data. You will then be asked to identify the Outlook folder or the drive directory.[Get Outlook Mail] will prompt for Inbox Folder[Get Text Files] will browse for folder
20[Copy] puts the output into the paste buffer The output tabulation will be put into the Paste Buffer by clicking on [Copy]
21Then you can paste into Excel or other programs The tabulation can then be pasted into other applications such as Excel where the user can perform additional analysis.
22You want to make sure that you always have the latest version of TEQC. The tabulation can then be pasted into other applications such as Excel where the user can perform additional analysis.
23Questions? WinTEQC email@example.com Please feel free to me with questions, issues, and suggestions.