Presentation on theme: "KX-TDE/NCP Version 7 Product Information"— Presentation transcript:
1 KX-TDE/NCP Version 7 Product Information Rev DD June 04, 2013Official software release of mass production version : 2013 June Mass production change : 2013 AugustPanasonic System Networks PBX SE teamSpecifications and schedule are subject to change without notice.
2 Feature List No. Feature 1 New IP-PT KX-NT5xx is supported. 2 Outgoing call log and incoming call log for extension call3Tenant based extension directory4Transfer to trunk after call is answered by cellular phone.5&6Other improvement2
3 Revision Edition No. Revision Date AA - 1st draft for PSN group internal studyDec 06, 2012BB4-5Example was added.Dec 15, 2012CC4-2This feature is available for not only “Keep Ring” Fwd but also other Fed.Jan 24, 2013DD4-6This page was removed.June 04, 20135&6Other improvements were added.3
5 1-1. KX-NT5xx - Specifications Version 7 NT5xxNew IP-PT KX-NT5xx is supported. - KX-NT5xx hardware is based on KX-UT which supports improved hands-free functionality compare to KX-NT3xx. - But software is based on KX-NT3xx to support full PBX features.KX-NT543 KX-NT KX-NT560 3-line LCD line LCD- BT headset feature is not available for KX-NT543 and NT BT headset feature available for KX-NT560 without option. - EHS (Electronics Hook Switch) is available for all KX-NT5xx.
6 1-2. KX-NT5xx - ConditionsVersion 7 NT5xxDifference from KX-NT3xx - KX-TDA0470 IPEXT16 card does not support KX-NT5xx. Therefore one KX-TDE or KX-NCP can support maximum KX-NT5xx by LAN port on MPR card. KX-NS1000 is recommended for more than 128 KX-NT phones Encryption is not supported. - Add-on key module is not available for KX-NT5xx. - Handset cord is longer.ModelSupported byKX-NT321 KX-NT343 KX-NT346MPR and IPEXT16KX-NT366MPRKX-NT5xxAdd-on 12-keyAdd-on 60-keyKX-NT3xx KX-DT 370mmKX-NT5xx KX-UT 580mmKX-NT346 with KX-NT303KX-NT346 with KX-NT305For example, hotel front staff can go to printer during talking.
7 1-3. KX-NT5xx - ConditionsVersion 7 NT5xxDifference from KX-UT - SBC cannot be used because not SIP based. - DTMF Tone cannot be sent to other IP extension during P2P talking. - Quantity of key is increased to support full PBX features.< KX-NT543 / KX-NT546 >⑨ Message ⑩ Pause ⑪ Flash ⑫ Redial⑰ Fwd/DND ⑱ Hold ⑲ Cancel ⑳ Intercom⑬ Auto Ans ⑭ Conf ⑮ Transfer ⑯ Auto Dial⑳ SP-Phone
9 Public Telephone Network 2-1. Call Log for Extension CallVersion 7 for PTOutgoing call log and redial are available for extension call also by programming.Public Telephone NetworkBranchHQIP Network<Dial using Log> 0/ /“Store” works for extension call also.102 can be saved newly using TDE-NCP version 7. Other dials are saved using TDE-NCP any version.
10 Public Telephone Network 2-2. Call Log for Extension CallVersion 7 for PTIncoming call log is available for extension call also by programming.Public Telephone NetworkBranchHQIP Network<Call back using Log> 0/ /102 and can be saved newly using TDE-NCP version 7. Other dials are saved using TDE-NCP any version.
11 2-3. Call Log for Extension Call Version 7 for PTProgramming - This feature is enabled for incoming call and outgoing call separately using system optional programming. - Default is “Enable”. - Specification of “Disable” is same as TDE-NCP version 6 or before.
12 2-4. Call Log for Extension Call Version 7 for PTCondition - When outgoing call log is available for extension call, old same phone number is deleted from outgoing call automatically. This is applied to both extension call and trunk call.TDE-NCP version 7 Outgoing Call Log : Enable for Extension CallTDE-NCP version 7 Outgoing Call Log : Disable for Extension Call or TDE-NCP version 6 or before => Same number is logged.If call 105, old 105 is deleted. Other dials are kept.This improvement is not applied to incoming call log because “How often” is important.
13 2-5. Call Log for Extension Call Version 7 for PTCondition - Call log for extension call does not wok for system wireless. However following new DECT handset can receive call log for extension call KX-TCA185 / KX-TCA285 / KX-TCA385
15 3-1. Tenant Extension Directory Version 7 TenantExtension directory can be limited for same tenant user only by programming.Tenant 1 : ABC TradingTenant 2 : Royal TravelAnn Bill Catherine Diana ElizabethAndrew CharlesExtension Directory does NOT display Andrew and Charles, when limitation is activated.Extension Directory displays Andrew and Charles also, when limitation is NOT activated.
16 3-2. Tenant Extension Directory Version 7 TenantProgramming - This feature is enabled using tenant programming. All Tenant : Can see directory of all extension (Default : Same as TDE/NCP version 6) Each Tenant : Can see directory of extension in same tenant only
17 TDA/TDE NCP/NS Any version 3-3. Tenant Extension DirectoryTDA/TDE NCP/NS Any versionConditions - DSS key is not limited for other tenant. - However flexible key programming can be limited to “one touch dial only” using extension programming. PT programming also can be restricted using COS programming.Above programming is available for KX-TDA/TDE/NCP/NS any version.
18 TDA/TDE NCP/NS Any version 3-4. Tenant Extension DirectoryTDA/TDE NCP/NS Any versionConditions - Cont - Extension call and call pick-up can be restricted for other tenant using COS programming. This restriction is applied to any operation regardless DSS key.Ann Bill Catherine Diana ElizabethAndrew CharlesCOS COS COS COS COS COS COS-5COS-1/2/3 cannot call COS-4/5. COS-4/5 cannot call COS-1/2/3. COS-4/5 can call COS-4/5. <More Information> COS-1/2 can call COS1/2. COS-1 cannot call COS-3. COS-2 can call COS-3. COS-3 can call COS-1/2/3. COS-1 : Employee COS-2 : Manager COS-3 : President Employee cannot call president. But president can call employee.Above programming is available for KX-TDA/TDE/NCP/NS any version.
20 Public Telephone or Cellular Network 4-1. Transfer from CellularVersion 7 CellularCellular phone users can transfer a call to extension in other PBX and outside telephone number, as well as extension in same PBX, after they received incoming call.Public Telephone or Cellular NetworkOfficeCustomerIn Russia, TDE to TDE connection using QSIG is very popular as solution for more than 1000 extensions. TDE V6 or before was strange for user. - Transfer to 102 : OK - Transfer to 105 : Not OKCellularDial # 102 or # 105 or # 0/ to transfer. # works as “Flash” of SLT.105 and can be destination of transferred newly using TDE-NCP version 7. Extension number such as 102 is destination of transfer using TDE-NCP any version.
21 101 Keep Ringing even after Fwd 4-2. Transfer from CellularVersion 7 CellularProgramming - Summary - Cellular phone has to be Fwd destination of extension. This feature is available for “keep ringing” mode also Or cellular phone has to be member of ICD group using virtual PS. - DISA connection has to be enabled to detect DTMF # and transfer destination. - ESVM card or MSG card on OPB3 card ch SVM circuit on MPR card - Activation key is required to detect DTMF # KX-NCS3910 for KX-NCP KX-NCS4910 for KX-TDE KX-NCS4950 for KX-TDE /9 + Caller ID of cellular phone has to be assigned as extension using system speed dial programming. COS of the extension is applied to transfer call trunk for transferring (Same programming as Automatic walking COS through DISA) - If caller ID of cellular phone is not assigned, COS of Trunk Group (trunk to call cellular phone) is applied.FwdCellular101 Keep Ringing even after Fwd
22 101 Keep Ringing even after Fwd 4-3. Transfer from CellularVersion 7 CellularProgramming Cellular phone has to be Fwd destination of extension. This feature is available for “keep ringing” mode also using Fwd No answer feature with keep ringing mode.FwdCellular101 Keep Ringing even after Fwd
23 4-4. Transfer from Cellular Version 7 CellularProgramming DISA connection has to be enabled to detect DTMF # and transfer destination.
24 4-5. Transfer from Cellular Version 7 CellularProgramming /9 + Caller ID of cellular phone has to be assigned as extension using system speed dial programming. COS of the extension is applied to transfer call trunk for transferring (Same programming as Automatic walking COS through DISA)Cellular101If extension cannot call international, paired cellular phone cannot transfer a call to international.
25 5-1. Caller ID for Cellular Version 7 CellularCaller ID of caller can be displayed on cellular phone, even if call is redirected from PBX to cellular phone. This service is available by some ISDN or SIP network in Europe. If incorrect “0” or “00” is displayed always, it can be removed by programming. See next page for programming.ISDN/SIP NetworkCellular NetworkDialOfficeCustomer“0” can be removed.EXTEXT
26 5-2. Caller ID for Cellular Version 7 CellularProgramming 2.System – 9. System Options – Option 7
28 6. SIP TrunkVersion 7 SIP“From Header” type is supported newly to receive caller ID from some SIP provider correctly ”P-Asserted-Identity Header” (Default) / “From Header”. Even when not only number but also character is sent as DDI number from SIP provider, DDI feature works from version 7. Other features are also improved for SIP from version 7.
Your consent to our cookies if you continue to use this website.