We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byClayton Suit
Modified about 1 year ago
Page © ASME 2012 Standards and Certification Training Module A – Administrative A4Honors and Awards
Page © ASME 2012 ASME S&C Training Module A4 Honors and Awards1 REVISIONS CHANGEDATE Reformatted background, updated C&S to S&C throughout, revised pages 3, added summary page 15, updated websites on Page 16, and minor editorial revisions. Changed Codes and Standards Board of Directors to “Council on Standards and Certification” throughout. 12/17/12 11/22/11
Page © ASME 2012 Module A Course Outline A1. Tools and Resources A2. Codes and Standards Products A3. Membership Maintenance A4. Honors and Awards A5. Publishing Codes and Standards ASME S&C Training Module A4 Honors and Awards2
Page © ASME 2012 Learning Objectives At the end of this module you will be able to: –Understand the purpose of the Awards programs –Describe the honors and awards available to S&C volunteers –Understand the requirements to become an ASME Fellow ASME S&C Training Module A4 Honors and Awards3
Page © ASME 2012 Honors and Awards Program Purpose –To recognize outstanding contributions –To identify ASME with excellence Administration –Board of Governors –Committee on Honors –General Awards Committee –Special Awards Committees ASME S&C Training Module A4 Honors and Awards4
Page © ASME 2012 Honors and Awards Program Nomination –Any member or committee may make a nomination, except members of a committee that judges the nomination. Recommendation and Selection –These vary by award. ASME S&C Training Module A4 Honors and Awards5
Page © ASME 2012 General Information ASME Honors and Awards Web Site –Provides ASME and other engineering awards –Includes qualifications, recipients, procedures –See http://www.asme.org/governance/honors/ Honors Supplement –Lists Divisional, Regional, Sectional and S&C awards –See http://www.asme.org/about-asme/honors- awards/general-information ASME S&C Training Module A4 Honors and Awards6
Page © ASME 2012 Society Awards Sponsored by S&C Melvin R. Green Codes and Standards Medal –For outstanding contributions to standardization Bernard F. Langer Nuclear Codes and Standards Award –For contributions to the nuclear power plant industry Performance Test Codes Medal –For contributions to ASME Performance Test Codes ASME S&C Training Module A4 Honors and Awards7
Page © ASME 2012 Society Awards Sponsored by S&C Safety Codes and Standards Medal –For contributions to public safety J. Hall Taylor Medal –For distinguished service or eminent achievement in the field of piping and pressure vessels Patrick J. Higgins Award –For contributions to enhancement of standardization ASME S&C Training Module A4 Honors and Awards8
Page © ASME 2012 Other Society Awards Dedicated Service Award –Honors unusually dedicated voluntary service –Minimum 10 years service required –Each S&C VP may award one annually Pressure Vessel and Piping Award –Sponsored by Pressure Vessel and Piping Division –Honors outstanding contributions in the field ASME S&C Training Module A4 Honors and Awards9
Page © ASME 2012 Other Awards for S&C Volunteers Certificate of Appreciation (Society Award) –Awarded annually in appreciation and thanks for service –Recommended by consensus committee, approved by supervisory board –Generally awarded after 10 years or upon resignation Certificate of Acclamation (S&C Award) –Available annually to standards Committees –In recognition of product excellence –To individuals and small work groups –Standards Committee Chair nominates, approved by supervisory board ASME S&C Training Module A4 Honors and Awards10
Page © ASME 2012 Other Awards for S&C Volunteers Certificate of Achievement (S&C Award) –Available annually to Standards Committees –To recognize significant personal achievement –Candidate must be Approved by 90% of Consensus Committee Endorsed by Board ASME S&C Training Module A4 Honors and Awards11
Page © ASME 2012 Honorary Committee Membership Honorary Membership –Awarded by a committee to former members –Minimum 10 years of dedicated service, with significant contributions –Granted for life –Allows participation, but no vote –Candidate must be Approved by 90% of Consensus Committee Endorsed by Board ASME S&C Training Module A4 Honors and Awards12
Page © ASME 2012 ASME Fellow Description –Highest grade of membership –Recognizes exceptional achievements and contributions Prerequisites for nomination –Current ASME member –Ten years of active practice and ten years of continuous corporate membership in ASME or –Twenty years of active practice and five years of continuous corporate membership in ASME ASME S&C Training Module A4 Honors and Awards13
Page © ASME 2012 ASME Fellow Requirements –Career of significant engineering achievement At least one of the nine qualification categories (see http://www.asme.org/ governance/honors/fellows/qualification_categories.cf m) –Five sponsors, including The initiator At least three ASME members or Fellows ASME S&C Training Module A4 Honors and Awards14
Page © ASME 2012 Module Summary The Honors and Awards program recognizes outstanding contributions to the art and science of engineering. The ASME Honors and Awards Web site provides the various ASME honors and awards available. For each award, the web site provides the qualifications, lists past recipients, and explains the procedures for granting the award. ASME Fellow - Highest grade of membership and Recognizes exceptional achievements and contributions. ASME S&C Training Module A4 Honors and Awards15
Page © ASME 2012 REFERENCES –ASME Honors and Awards http://www.asme.org/about-asme/honors-awards –Achievement Awards http://www.asme.org/about-asme/honors-awards/achievement-awards –Dedicated Service Award Information and Forms http://www.asme.org/about-asme/honors-awards/service- awards/dedicated-service-awardhttp://www.asme.org/about-asme/honors-awards/service- awards/dedicated-service-award –Fellow Nomination Info and Forms http://www.asme.org/about-asme/honors-awards/fellows ASME S&C Training Module A4 Honors and Awards16
MODULE A - ADMINISTRATIVE SUBMODULES A1. Tools and Resources A2. Codes and Standards Products A3. Membership Maintenance A4. Honors and Awards A5. Publishing.
Page © ASME 2014 Standards and Certification Training Module A – Administrative A1. Tools and Resources ASME S&C Training Module A2. Standards and Certification.
Page © ASME 2012 Standards and Certification Training Module A – Administrative A3.Membership Maintenance.
IEEE Fellow Program E.Panayırcı IEEE Fellow Committee Member.
IEEE Fellow Program. IEEE Fellow status is granted to a person with an extraordinary record of accomplishments in any of the IEEE’s designated fields.
MODULE A - ADMINISTRATIVE. ASME C&S Training Module A1Slide 2 MODULE A - ADMINISTRATIVE SUBMODULES A1. Tools and Resources A2. Codes and Standards Products.
IEEE Fellow Program April 2008 Saint Julians, Malta Rosann Marosy.
Page © ASME 2015 Module B – Process B4.Initiating and Terminating Standards Projects Standards and Certification Training.
Awards Subcommittee Report Brett A. Bednarcyk NASA Glenn Research Center 1 Fall Structures TC Meeting November 11, 2012 Savannah, GA.
Systems Council Awards Jian Sun April 4, Introduction Professor at Rensselaer Polytechnic Institute Director of New York State Center for Future.
1. 2 “Recognizing outstanding achievement is one of the primary responsibilities of the Institute” Recognition: Membership Upgrades Honors & Awards.
HIGH PERFORMING CHAPTER PROGRAM Presented by Ed Carlsen Awards & Resources Committee Chair Regions 1-7 Chapters Meeting Tampa, Florida June 24, 2007.
ASME C&S Training Module A3 MODULE A - ADMINISTRATIVE SUBMODULES A1. Tools and Resources A2. Codes and Standards Products A3. Membership Maintenance A4.
MODULE B - PROCESS B1.ASME Organizational Structure B2.Standards Development: Staff and Volunteer Roles and Responsibilities B3.Conformity Assessment:
ASHRAE Honors and Awards Committee Honors and Awards Program.
2015 P&E Group Meeting P&E Tech Excellence Awards Update 2015 P&E Forum, Orlando, Florida 26 July 2015 Joaquin Castro, Deputy Director for Rocket, Space.
A Chance for the Kids Who Need It Most!. 10 Years of Educational Opportunity for PA Students in Need A Chance for the Kids Who Need It Most! Kids' Chance.
Standards and Certification Training Module B – Process B5Consensus Process for Standards Development ASME S&C Training Module B5 Consensus Process for.
AWARDS AND RECOGNITION COMMITTEE REPORT Region 2 Committee Meeting February 22-23, 2003 James H. Burghart.
Jay Chopra, Barb Moss, Courtney Gullion BPA Cares.
MODULE B - PROCESS. ASME C&S Training Module B1 DATESLIDECHANGE 10/31/03 17, 19, 20, 21, 22 & Notes, 23 & Notes 33 & Notes 36 Notes 41 Notes 44 References.
Recognition Tips for IEEE Sections & Chapters April 2009.
Associate Fellow Nomination Discussion John Dankanich February 3, 2015.
11 Technical Session 3 – Rulemaking Process: NRC and Industry Perspectives on Improving Quality, Timeliness, and Consistency in 10 CFR 50.55a Raymond (Ray)
1. 2 Recognizing outstanding achievement is one of the primary responsibilities of the Institute Recognition: Membership Upgrades Honors & Awards Recognition.
12-CRS /12 1 IEEE Region 1 Awards Region 1 Meeting 9 March 2013 Nita Patel 2013 R1 Awards Chair.
Awards Subcommittee Report Brett A. Bednarcyk NASA Glenn Research Center 1 Spring Structures TC Meeting April 9, 2013 Boston, MA.
ACM/SIG Services Orientation August 20 th, 2015 Irene Frawley, Ann Lane and Fran Spinola Listserv Bylaws CorporateSponsorship Awards StudentTravelGrants.
Region 1 Senior Member Elevation Program Concurrent with the Region 1 Board of Governor’s Meeting August 18, 2012 Harold Belson IEEE A & A Committee Member.
SOFTC : Honors and Awards Mike Rahmatipour, Chair, Awards Subcommittee 03/12/2011.
Officer’s Training 2013 Growing Your People: Awards and Recognition IEEE-SCV Officers Training, January 2013 Tom Coughlin, Coughlin Associates Director.
August 01, 2003 Dan Zrymiak – Chair, Feigenbaum Medal Committee1 ASQ Feigenbaum Medal GENERAL PRESENTATION.
Standards and Certification Training Module B – Process B3.Conformity Assessment: Committees and Staff Roles and Responsibilities.
MODULE B - PROCESS SUBMODULES B1.Organizational Structure B2.Standards Development: Roles and Responsibilities B3.Conformity Assessment: Roles and Responsibilities.
Dan Oprica: IEEE Awards Tutorial1 Santa Clara Valley IEEE 2004 Officers Training IEEE AwardsTutorial Presenter: Dan Oprica.
Page © ASME 2016 Module B – Process B8.ASME International Standards Development Standards and Certification Training.
Fellowship National Association for Healthcare Quality by Betty Brown, MBA, MSN, RN, CPHQ, FNAHQ Chief Quality and Patient Safety Officer Parkview Health.
Rewards & Recognition The NASA Shared Services Center (NSSC) is responsible for the day-to-day administration of awards. All award nominations are to be.
Bucket 6. President's Award Each year, several SME chapters select a member who has contributed more than any other during the previous year to support.
American Chemical Society 1 Region Awards Process Organizing Committee Awards Chair Region Board Awards Chair Call for Nominations Establish Deadline.
Women in Engineering (WIE) Wing-Kam Li R4 WIE Coordinator/ GOLD rep on WIEC Chicago, Jan 2007.
BENEFITS ADMINISTRATION MANUAL TRAINING: Merit Award Program Section 2100.
Recognition at the Local Level - Introduction L. Jane Hansen Western Region Director 8 August2014.
Awards Subcommittee Report Brett A. Bednarcyk NASA Glenn Research Center 1 Spring Structures TC Meeting Sept. 17, 2013 SWRI, San Antonio, TX.
IAWP Awards Training August Recognition of Excellence The IAWP awards program recognizes outstanding workforce professionals on the chapter/international.
+ Meeting of Assistant Professors June 29, Faculty and Academic Affairs Leadership Steven Abramson, M.D., Vice Dean for Education, Faculty and.
Medford Lakes School District Teacher of the Year Program 2012 PRESS to START.
Feinberg School of Medicine Faculty Promotion and Tenure Program June 2015.
© 2017 SlidePlayer.com Inc. All rights reserved.