1. NetComm Limited 1 NetComm IPDSLAM NetComm NCT1020 Micro NCT1000 Mini IP DSLAM June 2007

2. NetComm Limited 2 System Management Software Connection, Installation & Login AMCU GUI AAT24B GUI AESG GUI

3. NetComm Limited 3 The MCID software provides a Graphical User Interface (GUI), which can be used to configure, maintain, and operate a NCT-1000/1020 across a LAN. The MCID is able to control all the cards. Install the MCID management software by following the prompts. A shortcut icon of the NCT-1000/1020 MCID will be placed on your desktop. Click the icon to start the CID. MCID Management Craft Interface Device Connection & Installation Shortcut icon of the NCT-1000/1020 MCID connection System Management Software

4. NetComm Limited 4 1.Double click the MCID icon on the desktop to display the login menu. Enter the following information: IP Address (default = 172.16.7.100) Get Community (default = public) Set Community (default = private) DSL Concentrator Login 2. Click Start CID to enter the login screen of the device. Enter Username (default = root) Password (default = root) System Management Software

5. NetComm Limited 5 After login the screen will display as below. The figure below has labels for the location of the ACO button, shelf faceplate, and directory tree. The faceplate displays the installed units and their LED status. MCID Main Menu Directory Tree ACO Alarm Shelf faceplate System Management Software

6. NetComm Limited 6 To access the AMCU main control unit, select AMCU from the directory tree or click AMCU from the faceplate. Contents System >Configuration >Administration >VLAN configuration >VLAN PVID >Maintenance >System Software Upgrade AMCU Configuration Current Alarm History Alarm Alarm Event Exiting the AMCU AMCU GUI System Management Software

7. NetComm Limited 7 AAT24B GUI Contents Configuration >Port Information >Bath Configuration >Version >List Slot Configuration >Port Configuration Status Maintenance Performance Statistics Graphical Statics History Status Exit - The AAT24A ADSL 1 card has similar GUI - System Management Software

8. NetComm Limited 8 AESG GUI Contents Configuration: version, Card Configuration, Port Configuration Spanning Tree: Spanning tree function configuration on Up, Down, Giga Port 1 and Giga Port 2. Exiting the AESG System Management Software

9. NetComm Limited 9 IP DSLAM Firmware Upgrade

10. NetComm Limited 10 NCT1000/NCT1020 Firmware Upgrade Important rules: 1. Keep the TFTP sever and the MCID management software running for performing firmware upgrade. 2. The firmware upgrade sequence MUST be: AAT24A first, AES-G card 2nd and then AMCU the last. 3. For downgrade, you need to use "chkfile 0" to disable check file function by Telneting into the IP DSLAM. Firmware Upgrade

11. NetComm Limited 11 NCT1000 / NCT1020 Firmware List 1.AAT24A ADSL1 card firmware V2.03: Aat24A_V2.03.crz 2.AAT24B ADSL2+ card firmware V1.10: Aat24b_V110.crz 3. AES-G Ethernet uplink card firmware V3.3: AesgAP_v33.crz 4. AMCU Management card firmware V9.17N: Amcu-9.17N.crz MCID Management Software v1.39N1: IP-DSLAM-MCID-V139N1 Firmware Upgrade

12. NetComm Limited 12 Step 1: Network Setup for NCT1000 / NCT1020 Firmware Upgrade IP DSLAM IP Address: 172.16.7.100 Management PC IP Address: 172.16.7.10 IP DSLAM IP Address: 172.16.7.100 Management PC IP Address: 172.16.7.10 Firmware Upgrade

13. NetComm Limited 13 Step 2: Set up a TFTP server on the MCID management PC. For example Step 3: Set the IP address of the PC to be in the same subnet as that in the IP DSLAM. For example NCT1000/NCT1020 default IP address: 172.16.7.100/24 Management PC IP address: 172.16.7.10/24 Solar Winds- TFTP-Server Firmware Upgrade

14. NetComm Limited 14 Step 4: Upgrade the AAT24B ADSL2+ Card Login to “DSL Concentrator” MCID management software. Go to AMCU GUI >System > SW Upgrade > Select “Card Type” = AAT24A “File Type” = AP “TFTP Server IP Address” = 172.17.1.199 (This is the IP Address that is set to the management PC.) “Download File name” = Aat24aAP_v203.crz (Browse for the firmware file for AAT24A ADSL Line Card.) Then Click Transmit Firmware Upgrade

15. NetComm Limited 15 Step 4: Upgrade the AAT24A ADSL Line Card continued… The firmware upgrade for AAT24A will take a few minutes. The different status during FW Upgrade are as follows: Firmware Upgrade

16. NetComm Limited 16 Firmware Upgrade For downgrade, you need to use "chkfile 0" to disable check file function by Telneting into the IP DSLAM.

17. NetComm Limited 17 Step 5: Upgrade/Downgrade the AES-G Ethernet uplink Card Go to AMCU GUI >System > SW Upgrade > Select “Card Type” = AESG “File Type” = AP “TFTP Server IP Address” = 172.17.1.199 (This is the IP Address that is set to the management PC.) “Download File name” = AesgAP_v33.crz (Browse for the firmware file for AESG Uplink Card.) Then Click Transmit Firmware Upgrade

18. NetComm Limited 18 Step 5: Upgrade the AESG Ethernet uplink Card continued… The firmware upgrade for AESG will take a few minutes. The different status during FW Upgrade are as follows: Firmware Upgrade

19. NetComm Limited 19 Step 6: Upgrade the AMCU Management Card Go to AMCU GUI >System > SW Upgrade > Select “Card Type” = AMCU “File Type” = AP “TFTP Server IP Address” = 172.17.1.199 (This is the IP Address that is set to the management PC.) “Download File name” = Amcu-9.17N.crz (Browse for the firmware file for AESG Uplink Card.) Then Click Transmit Firmware Upgrade

20. NetComm Limited 20 Step 6: Upgrade the AMCU management card continued… The different status during FW Upgrade are as follows: Firmware Upgrade RESET AMCU Card

21. NetComm Limited 21 Step 7: Reboot the system to take effect on the new firmware for all cards. Go to AMCU > Maintenance > Reset System through MCID The GUI pop-up message are as follows: IP DSLAM RESTART now takes place. LED Sequence: All off -> Flashed yellow/orange then all red and LEDs on AAT24B self checking one by one. Estimated time for System Reset is approximately 2 minutes. Firmware Upgrade

22. NetComm Limited 22

23. NetComm Limited 23 Step 8: In order to control all the features in the latest firmware AAT24A V2.03 or Aat24B V1.10, AESG V3.3, AMCU V9.17N, the MCID V1.39N1 must be used. Remove MCID V1.33

24. NetComm Limited 24 Step 9: Installed MCID V1.39N1 IPDSLAM Management Utility to management the NCT1020 IP DSLAM. Installed MCID V1.39N1