Presentation is loading. Please wait.

Presentation is loading. Please wait.

Multiconn Srl PORSCHE PCM2.1 www.dasdvbt.com Installation and User Manual ver.1.0 [to integrate with the user manual of DAS M32/M44] [to integrate with.

Similar presentations


Presentation on theme: "Multiconn Srl PORSCHE PCM2.1 www.dasdvbt.com Installation and User Manual ver.1.0 [to integrate with the user manual of DAS M32/M44] [to integrate with."— Presentation transcript:

1 Multiconn Srl PORSCHE PCM2.1 Installation and User Manual ver.1.0 [to integrate with the user manual of DAS M32/M44] [to integrate with the user manual of DAS M32/M44] Fiber Optic

2 Multiconn Srl 2 (fig.4) DAS ® (fig.5) 2.Disconnect the original Fiber Optical cable (fig.4) from one of the original multimedia accessories inside the car (DVD, GPS, Amplifier, etc…) and match it directly to DAS ® fiber optic female connector of the harness on equipment (fig.5).4 45 Installation PCM 2.1: PCM 2.1 DAS ® 1.To install the DAS ® receiver, refer to the specific user manual; Warning on the connection of the power supply cable: RED wire (fig.3) must be DISCONNECTED. - RED wire (fig.3) must be DISCONNECTED. The switch (ON/OFF) of the receiver will be controlled by the Fiber-Optic activity The switch (ON/OFF) of the receiver will be controlled by the Fiber-Optic activity (fig.1) - YELLOW wire (fig.1) must be connected to the +12V permanent/battery (fig.2) - BLACK wire (fig.2) must be connected to the GND. Power supply cable1 2 3

3 DAS ® (fig.6)(fig.7) DAS ® (fig.8) 3.Match the two other connectors of DAS ® harness (fig.6) respectively inside the original accessory (fig.7) and the other one inside DAS ® receiver (fig.8). DAS ® (fig.8)(fig.9) and the needed accessory (DCABFK-RCA in fig.9.1)(fig.10) 4.Connect one of the 3 DAS ® Video-OUT (fig.8) trough the adapter cables on equipment (fig.9) and the needed accessory (DCABFK-RCA in fig.9.1) with the Video-IN on the Head Unit (fig.10) by the green Fakra connector. Multiconn Srl PCM 2.1

4 Multiconn Srl 4 DAS DAS Video-OUT green fakra WARNING: if the Head Unit module has not the green fakra connector, the car cannot accept an original or aftermarket TV tuner (fig.10) The PCM2.1 Head Unit module (fig.10) Video-IN PCM 2.1

5 User Manual: Multiconn Srl 5 DAS AV To enter in DAS TV tuner press AV. WARNING:For the basic settings such as color, contrast, brightness and format, please refer to the menu of the car and make sure that the format is congruent with the set menu on the DAS. WARNING: For the basic settings such as color, contrast, brightness and format, please refer to the menu of the car and make sure that the format is congruent with the set menu on the DAS. Previous Channel (LEFT) Next Channel (RIGHT) PCM 2.1

6 Multiconn Srl 6 Remote Control Functions: ON-OFF TURNING ON/OFF LEFT ARROW MENU NAVIGATION - ZAPPING KEY CONFIGURATION MENU/OK FUNCTIONS SET UP DAS MENU TV/RADIO SELECTION AND SEARCH SYSTEM NUMBER KEYPAD FOR CHANNEL PRE-SELECTION VOLUME ADJUSTMENT UP ARROW MENU NAVIGATION - ZAPPING KEY TV/AV1/AV2 SELECTION RIGHT ARROW MENU NAVIGATION - ZAPPING KEY DOWN ARROW MENU NAVIGATION - ZAPPING KEY KEYPAD ON NAVIGATION SYSTEM PCM 2.1

7 Multiconn Srl 2: UP arrow on remote control 7 Navigation System Controls 8: DOWN arrow on remote control 4: Left arrow on remote control 6: Right arrow on remote control 5: MENU/OK on remote control 7: DAS on remote control PCM 2.1

8 MULTICONN Srl Via Selvetta, Varese – Italy Tel Fax


Download ppt "Multiconn Srl PORSCHE PCM2.1 www.dasdvbt.com Installation and User Manual ver.1.0 [to integrate with the user manual of DAS M32/M44] [to integrate with."

Similar presentations


Ads by Google